Studies of the soluble part of oxidised coals

Soluble products obtained from the oxidation of four types of coal, each characterised by different degree of coalification and different degree of sulphur content, are studied. The coals are oxidised with peracetic acid (PAA) and nitric acid. Analyses are performed by Atmospheric Pressure-Temperature Programmed Reduction (AP-TPR) and Fourier Transform Infrared Spectroscopy (FTIR). The soluble products contain much more sulphur than the insoluble products of oxidation. The products obtained from the reaction with HNO₃ contain higher amounts of inorganic sulphur compounds, while those obtained from the reaction with PAA are characterised by an increased content of organic sulphur species.     

Thermostating in capillary electrophoresis

Summary The use of high voltages across a electrophoresis capillary will increase the temperature of the buffer due to Joule heating. As a result temperature control in CE is rather important since variations in the buffer temperature will result in changes in the pH of the buffer, peak shape, migration time, reproducibility, efficiency, 3-D structure of macromolecular analytes, etc. Six different thermostating systems have been evaluated: (i) natural convection, (ii) fan, (iii) home-made and (iv and v) two commercially available high-speed air and a (vi) liquid thermostated device. In all cases the temperature of the buffer in the capillary is calculated according to the temperature-conductivity relationship. For this purpose two parameters are introduced describing temperature control: the temperature onset (δT) and the temperature rise factor (α). From these results, it can be concluded that high speed air thermostating can be as efficient as liquid thermostating.     

Electrochemical response of ascorbic acid at conducting and electrogenerated polymer modified electrodes for electroanalytical applications: a review

The present short review deals with electroanalytical aspects of electrochemical response of ascorbic acid (Vitamin C) at conducting and electrogenerated polymer modified electrodes. Two main topics are considered: (i) electrocatalytic oxidation of ascorbate at conducting polymer modified electrodes, leading to electroanalytical techniques for ascorbate assay, and (ii) retardation of ascorbate penetration through a layer of electrogenerated polymers, leading to permselective coatings and their diverse uses, especially for biosensing devices.     

凹坑板式空气预热器的传热特性及多目标优化

以全焊接型凹坑板式空气预热器为对象,基于最优设计试验方案,运用Workbench Fluent软件数值模拟凹坑板片特征结构参数对传热流阻性能的影响。基于参数敏感度分析,得到单因素作用下对传热流阻性能的影响程度为凹坑的纵向间距>长轴>横向间距>深度。基于响应曲面法分析,得到多因素协同作用时,凹坑之间的结构参数横纵距对性能影响比凹坑自身的结构参数深径比大。基于遗传算法以摩擦因子f最小、努塞尔数Nu与综合换热因子J_F最大为优化目标,得到给定范围内的3组较优结构组合。     

人工干预压采条件下东风湖泉域地下水环境响应研究

为掌握我国北方典型岩溶泉域在人工干预条件下地下水的动态响应规律,以涉县东风湖泉域为研究对象,结合区内地质、水文地质、2011-2021年地下水位动态监测和地下水压采资料,在分析该地区地下水动态变化特征的基础上,运用GMS软件构建了在人工压采干预作用下的地下水流数值模拟模型,对地下水位变化趋势进行了预测。结果表明：①研究区地下水动态变化明显,具有周期性、滞后性,具体表现为4个变化阶段;②研究区内岩溶地下水整体呈现回升的状态,但是空间分布特征不同,上升区主要分布于下游地区;;③地下水类型为降水入渗-开采型,低水位期基本在5-6月,高水位期在1-2月;④在干预条件下,区内地下水位有着不同程度的回升,南部(下游)浅层水位响应特征值超过15m,中游地下水位响应特征值达到了5-10m,北部(上游)地下水位响应特征值为3-5m;上游和中游地下水位影响整体小于下游,下游水位响应尤为突出。该研究对于泉域内泉的保护以及地下水开发利用和保护具有重要的理论和实际意义。     

适用于DC/DC 变换器的预测函数控制优化策略

针对使用预测函数控制(Predictive Function Control, PFC)的 DC / DC 变换器在负载切换时产生的扰动对变 换器响应速度有较大影响的问题,提出通过设计观测器观测扰动来优化预测函数控制算法的控制效果;相对于其 他提高系统抗扰动的方法,通过设计观测器来提高变换器抗扰动的方法的优点是实现简单、优化后控制效果好等; 设计 Luenberger 观测器对负载切换时产生的扰动进行观测,将观测值反馈给预测函数控制算法进行最优化分析, 并结合仿真结果对目标函数进行调整,优化后的目标函数能更好地响应扰动并尽快达到稳态;最后将优化后的控 制算法与 PI 双闭环控制方法进行比较,结果显示优化后的控制算法在受到扰动后比双 PI 控制方法动态性能更 好,实现了应对负载切换时提高系统动态性能的目标,增强了 DC / DC 变换器的抗干扰能力;优化后的算法只考虑 了负载切换时的扰动对于系统其他方面的扰动没有考虑进去,可以通过设计整个系统的观测器来进一步提高 DC / DC 变换器抗扰动的能力。     

主动冷却点阵夹层防热结构温度响应计算模型北大核心CSCD

针对点阵夹层结构主动热防护问题,建立了夹层结构面板和芯体导热与冷却剂对流耦合的非稳态传热理论模型,利用有限体积法离散控制方程并在MATLAB中进行了迭代求解.模型首次考虑了面板与夹芯杆之间的收缩热阻,并利用分离变量法得到了收缩热阻的近似解析解.基于单胞模型和周期性边界条件,模拟得到了模型所需的表面对流传热系数h_(b)和h_(fin).最后,选取多单胞计算工况进行数值模拟和理论模型对比,并讨论了收缩热阻对模型预测精度的影响.结果表明:理论模型能够准确预测夹层结构及内部流体的温度变化,理论与仿真之间的最大误差不超过1%;随着外加热流密度不断增大,忽略收缩热阻使得计算结果造成的误差不断增大;与数值模拟相比,理论模型可显著地减少计算时间并节省计算资源,尤其适用于非均匀、非稳态复杂热载荷下点阵夹层结构的温度响应计算.     

Impact Responses of Prismatic Lithium-Ion Battery Based on the Membrane Factor Method北大核心CSCD

Aimed at the internal short circuit problem due to large deformation of the prismatic lithium-ion battery cell under impact loadings, a simplified battery model was first established. Then the motion equations of velocity and displacement based on the membrane factor method were proposed. With the effects of the face-sheet thickness and the densification region on the normalized final deflection, impact response characteristics of prismatic battery cells were investigated in detail. The results show that, the improved motion equations involving the membrane factor can reflect the dynamic response mechanisms of the prismatic battery cell under impact loadings, and the large deflection under high-speed impact can be predicted. With the increase of the face-sheet thickness, the deflection of the battery cell’s lower part decreases obviously. However, the densification region expands with the face-sheet thickness. The deflection and the densification region of the cell’s lower part both increase with the inner core density of the battery. This proposed impact model provides a theoretical guidance for the multi-functional integrated dynamic design of prismatic battery cells. © 2022 Editorial Office of Applied Mathematics and Mechanics. All rights reserved.     

灰色GM(1,1,k,k2)模型背景值及时间响应函数优化

本文提出了一种新的带有时间幂次项的灰色GM(1,1,k,k²)模型,给出了其灰微分方程和白化微分方程基本形式。基于最小二乘法获得了该模型参数估计值,并推导了该模型时间响应函数。鉴于GM(1,1,k,k²)模型灰微分方程与白化微分方程之间存在跳跃关系,首先对灰微分方程的背景值进行了优化,并推导了优化后的背景值计算公式。为了克服初始值的影响,根据误差平方和最小,进一步优化了GM(1,1,k,k²)模型时间响应函数。最后,该优化后的GM(1,1,k,k²)模型被应用于软土地基沉降预测,获得了较好的模拟预测效果,说明模型是可行的。     

Asymptotic Behavior of a Stochastic Predator-prey Model with Beddington-DeAngelis Functional Response and L\'{e}vy Jumps

A stochastic two-prey-one-predator model with Beddington-DeAngelis functional response and L\''{e}vy jumps is proposed and investigated in this paper. First of all, we prove the existence and uniqueness of the global positive solution, and stochastic ultimate boundedness of the solution. Next, under a simple assumption, by using It\^{o} formula and other important inequalities, some sufficient conditions are established to ensure the extinction and persistence in the mean of the system. The results show that neither strong white noise nor L\''{e}vy noise is conducive to the persistence of the population. Finally, the theoretical results are verified by numerical simulations.