基于语义WEB的远程学习支持系统构建

在概述语义WEB的基础上,设计一个面向学习者用户网站的语义WEB体系结构,提出了多代理结构的学习支持系统中的学习者模型本体和学习者模型代理.目的是为了说明建立学习者本体及其代理对于学习者的有效学习所带来的益处.     

Surface and interfacial properties of PVDF/acrylic copolymer blends before and after UV exposure

Morphological and chemical properties of both the surface and interface of poly(vinylidene fluoride)/poly(methyl methacrylate)-co-poly(ethyl acrylate) (PVDF/PMMA-co-PEA) blend films have been investigated before and after the samples were exposed to ultraviolet (UV) irradiation using a xenon arc lamp at 50 °C and 9% relative humidity (RH) for 7 months. Surface and interfacial morphologies were studied by atomic force microscopy (AFM). Chemical composition information was obtained by confocal Raman microscopy, attenuated total reflection-FTIR spectroscopy (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), and contact angle measurements. Results show an enrichment of the PVDF material at the air surface, while the acrylic copolymer enriches the interface. Blends having greater than 50% mass fraction of PVDF show little change in the surface morphology after UV exposure for 7 months. However, for a lower PVDF content, blends exhibit significant degradation of PMMA-co-PEA copolymer and a much rougher surface after UV exposure. Microstructural changes in the PVDF spherulites are also observed after UV degradation. It is found that the surface and interfacial morphologies are correlated with the chemical properties.     

油田含聚废水处理方法研究

介绍了JCS净水剂在油田含聚丙烯酰胺污水处理中的应用、基本工艺流程、最佳投加量以及成本。     

Property improvement of pulsed laser deposited boron carbide films by pulse shortening

Growth characteristics and surface morphology of boron carbide films fabricated by ablating a B₄C target in high vacuum with a traditional KrF excimer laser and a high brightness hybrid dye/excimer laser system emitting at the same wavelength while delivering 700 fs pulses are compared. The ultrashort pulse processing is highly effective. Energy densities between 0.25 and 2 J cm⁻² result in apparent growth rates ranging from 0.017 to 0.085 nm/pulse. Ablation with nanosecond pulses of one order of magnitude higher energy densities yields smaller growth rates, the figures increase from 0.002 to 0.016 nm/pulse within the 2-14.3 J cm⁻² fluence window. 2D thickness maps derived from variable angle spectroscopic ellipsometry reveal that, when ablating with sub-ps pulses, the spot size rather than the energy density determines both the deposition rate and the angular distribution of film material. Pulse shortening leads to significant improvement in surface morphology, as well. While droplets with number densities ranging from 1 × 10⁴ to 7 × 10⁴ mm⁻² deteriorate the surface of the films deposited by the KrF excimer laser, sub-ps pulses produce practically droplet-free films. The absence of droplets has also a beneficial effect on the stoichiometry and homogeneity of the films fabricated by ultrashort pulses.     

Fabrication of material-independent morphology gradients for high-throughput applications

Gradient surfaces allow rapid, high-throughput investigations and systematic studies in many disparate fields, including biology, tribology and adhesion. We describe a novel method for the fabrication of material-independent morphology gradients, involving a two-step process of particle erosion followed by a chemical polishing procedure that preferentially removes features with a small radius of curvature as a function of time. Gradients are fabricated on aluminium surfaces, but they may be readily transferred to other materials via a replication technique, which allows for the production of identical roughness gradient samples with any chosen surface chemistry. The gradients have been characterized by means of scanning electron microscopy and optical profilometry. Standard roughness parameters (Ra, Rq, Rz, Sm and Sk) were calculated from optical profilometry data. The roughness has also been assessed over different wavelength windows by means of a fast Fourier transformation approach.     

SSIMS analysis of organics, polymer blends and interfaces

This paper gives a critical review on the applications of ToF SIMS in the areas of polymer additive characterization and in the study of polymer blends and interfaces. Polymer additives can readily be identified by ToF SIMS using their parent molecular ions or characteristic fragments. This analytical capability has been successfully applied to monitor the migration or segregation of additives during polymer processing. ToF SIMS is an ideal analytical tool for the study of polymer blends and interfaces because it is able to provide information on both surface composition and morphology. In combination with other analytical techniques such as AFM and XPS, ToF SIMS chemical imaging capability has opened up new horizons in the investigation of complex polymer blend systems. Finally the main advantages and limitations of ToF SIMS in these application areas are also discussed.     

Electron beam induced modification of poly(ethylene terephthalate) films

Electron beam processing of poly(ethylene terephthalate) (PET) films is found to promote significant changes in the melting heat, intrinsic viscosity and polymer film-liquid (water, isooctane and toluene) boundary surface tension. These properties are featured with several maximums depending on the absorbed dose and correlating with the modification of PET surface functionality. Studies using adsorption of acid-base indicators and IR-spectroscopy revealed that the increase of PET surface hydrophilicity is determined by the oxidation of methylene and methyne groups. Electron beam treatment of PET films on the surface of N-vinylpyrrolidone aqueous solution provided graft copolymerization with this comonomer at optimum process parameters (energy 700 keV, current 1 mA, absorbed dose 50 kGy).     

An effect of application of chiral aluminium alkoxides and amides as adducts to zirconium catalyzed carbo- and cycloalumination of olefins

This paper is dedicated to a study of properties of the following novel optically active organoaluminium compounds (OACs): (1S,2S)-l,7,7-trimethyl-2-[(dialkylalumina)oxy]-bicyclo[2.2.1]heptanes and (1S)-N-(dialkylalumina)-6,7-dimethoxy-1-methyl-1,2,3,4- tetrahydroisoquinolines. The synthesis of the chiral OACs was carried out in the reaction of either natural camphor or salsolidine with both AlEt₃ and i-Bu₂AlH. The main goal of the research was to investigate the stereodifferentiating activity of the chiral OACs in the olefin carbo- and cycloalumination reactions, catalyzed by Cp₂ZrCl₂.     

CuPc molecules adsorbed on Au(1 1 0)-(1 × 2): growth morphology and evolution of valence band states

We present the growth morphology, the long-range ordering, and the evolution of the valence band electronic states of ultrathin films of copper phthalocyanine (CuPc) deposited on the Au(1 1 0)-(1 × 2) reconstructed surface, as a function of the organic molecule coverage. The low energy electron diffraction patterns present a (5 × 3) reconstruction from the early adsorption stages. High-resolution UV photoelectron spectroscopy data show the disappearance of the Au surface states related to the (1 × 2) reconstruction, and the presence of new electronic features related to the molecule-substrate interaction and to the CuPc molecular states. The CuPc highest occupied molecular orbital gradually emerges in the valence band, while the interface electronic states are quenched, upon increasing the coverage.     

Novel radical‐responsive MRI contrast agent based on paramagnetic liposomes

A novel, radical responsive MRI contrast agent based on a gadolinium chelate conjugated to a liposome through a disulfide linker was synthesized, with the aim of pursuing the in vivo mapping of radicals. The liposome was prepared by incorporating a thiol‐activated phospholipid, which was subsequently reacted with a gadolinium chelate containing a free thiol group. The long reorientational motion of the supramolecular adduct endows the paramagnetic agent with a relaxivity significantly higher than that of the free complex. The disulfide bond represents a radical‐sensitive moiety and a large decrease in contrast efficacy (T₁ relaxivity) is shown upon its cleavage. A preliminary assessment of the system was made by means of in vitro gamma‐irradiation and thiol–disulfide bond exchange with dithiothreitol. Both methods showed a clear dose‐dependent decrease in T₁‐relaxivity. Copyright © 2003 John Wiley & Sons, Ltd.