Kinetic and Stoichiometric Parameters in the Production of Carotenoids by <Emphasis Type="Italic">Sporidiobolus salmonicolor</Emphasis> (CBS 2636) in Synthetic and Agroindustrial Media

With the objective of determining the kinetic behavior (growth, substrate, pH, and carotenoid production) and obtain the stoichiometric parameters of the fermentative process by Sporidiobolus salmonicolor in synthetic and agroindustrial media, fermentations were carried out in shaken flasks at 25°C, 180 rpm, and initial pH of 4.0 for 120 h in the dark, sampling every 6 h. The maximum concentrations of total carotenoids in synthetic (913 μg/L) and agroindustrial (502 μg/L) media were attained approximately 100 h after the start of the fermentative process. Carotenoid bioproduction is associated with cell growth and the ratio between carotenoid production and cell growth (Y _P/X) is 176 and 163 μg/g in the synthetic and agroindustrial media, respectively. The pH of the agroindustrial fermentation medium varied from 4.2 to 8.5 during the fermentation. The specific growth rate (μ _X) for S. salmonicolor in synthetic and agroindustrial media was 0.07 and 0.04 h⁻¹, respectively. The synthetic medium allowed for greater productivity, obtaining maximum cell productivity (P _x) of 0.08 g L⁻¹ h⁻¹ and maximum total carotenoid productivity (P _car) of 14.2 μg L⁻¹ h⁻¹. Knowledge of the kinetics of a fermentative process is of extreme importance when transposing a laboratory experiment to an industrial scale, as well as making a quantitative comparison between different culture conditions.     

Environmental biodegradation of synthetic polymers I. Test methodologies and procedures

Biodegradation of synthetic polymers is an important property that is used in many applications. Evaluation of the extent of biodegradation has used different methods in recent years. For each environmental compartment, different approaches have to be made in order to obtain valuable data on biodegradability.This review describes validated and accepted methods based on standardized biodegradation tests, analytical tests, enzymatic tests or tests of physical properties to evaluate the biodegradability of synthetic polymers for different types of environmental compartments (e.g., soil, compost or aqueous media).Part II of this review will subsequently report on the environmental biodegradation of different groups of synthetic polymers.     

高分子共混物中氢键的作用Ⅱ.氢键对高分子共混物性能的影响以及引入方法

高分子共混物中氢键的存在能促进共混组分具有更好的可混和性.因此,研究高分子共混物中的氢键对高分子的共混改性具有重要的理论和实用价值.本文是<高分子共混物中氢键的Ⅰ.氢键的特征描述以及影响因素>的下篇,将继续介绍高分子共混物中氢键的作用,主要包括氢键对高分子共混物性能的影响以及主要的引入氢键的方法.特别地,本文通过将高分子共混物分为合成高分子与合成高分子共混物,合成高分子与天然高分子共混物以及合成高分子与其它物质共混物,总结了氢键存在对共混物性能的影响.     

Selective recognition of ovalbumin using a molecularly imprinted polymer

Micro-contact imprinting has been used to form thin-film molecular imprints of ovalbumin (OVA) in polymers supported on glass slides. Thermocalorimetric data was used to optimise the choice of functional monomer and cross-linker to maximise selectivity and minimise non-specific recognition.A polymer comprising polyethyleneglycol 400 dimethacrylate (95 vol.%) and methacrylic acid (5 vol.%) showed both maximum recognition for OVA when made as a molecularly imprinted polymer (MIP), and minimal recognition when made as a non-imprinted, i.e. control polymer. OVA rebinding to the molecularly imprinted polymer, from a buffered 2 µM OVA solution, was 1.55 × 10^{− 11} mol cm^{− 2}, while the control polymer showed 10-fold less re-binding, i.e. 0.154 × 10^{− 11} mol cm^{− 2}.Experiments in which human serum albumin (HSA), conalbumin, ovomucoid or lysozyme, were re-bound to the polymers, either as single proteins or in competition with OVA, showed them to have low affinity for the polymer formulation used. Of the competing proteins examined, in non-competitive binding experiments, HSA showed the greatest affinity 0.45 × 10^{− 11} mol cm^{− 2} for the OVA imprinted polymer. In two protein competition experiments, i.e. with OVA and a competing protein present at equal concentrations (2 µM), OVA binding to the OVA imprinted polymer was in all cases significantly greater than that of the competitor.     

Determination of synthetic polycyclic musks in water by microwave-assisted headspace solid-phase microextraction and gas chromatography-mass spectrometry

This paper describes a rapid and solvent-free method, microwave-assisted headspace solid-phase microextraction (MA-HS-SPME), for the extraction of six commonly used synthetic polycyclic musks: galaxolide (HHCB), tonalide (AHTN), celestolide (ADBI), traseolide (ATII), cashmeran (DPMI) and phantolide (AHMI) from water samples prior to their determination using gas chromatography-mass spectrometry (GC-MS). The effects of various extraction parameters for the quantitative extraction of these analytes by MA-HS-SPME were systematically investigated and optimized. The analytes in a 20-mL water sample (in a 40-mL sample-vial containing 4 g of NaCl) were efficiently extracted by a polydimethylsiloxane-divinylbenzene (PDMS-DVB) fiber placed in the headspace when the system was microwave irradiated at 180 W for less than 4 min. The limits of detection (LODs) ranged from 0.05 to 0.1 ng/L, and the limits of quantification (LOQs) were less than 0.2 ng/L. A preliminary analysis of wastewater samples revealed that HHCB and AHTN were the two most commonly detected synthetic polycyclic musks; using a standard addition method, their concentration were determined to range from 1.2 to 37.3 ng/L with relative standard deviation (RSD) ranging from 2 to 6%. The results obtained using this approach are better than those from the conventional oil-bath HS-SPME.     

Bi(NO3)3 · 5H2O mediated synthesis of 4,4′-diaminotriarylmethane leuco malachite compounds under solvent-free conditions

In this report, we described the synthesis and characterization of a variety of diaminotriarylmethane derivatives with dimethylamino functional groups. These compounds were synthesized by the tandem regio-selective electrophilic aromatic substitution reaction of N,N-dimethylaniline with aryl aldehydes to form the corresponding diaminotriarylmethane compounds. In our strategy, Bi(NO₃)₃ was used as a catalyst under solvent free conditions to afford the desired products in good to excellent yields.      

Diastereoselective synthesis of aziridine esters via amino selanyl esters

A synthesis of aziridine esters based on the cyclisation of amino selanyl esters induced by the selanyl group activation was developed with either the Meerwein salt or NBS. Two asymmetric approaches are proposed: the diastereoselective reductions of α-selanyl β-iminoesters derived from α-oxoesters, which lead to cis chiral aziridine esters 6 and 6′; and the diastereoselective conjugate additions of a chiral amide to α,β-unsaturated esters providing trans chiral aziridine esters 6 and 6″.     

Large-scale pyrosequencing of synthetic DNA: a comparison with results from Sanger dideoxy sequencing

Pyrosequencing is a relatively recent method for sequencing short stretches of DNA. Because both Pyrosequencing and Sanger dideoxy sequencing were recently used to characterize and validate DNA molecular barcodes in a large yeast gene-deletion project, a meta-analysis of those data allow an excellent and timely opportunity for evaluating Pyrosequencing against the current gold standard, Sanger dideoxy sequencing. Starting with yeast genomic DNA, parallel PCR amplification methods were used to prepared 4747 short barcode-containing constructs from 6000 Saccharomyces cerevisiae gene-deletion strains. Pyrosequencing was optimized for average read lengths of 25-30 bases, which included in each case a 20-mer barcode sequence. Results were compared with sequence data obtained by the standard Sanger dideoxy chain termination method. In most cases, sequences obtained by Pyrosequencing and Sanger dideoxy sequencing were of comparable accuracy, and the overall rate of failure was similar. The DNA in the barcodes is derived from synthetic oligonucleotide sequences that were inserted into yeast-deletion-strain genomic DNA by homologous recombination and represents the most significant amount of DNA from a synthetic source that has been sequenced to date. Although more automation and quality control measures are needed, Pyrosequencing was shown to be a fast and convenient method for determining short stretches of DNA sequence.     

环肽合成研究

环肽由于其稳定的结构特性在生物模拟,药物设计,纳米与分子器件,生物传感器以及催化剂等方面起着越来越重要的作用,本文介绍了近年来环肽化合物的合成及其应用的一些进展。     

关于法律解释的原则与方法的几点思考

社会的发展让人们逐步认识到法律解释的重要性,对于法律解释的定性存在着法律决定论和法官主观论两种对立的立场,由此又导致了原则与规则适用的不同,为了解决疑难案件,就要进行必要的法律解释。法律解释方法多种多样,主要有文义解释、体系解释、目的性解释以及其他解释。