Fast determination of evaporation enthalpies of solvents and binary mixtures using a microsilicon chip device with integrated thin film transducers

A silicon chip device with two types of integrated platinum thin film resistors was applied for microcaloric measurements. It was shown that the device is capable of fast characterization of liquid evaporation behaviour and allows the determination of evaporation enthalpies for pure liquids and mixtures. The applicability was demonstrated for a wide range of solvents from nonpolar aliphatic solvents over polar organics to protic solvents (e.g. iso-octane, toluene, acetone, ethanol, methanol and water). The sample volumes were in the range of about 2-5 μL. The determination of transient times, in case of constant power mode, or the power integral over time was used for the fast estimation of binary liquid mixtures. Thermo-resistive measurements of 5 μL droplets of solvent mixtures like methanol/iso-propanol, ethanol/water, iso-octane/iso-propanol and iso-octane/1,4-dioxane showed significant changes in temperature characteristics and evaporation enthalpies in dependence on composition. The applied heating power was about 1 W, which corresponds to measurement times between a few seconds and a minute.     

Synthesis and characterization of new poly[phenylquinoxaline(ether)imides]

A series of new aromatic poly[phenylquinoxaline(ether)imides] were synthesized by solution polycondensation of aromatic diamines containing preformed phenylquinoxaline groups with dianhydrides having ether linkages and isopropylidene or hexafluoroisopropylidene units. All polymers are readily soluble in polar organic solvents (N-methylpyrrolidinone, DMF, dimethylacetamide) and in less polar liquids such as chloroform. Very thin coatings were deposited onto silicon wafers. According to atomic force microscopy, they had a smooth, pinhole-free surface. The polymers showed high thermal stability with decomposition temperatures above 470 °C and glass transition temperatures in the range of 210–238 °C, being thus characterized by a large gap between the glass transition and decomposition temperatures.Based on the report presented at the International Conference Modern Trends in Organoelement and Polymer Chemistry dedicated to the 50th year anniversary of the A. N. Nesmeyanov Institute of Organoelement Compounds of the Russian Academy of Sciences (Moscow, May 30–June 4, 2004).Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1952–1957, September, 2004.     

Spectroelectrochemical Measurements at Colloidal Au Multilayer Optically Transparent Electrodes

Application of thin colloidal Au multilayers on glass substrates as optically transparent electrodes is reported herein. Evaluation of the electrode by scanning electron microscopy and as an optically transparent thin layer electrode (OTTLE) illustrate its use for spectroelectrochemical applications. A spectroelectrochemical Nernst plot acquired for the oxidation of o‐tolidine yielded a value of E°=0.605 V (vs. Ag/AgCl) and n=1.88. Both of these values are in excellent agreement with previously published values obtained using a traditional Au minigrid OTTLE. The colloidal Au multilayer electrode is expected to offer many advantages over the minigrid OTTLE in specific applications. These advantages include direct control over microscopic surface topography, large electrochemical surface area, applicability to many different electrode geometries, and increased microscopic surface roughness for SERS and SPR applications.     

有机分子与聚电解质静电吸附成膜特性研究

选取多种有机分子及聚电解质，采用静电吸附自组装法制备了聚电解质，聚电解质、聚电解质，有机分子、有机分子，有机分子的复合薄膜，讨论了这些体系的静电吸附成膜特性及其成膜机理．     

Thermal study of irradiated polyacetylene films

Polyacetylene films irradiated by-rays up to 100 MRad were studied by means of TMA, DTG and DSC methods.It is shown that as the irradiation dose increases the concentration of topological branching knots into the polymer chains and theT _g values decrease, the total mass loss and the enthalpy of the thermal isomerization reaction also decrease.     

Crystallization Temperature Limit of (Ba,Sr)TiO<Subscript>3</Subscript> Thin Films Prepared by a Non Oxocarbonate Phase Forming CSD Route

A new chemical solution deposition (CSD) route for the fabrication of Ba_0.7Sr_0.3TiO₃ (BST) thin films has been developed which completely prevents the formation of an intermediate oxo-carbonate phase. The latter has been reported previously by several authors to be responsible for increased crystallization temperatures. Barium and strontium diaminoethoxides were synthesized starting from pure barium and strontium metal and aminoethanol. These alkoxides were found to be readily soluble in a wide range of solvents and thus were excellent candidates for the CSD process. To prepare a stable precursor solution the aminoalkoxides were dissolved in 2-butoxyethanol and then used for the deposition of BST thin films. We conclude that the minimum crystallization temperature of 600C to be independent of the formation of the oxo-carbonate phase. DTA-TGA were performed on the precursors and their solutions to study their decomposition behaviour. All films annealed at different temperatures were physically characterized by XRD, IR, and SEM. The films prepared by this route at 650C were found to have high dielectric constant and the leakage currents were comparable to BST films prepared by normal carboxylate based routes at 750C.     

关于超高分子量聚丙烯超拉伸膜的结构性能的研究——Ⅱ.形态结构变化对力学性能的影响

用X-射线衍射、动态力学测定等手段研究了不同拉伸倍数的超高分子量聚丙烯薄膜的力学性能的变化.以X-射线衍射法并基于串联力学模型的假设得到的各样品的表观晶区模量E_c~(app)约为34-38GPa.样品模量E_b随拉伸倍数增加而逐渐增大,其变化趋势与非晶区取向因子的变化相类似,说明非晶区取向是左右样品模量的重要因素.室温下,69倍拉伸样品的模量为27GPa,约为表观结晶模量的3/4,且其值在-150-160℃的温度范围内没有急剧变化,说明超拉伸明显改善了材料的力学性能及热稳定性.在各拉伸样品中,考虑伸直链结晶生成的可能性,利用并串联力学模型对伸直链结晶的体积分数做了估算,并对X-射线衍射法所得表观结晶模量进行了修正,认为室温下聚丙烯的真正晶区模量约为47GPa.     

Surface mixed adsorption films of 2,4,6- trimethylphenol–2,4,6-trichlorophenol at aqueous solution/air interface

 The results of experimental studies of the adsorption at the solution/air interface from an aqueous mixture: 2,4,6-trimethylphenol–2,4,6-trichlorophenol are presented. The surface properties of the above-mentioned mixture were studied by surface potential and surface tension measurements. These measurements were carried out as a function of the concentration of 2,4,6-trimethylphenol aqueous solution at a constant concentration of 2,4,6-trichlorophenol. Using the results obtained and based on the Gibbs equation, Helmholtz formula and Motomura’s method the relative surface excesses of adsorbed substances, effective dipole moments, surface molar fractions of solutes and miscibility of adsorbed films were determined. Received: 7 November 1997 Accepted: 26 February 1998     

[Co（H2o）4（NCS）2]（18—C—6）的薄层光谱电化学研究

利用光谱电化学方法来研究冠醚类化合物的文章尚未见报导.本文在测定用凝胶法合成的[Co(H_2O)(NCS)_2](18-C-6)的核磁共振谱和红外光谱的基础上,使用循环伏安法和薄层光谱电化学技术,在金微栅电极上测定了此配合物在乙腈溶剂中的第一步克式量电势(E~0′)和电子转移数(n),并推测了电还原反应机理.     

J-aggregation and its characterization in Langmuir-Blodgett films of merocyanine dyes

Langmuir-Blodgett (LB) films are constructed by successively transferring monomolecular layers formed at the air-water interface onto solid substrates. One of the advantages of the LB technique in fabricating molecular aggregates lies in the fact that it can employ various kinds of molecules by mixing them at the air-water interface. The mixed system may exhibit new properties that are not observed for individual components. This method would be useful, for example, in the studies of the formation and control of the J-aggregates of functional dyes that attract attention both in science and technology. In this paper, I review this subject mainly based on our recent results in merocyanines. LB films of merocyanine dyes, mixed with arachidic acid (C(20)), exhibit J-aggregate formation and have been serving as typical systems in revealing the physical and structural aspects of nanosized molecular aggregates constructed as monolayers. In the case of LB films of a merocyanine dye having benzothiazole as donor nucleus (abbreviated as DS), electron spin resonance (ESR) spectroscopy has been successful in determining the characteristic in-plane orientation of dye molecules with respect to the dipping direction, which led to the discovery of the flow orientation effect during the dipping process of LB films as the origin of optical dichroism often observed in LB films. In this article, after an introduction of ESR spectroscopy, three major topics on the merocyanine J-aggregation and its characterization in mixed films are discussed. The first topic is the observation and control of the size of J-aggregates in the dilution limit of dyes in arachidic acid matrix for a methyl-substituted DS (6-Me-DS). Dependence of atomic force microscopy (AFM) patterns on the molar ratio allows the identification of dye domains. J-band optical peak analysis based on the Kuhn's extended dipole model, supplemented by a novel application of femtosecond pump-probe optical spectroscopy, yields the size of the J-aggregates of 10(3). The second topic is the control of the J-band peak wavelengths by mixing two different kinds of dye molecules. The first case is the mixture of a J-forming 6-Me-DS and non-J-forming merocyanine analog, DO with benzo-oxazole instead of benzothiazole of DS. The second case is the mixture of both J-forming dyes but with different J-band peak positions, 6-Me-DS and another analog of 5-Cl-DS. The optical peak shifts depending on the molar mixing ratio will be presented. The last topic is related to the elucidation of electronic states of dye molecules in the J-aggregates. Light-induced ESR (LESR) of DS films with stable isotope ((15)N or (13)C)-substituted dyes provide clear evidence for the photoinduced charge transfer by the detection of hyperfine structures. Moreover, infrared (IR) spectroscopy of (13)C-enriched dye identifies the IR absorption peak of the relevant carbon in the chromophore. The results give evidence for the enhanced intramolecular charge transfer of dyes in the J-aggregates compared with an isolated merocyanine composed of donor and acceptor moiety. Lastly, the Cl attachment in 5-Cl-DS leads to a significant enhancement of the nitrogen hyperfine coupling in the LESR spectra. These examples and others demonstrate the potential of LB films of merocyanines in the studies of the nanosized molecular aggregates in monolayer assemblies.