表面细分技术在二维声辐射和声散射中的应用

把表面细分技术应用于求解边界积分方程，既能把CAD模型直接用于边界元分析，又能精确描述复杂的边界几何形状，实现网格自动加密和形函数自动升阶，满足误差要求。把它应用于简单的二维声辐射和声散射，结果表明对提高边界元方法的计算精度是有效的。     

Scale invariance rule in electromagnetic scattering

The volume integral equation formalism is used to prove the scale invariance rule for an arbitrarily sized scatterer with an arbitrary shape, morphology, and orientation. The only assumptions are that the scatterer is made of optically isotropic linear materials and is embedded in a homogeneous, linear, isotropic, and nonabsorbing infinite medium.     

A new technique for fluid velocimetry based on near field scattering

We show that the time evolution of near-field scattering speckles, originated by a fluid suspension of particles, provides information about the velocity field in the fluid. This information can be extracted from a statistical analysis of speckle fields taken at different times, either by measuring their cross-correlation function or by recovering the power spectrum corresponding to the difference between the two speckle fields. Experimental data are in accordance to the expected behaviors. The results are independent of the scatterer's size, allowing one to exploit the technique also with sub-wavelength tracking particles.     

Modification to the Fringe Component of Diffraction Coefficient in TD-EEC Method

A modified formulation for fringe component of diffraction coefficient is implemented to TD-EEC method. An example of diffraction by perfectly conducting plate is used to illustrate our scheme. Comparing with the FDTD results we observe that the improved expression for fringe component is more accurate than that of Michaeli's formulation. This high frequency time domain technique is available for treating the bistatic scattering problems for millimeter waves.     

Courants caractéristiques et analyse de SEREigen currents and RCS analysis

In this Note, we return to the theory of characteristic modes which was introduced 30 years ago for electromagnetic scattering problems. A simple mathematical framework is proposed and complete definitions are given. The potential interest of this theory in terms of Radar Cross Section (RCS) analysis is then discussed, especially in the low frequency case. Finally, a 3-D example is presented to illustrate the efficiency of this decomposition. To cite this article: Y. Morel et al., C. R. Mecanique 332 (2004).     

10-GHz Optical Comb in L-Band Region With Brillouin/Erbium-Doped Fibre Laser

A multiwavelength Brillouin/erbium fibre laser (BEFL) which operates in the long wavelength (L-band) region is demonstrated for potential applications in an L-band wavelength division multiplexing (WDM) communication system. The laser configuration consists of a long erbium-doped fibre to enable L-band amplification where two 3-dB couplers take a portion of the generated BEFL signal and re-inject it into the single mode fibre to seed a cascaded BEFL line in the same direction as the first BEFL line. A stable and strong laser comb of up to five lines with 10-GHz spacing has been obtained with a Brillouin pump (BP) of 9.2 mW and a 980 nm pump of 92 mW. The BEFL has shown a broad tuning range with a tuning characteristic for line #1 which is flat over a range greater than 9.9 nm.     

CTAB对四-(4-N-甲基吡啶)卟啉SERS谱的影响

研究了阳离子表面活性剂十六烷基三甲基溴化铵 (CTAB)对四 ( 4 N 甲基吡啶 )卟啉 (H2 TMPyP)及其银配合物 (AgTMPyP)在Ag胶中的表面增强拉曼散射 (SERS)谱的影响 .SERS光谱表明 ,吸附于Ag胶粒的H2 TMPyP与衬底银原子结合形成AgTMPyP ,加入CTAB后 ,部分AgTMPyP表面络合物还原为H2 TMPyP .相似的去金属化反应也出现在AgTMPyP/Ag胶 /CTAB体系中 .CTAB的加入使SERS谱带强度明显增加 .AgTMPyP的去金属化被认为是由于CTAB的存在使Ag胶颗粒表面附近微环境发生改变     

布里渊区内能带E(k)=E(-k)的对称性

说明了布里渊区内能带Ｅ（ｋ）＝Ｅ（－ｋ）的对称性是时间反演对称性的结果，而与晶体的空间对称性无关．并且证明了当晶体具有中心反演对称性时，布里渊区内能带是二重简并的．     

650nm光在Intralipid-10%中分布的测量和分析

本文提出一种用光纤测定光在生物组织模型Iitralipid内部光分布的方法并测定了650nm激光在Iitralipid 10%中的分布,该方法与各向同性球形光纤探头探测组织内光分布是一种互补的方法。实验结果揭示了在生物组织模型中不同方向散射光的分布规律,表明了不同的组织光学参数和不同直径的入射光束与光分布之间的关系;采用外推边界条件的漫射方程解拟合前向散射光的测量数据确定了组织模型的散射系数和吸收系数并得到较好的结果,所测量的光学参数与公开发表的结果比较其差别在2 35%以内。     

Beam Combination using Stimulated Brillouin Scattering for the Ultimate High Power-Energy Laser System Operating at High Repetition Rate over 10 Hz for Laser Fusion Driver

After the laser was invented in 1960, a phase conjugation mirror has been respected to be the most fantastic one for the laser resonator composition because it can compensate any distortions of the laser beams occurred by the many inhomogenuities of the laser media and optical components. Among the many phase conjugation configurations, the stimulated Brillouin scattering phase conjugation mirror is the most simple one and many researchers have tried to utilize it to develop high power/energy laser systems. For realizing a high energy/power laser system the thermal problem is the most difficult to solve, and some researchers suggested a beam combination technique to reduce the thermal load of the big laser media to many small sized ones. To accomplish the beam combination using stimulated Brillouin scattering phase conjugation mirrors (SBS-PCMs), it is necessary to lock/control the phases of the SBS-PCMs. And some researchers have developed several ways for it, but they can lock the phases of a limited number of beams overlapped at the foci less than 5, or lock the phases by back-seeding technique but it loses the phase conjugation characteristics. For realization of the laser fusion driver, it is necessary to combine more than 10 or 100 beams. And the authors have developed recently a new phase controlling/locking technique which is isolated and independent totally from other beams and it can be applied to an unlimited number of beams in principle.