Methanethiolate structural phases on Cu{1 1 1} observed using a novel fibre-optic low-energy electron diffraction instrument

We have used a novel fibre-optic low-energy electron diffraction (FO-LEED) instrument, capable of low flux measurements that minimise electron beam damage to surface overlayers, to study methanethiolate (CH₃-S-) structural phases formed on Cu{1 1 1} at temperatures between 110 and 300 K. Three structural phases were seen: a (√3 × √3)R30° phase that forms at 110-140 K; a (4 × 4) phase which was observed transiently at 110 K; and a pseudo-{1 0 0} reconstructed phase which forms at room temperature. We discuss these in the context of previous studies of this system, and demonstrate the ability of the FO-LEED instrument to record high-quality LEED patterns and intensity data from a strongly beam-sensitive surface.     

Surface characterization of plasma deposited nano-structured fluorocarbon coatings for promoting in vitro cell growth

Nano-structured “teflon-like” coatings characterized by highly-fluorinated, random, ribbon-shaped, micrometers-long structures were deposited on polyethylenetherephtalate (PET) substrates by plasma enhanced-chemical vapour deposition (PE-CVD) using modulated radiofrequency (RF, 13.56 MHz) glow discharges fed with C₂F₄ in modulated discharge (MD) and continuous wave (CW) regimes. Surfaces obtained in this way featured identical chemical composition and different roughness in the nanometric scale. Water contact angle (WCA) measurements, scanning electron microscopy (SEM) and atomic force microscopy (AFM) were utilized to characterize the surfaces. A positive relationship was shown to exist between the WCA value and the mean nano-structure height and the area root-mean-square (RMS) roughness of coatings. The possibility of obtaining coatings of varying nano-structure height, i.e., roughness, in a nanometric scale represents a promising result for further use of these surfaces as substrates for experiments on cell adhesion, proliferation and growth.     

Growth of Pt thin films on WSe2

The morphology and structure of Pt deposited on a WSe₂(0 0 0 1) van der Waals surface have been investigated by reflection high energy electron diffraction and scanning tunneling microscopy. At room temperature, the initial growth is characterized by the formation of three-dimensional fcc Pt islands with (1 1 1) orientation. In contrast, at higher temperatures of about 450 °C the formation of a novel chemically ordered Pt-Se alloy is observed. Based on the diffraction patterns, a tetragonal DO₂₂-type structure of a Pt₃Se compound is suggested. With increasing Pt thickness, this chemically ordered alloy disappears and an additional superstructure occurs, which is accompanied by the coalescence of the islands. The observed superstructure is attributed to a strong Se diffusion towards the growth surface, forming most likely a PtSe₂ alloy with the CdI₂-type layered structure on the top surface. Due to the lateral lattice mismatch between the Pt(1 1 1) layers and the PtSe₂(1 1 1) top layer, a Moiré pattern with a period of 1.1 nm is created, which might be used as a long-range atomic pattern for further nanostructure growth.     

A study of Ga layers on Si(1 0 0)-(2 × 1) by SR-PES: Influence of adsorbed water

Results for deposition and thermal annealing of gallium on the Si(1 0 0)-(2 × 1) surface achieved by synchrotron radiation photoelectron spectroscopy (SR-PES) and low energy electron diffraction (LEED) are presented. In addition to deposition of Ga on a clean surface, the influence of water adsorption on the arrangement of gallium atoms was also studied. The results on Ga deposition at a higher temperature (490 °C) are consistent with a Ga ad-dimer model showing equivalent bond arrangement of all Ga atoms for coverages up to 0.5 ML. The deposition onto a surface with adsorbed water at room temperature led to a disordered gallium growth. In this case gallium atoms bind to silicon dimers already binding fragments of adsorbed water. A subsequent annealing of these layers leads to a surface structure similar to the Ga-(2 × 2), however, it is less ordered, probably due to the presence of silicon oxides formed from water fragments.     

Atomic force microscopy study of surface morphology change in spinel LiMn2O4: Possibility of direct observation of Jahn-Teller instability

Surface morphology in 3.5 × 3.5 μm² area of spinel LiMn₂O₄, which is a typical cathode material for Li ion secondary batteries, is studied using an atomic force microscopy (AFM) with a conductive probe. Negative bias voltage is applied to the probe to attract Li⁺ ions toward LiMn₂O₄ surface during the AFM observation. Before applying the voltage (0 V), the whole LiMn₂O₄ surface is covered with scale-shaped grains. Under the negative voltage of 5.5 V, electric current abruptly increases, indicating Li⁺ ionic conduction. Simultaneously, part of the scale-shaped grains expand and flatten. Jahn-Teller phase transition, which is induced by the repulsive interaction between the Mn-e_g and O-2p electrons in Li accumulated layer, is proposed as a possible origin of these results.     

Surface structure of In/Si(1 1 1) studied by reflection high-energy positron diffraction

We have investigated a quasi-one-dimensional structure of In/Si(1 1 1) surface using reflection high-energy positron diffraction (RHEPD), which is sensitive to the topmost surface structure under the total reflection condition. From the rocking curves, we found that In atoms are located at two different vertical positions, i.e., 0.99 Å and 0.55 Å from the Si zigzag chain in both 4 × 1 (210 K) and 8 × 2 (60 K) phases.     

Influence of aliphatic spacer group on adsorption mechanisms of phosphonate derivatives of l-phenylalanine: Surface-enhanced Raman, Raman, and infrared studies

The nature of phosphonopeptides containing N-terminal l-phenylalanine (l-Phe), namely l-Phe-dl-NH-CH(CH(CH₃)₂)-PO₃H₂ (A), l-Phe-l-NH-CH(CH₃)-PO₃H₂ (B), and l-Phe-dl-NH-CH(CH₂CH₂COOH)-PO₃H₂ (C) (Fig. 1 presents molecular structure of these molecules), adsorbed on electrochemically roughened and colloidal silver surfaces has been explored by surface-enhanced Raman spectroscopy (SERS). To reveal adsorption mechanism of these species on the basis of their SERS spectra at first Fourier-transform Raman (FT-RS) and absorption infrared (FT-IR) spectra of non-adsorbed molecules were measured. Examination of enhancement, frequency shifts, and changes in relative intensities of SERS bands due to adsorption and surface roughens variation reveals that the tilted compounds adsorb on the electrochemically roughened silver substrate in similar way, while they behave differently on the colloidal silver surface. A stronger enhancement of in-plane ring vibrations of the l-Phe ring, i.e., ν₃ and ν_18b (B₂), over these of the A₂ symmetry in all SERS spectra on the electrochemically roughened silver substrate suggests that the ring interacts with this surface adopting slightly deflect orientation from the perpendicular one. Also, enhancement of PO and -CH₂-/-CH₃ fragments vibrations points out that they are involved in adsorption process on this substrate. This conclusion was drawn on the basis of the enhancement of 1274-1279 and 1138-1152 (ν(PO)), 1393-1400 (δ(CH) + ρ_b(CNH₂) + ν(C-C_O) + δ(CH₃)), ∼1455 (δ(CCH₃/CCH₂) + ρ_b(CH₃/CH₂), and 1505-1512 cm⁻¹ (δ(CH₂) + Phe(ν_19a)) bands. Although a relative intensity ratio of these bands in the presented SERS spectra is different. On the other hand, on the colloidal silver nanoparticles, the aromatic ring of all molecules is lying flat or takes almost parallel orientation to this surface. Besides, A interacts also via P-terminal group (568, 765, 827, 1040, and 1150 cm⁻¹), whereas B mainly through NH₂-C-(CO)-CNH-(712 and 1255 cm⁻¹). In the case of C, it adsorbs on the silver colloidal surface mainly through the aromatic ring of l-Phe, while other fragments of the molecule are in close proximity to this surface as comes off the weak enhancement of bands due to the aliphatic vibrations.     

Geometric and electronic structure of positively and negatively poled LiNbO3 (0 0 0 1) surfaces

The effect of ferroelectric poling direction on the structure and electronic properties of the LiNbO₃ (0 0 0 1) surface was characterized. Low energy and reflection high energy electron diffraction indicated that both the positively and negatively poled surfaces were (1 × 1) with no evidence of longer range periodic reconstructions. Low energy ion scattering spectra from both surfaces were dominated by scattering from oxygen atoms. X-ray and ultraviolet photoelectron spectra also showed little difference between the positively and negatively poled surfaces, with the exception of a high binding energy shoulder on the O 1s core level of the negative surface. Exposure of the surfaces to atomic hydrogen caused reduction of the surface Nb rather than an increase in intensity on the high binding energy side of the O 1s peak, indicating that the shoulder on the O 1s peak on the negative surface was not due to surface hydroxyl groups. Temperature programmed desorption measurements indicated that the nearly stoichiometric LiNbO₃ samples were susceptible to loss of Li₂O starting at temperatures as low as 500 K, independent of the poling direction. An adatom/vacancy model is proposed in which oxygen ad-anions accumulate on one side of the crystal while oxygen anion vacancies are created on the opposite surface. This model can explain the apparent oxygen termination of both surfaces and the observed (1 × 1) periodicity of the surfaces, and also effectively screens the thickness dependent electric field associated with the polar orientation of the crystal.     

Corona-induced graft polymerization for surface modification of porous polyethersulfone membranes

Graft polymerization of acrylic acid (AA) onto porous polyethersulfone (PES) membrane surfaces was developed using corona discharge in atmospheric ambience as an activation process followed by polymerization of AA in aqueous solution. The effects of the corona parameters and graft polymerization conditions on grafting yield (GY) of AA were investigated. The grafting of AA on the PES membranes was confirmed by ATR-FTIR and X-ray photoelectron spectroscopy (XPS) analysis. Porosimetry measurements indicate the average pore diameters and porosities of the modified membranes decrease with the increase of the GY. The hydrophilicity and surface wetting properties of the original and modified membranes were evaluated by observing the dynamic changes of water contact angles. It is found that the grafting of AA occurs not only on the membrane surfaces, but also on the pore walls of the cells inside the membrane. The permeability experiments of protein solution reveal that the grafting of PAA endows the modified membranes with enhanced fluxes and anti-fouling properties. The optimized GY of AA is in the range of 150-200 μg/cm². In addition, the tensile experiments show the corona discharge treatment with the power lower than 150 W yields little damage to the mechanical strength of the membranes.     

Scaling of submonolayer island growth with reversible adatom exchange in surfactant-mediated epitaxy

Surfactant-mediated epitaxial growth is studied with a realistic model, which includes three main kinetic processes: diffusion of adatoms on the surfactant terrace, exchange of adatoms with their underneath surfactant atoms, and reexchange in which an exchanged adatom resurfaces to the top of the surfactant layer. The scaling behavior of nucleus density and island size distributions in the initial stage of growth is investigated by using kinetic Monte Carlo simulations. The results show that the temperature dependence of nucleus density and island size distributions governed by the reexchanging-controlled nucleation at high temperatures exhibits similar scaling behavior to that obtained by the standard diffusion-mediated nucleation at low temperatures. However, at intermediate temperatures, the exchanging-controlled nucleation leads to an increase of nucleus density with temperature, while the island size distribution scales to a monotonically decreasing function, showing nonstandard scaling behavior.