Donor-Acceptor Typed AIE Luminogens with Near-infrared Emission for Super-resolution Imaging

Aggregation-induced emission(AIE)luminogens(AIEgens)with high brightness in aggregates exhibit great potentials in biological imaging,but these AIEgens are seldom applied in super-resolution biological imaging,especially in the imaging by using the structural illumination microscope(SIM).Based on this consideration,we synthesized the donor-acceptor typed AIEgen of DTPA-BTN,which not only owns high brightness in the near-infrared(NIR)emission region from 600 nm to 1000 nm(photoluminescence quantum yield,PLQYs=11.35%),but also displays excellent photo-stability.In addition,AIE nanoparticles based on 4,7-ditriphenylamine-[1,2,5]-thiadiazolo[3,4-c]pyridine(DTPA-BTN)were also prepared with highly emissive features and excellent biocompatibility.Finally,the developed DTPA-BTN-based AIE nanoparticles were applied in the super-resolution cellular imaging via SIM,where much smaller full width at half-maximum values and high signal to noise ratios were obtained,indicating the superior imaging resolution.The results here imply that highly emissive AIEgens or AIE nanoparticles can be promising imaging agents for super-resolution imaging via SIM.     

一类具有连续变量的二阶非线性阻尼差分方程的振动准则

考虑了一类具有连续变量的二阶非线性阻尼差分方程,利用积分变换和广义R iccati变换,给出了此类方程的振动准则.     

具有分支电路的半主动可控压电阻尼减振

分支电路系统中不同电器元件及其不同布置组合,可以构成不同的半主动压电阻尼系统.文中给出一种新型的半主动分支电路的可控压电阻尼技术,并以一个悬臂梁为例,对该方法的有效性进行验证.对悬臂梁处在不同模态或不同位置单个传感器的情况,通过调节可变电容,使电路的振荡频率和模态频率相吻合,从而得到振幅减少的百分比和最佳传感器位置.     

无机二元氢化物酸性的径向基函数神经网络研究

用径向基函数神经网络(RBF-Network)构建了一个无机二元氢化物酸性强度pKa与结构参数的非线性关联模型。13个样本的pKa计算值与实验值相关系数R达到0·9998,平均偏差0·315,显著优于文献报道的结果。交互预测的结果也非常理想,Rcv达到0·9984。参数试验的结果显示,以键合氢原子数m表征的构型因素和以键长rA—H等表征的分子大小因素是影响无机二元氢化物酸性强弱的主要影响因素。     

Analysis in protein profile,antioxidant activity and structure-activity relationship based on ultrasound-assisted liquid-state fermentation of soybean meal with Bacillus subtilis

This study investigated effects of ultrasound on the contents of peptide and soluble protein, antioxidant activity, functionalities and structural characteristics of fermented soybean meal (FSBM) with Bacillus subtilis systematically. The results showed that there were significant effects of ultrasound treatments (frequency, treatment time and power density) on the contents of peptide and soluble protein (p < 0.05). Under the optimum ultrasound conditions (power density of 0.08 W/mL, frequency of 33 kHz and treatment time of 1 h) by single factor experiment, the contents of peptide and soluble protein increased by 31.27% and 18.79% compared to those of the control, respectively. Additionally, the in vitro antioxidant activity (•OH scavenging rate, Fe²⁺ chelating capacity and DPPH radical scavenging rate) and functional properties (emulsifying activity and emulsifying stability) of FSBM were found to be noticeably improved by ultrasound (p < 0.05). The fourier transform infrared (FTIR) spectroscopy revealed that ultrasound caused protein molecules to unfold with a decrease content of α-helix and β-turn and an increase in the proportion of β-sheet and random coil. Besides, atomic force microscope (AFM) results indicated that ultrasonication generally increased the surface roughness of protein and the protein sonicated with higher frequency (≥33 kHz) exhibited a greater height compared to lower frequency ultrasonication. Structure-activity relationship analysis illustrated that there was a good linear relationship between •OH scavenging rate and β-sheet/β-turn with Pearson’s correlation coefficient r of −0.86/0.90. Collectively, the selection of ultrasonic parameters is essential for the preparation of functional protein and bioactive peptide by enhancing fermentation of agroindustrial by-products.     

Design of a tuned vibration absorber for a slender hollow cylindrical structure

Abstract

In this paper, details of the design work for a tuned vibration absorber to be used on a hollow cylindrical structure is presented. The vibration problem is of resonant type and the tuned vibration absorber is designed to suppress the displacement vibration response of the free end of the slender hollow structure dominated by the contribution of its lowest transverse vibration modes. The structure is modeled using a commercial finite element software. Finite element model of the structure is verified using experimentally obtained frequency response functions and modal parameters. Effective parameters of the tuned vibration absorber design are then determined based on finite element analysis simulations of the vibration suppression performance of the tuned vibration absorber as it is used on the structure. Details of the tuned vibration absorber design are determined and a prototype is fabricated. Prototype tuned vibration absorber is then characterized experimentally both as a standalone system and also as it is used on the main structure. Vibration reduction performance of the physical prototype of the tuned vibration absorber is also compared with its vibration reduction performance estimated from finite element analysis simulations so that the analysis based design process can be validated.

Communicated by Dumitru Caruntu.     

N-甲基丙烯酰-N′-嘧啶基哌嗪及其聚合物的荧光光谱研究

我们曾报道过N-丙烯酰-N′-苯基哌嗪(APP)的合成、聚合、荧光性质及其单独或与过氧化物构成氧化还原体系以引发烯类单体聚合的研究。由于APP是分子中含有给电子生色基团和缺电子双键的丙烯酸类衍生物,其荧光表现有结构自猝灭现象并且聚合物的荧光也能被其它缺电子烯类单体如丙烯腈所淬灭。对于分子中含有多个氮原子的芳杂环叔胺丙烯酸类单体的研究,文献报道较少。本文合成了新的功能性单体N-甲基丙烯酰-N′-嘧啶基哌嗪(MPMP),并观察了单体及其聚合物溶液的荧光光谱。     

铝硫二元团簇的组分及其光解规律

硫与金属元素所形成的二元团簇具有很多重要的特性,已受到人们的普遍重视.用激光-串级飞行时间质谱仪,我们曾研究了硫与过渡金属钽、铁等的二元团簇.最近我们选取主族金属元素铝,研究了铝硫团簇的形成及其光解,实验结果表明,与钽硫或铁硫团簇相比,铝硫团簇无论在其组份构成还是在其光解方面,都表现出鲜明的特有规律性.实验的主要参数如下:溅射用激光为Nd:YAG 二倍频,其输出强度控制在约10~7W·cm~(-2),激光的重复频率10Hz 样品位于激光束的焦点附近,由焦距f=50cm 的透镜调整其聚焦状     

一种刺松藻来源的硫酸阿拉伯聚糖的制备及特征结构表征

刺松藻(Codium fragile)经水提-醇沉获得粗多糖, 进一步将刺松藻粗多糖(CFP) 通过Q-Sepharose Fast Flow(QFF) 阴离子交换柱纯化得到6个多糖组分CFP1CFP6, 其中, 在CFP6中发现纯度较高的阿拉伯聚糖. 采用高效凝胶渗透色谱与十八角激光散射仪联用法和1-苯基-3-甲基-5-吡唑啉酮(PMP)柱前衍生高效液相色谱法对CFP6的分子量及单糖组成进行了分析. 结果表明, CFP6是一种分子量为79290的多糖, 由阿拉伯糖(Ara)和半乳糖(Gal)组成, 二者摩尔比为14.8:1.0. 通过多维核磁共振波谱、 液相色谱-质谱联用及二级质谱等方法对CFP6的糖苷键连接方式及其寡糖序列结构进行表征, 进一步阐明了该复杂多糖的特征结构. 经判断, CFP6主链由Ara组成, 通过 β-(1→3)糖苷键连接, 在Ara的C2位存在分支结构, 硫酸基位于Ara的C4或C2位.     

锂离子电池硅氧化物负极首次库伦效率的影响因素与提升策略

硅氧化物(SiO_x, 0<x≤2)具有高的比容量和低的嵌锂电位, 且体积膨胀率显著低于纯硅负极, 因而被认为是替代传统石墨负极材料的理想选择之一. 然而SiO_x负极在首次嵌锂过程中表面形成的固体电解质界面膜(SEI)以及大量的不可逆产物, 造成其首次库伦效率偏低, 严重阻碍了SiO_x负极的实际应用. 本文从SiO_x的结构模型出发, 系统阐述了SiO_x负极的嵌锂机理以及首次库伦效率低的原因; 归纳了SiO_x负极首次库伦效率的提升策略及其研究进展; 并对提升SiO_x负极首次库伦效率的未来发展方向进行了展望.