Cobalt‐mediated catalytic chain‐transfer polymerization (CCTP) in water and water/alcohol solution

This article describes the use of cobalt‐mediated catalytic chain transfer in aqueous solution under fed conditions for the preparation of macromonomers of acidic, hydroxy, and zwitterionic functional monomers. Use of a batch reaction leads to hydrolysis of catalyst, a mixture of mechanisms and poor control of the reaction. A feed process is described that adds catalyst as a solution in monomer over the course of the reaction. The feed process is applied to a range of monomers of methacrylic acid ( 2 ), 2‐aminoethyl methacrylate hydrochloride ( 3 ), 2‐hydroxyethyl methacrylate ( 4 ), 2‐methacryloxyethyl phosphoryl choline ( 5 ), glycerol monomethyl methacrylate ( 6 ), and 3‐O‐methacryloyl‐1,2:5,6‐di‐O‐isopropylidene‐D ‐glucofuranose ( 7 ). Use of the feed process for water‐soluble monomers in conjunction with 1 as a catalytic chain‐transfer agent gives high‐conversion, > 90%, water‐soluble macromonomers. The number‐average molecular mass (M_n was determined by integration of the ¹H NMR spectrum comparing the vinylic end group with the remainder of the backbone. Pseudo‐Mayo plots were constructed by measuring the M_n at high conversion as a function of [monomer]/[catalyst] to give observed chain‐transfer constants of 1120, 958, and 1058 for 4, 6, and 2, respectively. All products were obtained as relatively high‐solid, homogeneous, low‐viscosity aqueous solutions. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2378–2384, 2001     

Novel multifunctional polymeric materials with predominant cis microstructures derived from α‐norbornenyl macromonomer and stable macroinitiator via ring‐opening metathesis polymerization and atom transfer radical polymerization

Novel star‐like polymeric materials with high cis content could be obtained by using α‐norbornenyl macromonomers and highly stable macroinitiators derived from an active norbornene derivative [5‐(2‐bromo‐2‐methylpropionylaminomethyl)bicyclo[2.2.1]hept‐2‐ene (NBBrMPAM)], which was synthesized by the reaction of norbornene methylene amine and 2‐bromo‐2‐methylpropionyl bromide. The α‐norbornenyl macromonomer (NBPMMA), which is polymethyl methacrylate containing norbornenyl end group, was prepared by atom transfer radical polymerization (ATRP) using NBBrMPAM as an initiator. Star‐like polynorbornene with high cis microstructure (cis/trans = 72/28) was obtained directly by ring‐opening metathesis polymerization of NBPMMA macromonomer having number molecular weight (Mn ) as low as 6.39 × 10³. Random ring‐opening metathesis copolymerization of NBPMMA and norbornene derivative containing carbazole group (NBCbz) was carried out at 25 °C by using Ru catalyst [(Cy₃P)₂Cl₂Ru = CHPh, Cy = cyclohexyl, Ph = phenyl]. High cis (cis/trans = 63/37) organo‐soluble star‐like random poly(NBPMMA‐co‐NBCbz) was successfully obtained with high number‐average molecular weight (Mn ) of 4.76 × 10⁴ and molecular weight distribution polydispersity index of 1.78. Organo‐soluble comb‐shaped copolymers with MMA could be successfully obtained using ATRP macroinitiator [poly(HNBBrMPAM)] in diluted macroinitiator solution with a concentration less than 3.64 × 10^?2 mol.L^?1. This is the first ever attempt to prepare novel star‐like organo‐soluble polymeric materials with high cis microstructure via the combination of ring‐opening metathesis polymerization and ATRP. Multimodification could be considered to be carried out by using the functional bromo group at the end of side chains. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3382–3392, 2006     

High molecular weight monodisperse polystyrene microspheres prepared by dispersion polymerization,using a novel bifunctional macromonomer

A novel bifunctional vinyl‐terminated polyurethane macromonomer was applied to the dispersion polymerization of styrene in ethanol. Monodisperse polystyrene (PS) microspheres were successfully obtained above 15 wt % of macromonomer relative to styrene. The steep slope from the reduction of the average particle size reveals that the macromonomer can efficiently stabilize higher surface area of the particles when compared with a conventional stabilizer, poly(N‐vinylpyrrolidone). The stable and monodisperse PS microspheres having the weight‐average diameter of 1.2 μm and a good uniformity of 1.01 were obtained with 20 wt % polyurethane macromonomer. The grafting ratio of the PS calculated from ¹H NMR spectra linearly increased up to 0.048 with 20 wt % of the macromonomer. In addition, the high molecular weights (501,300 g/mol) of PS with increased glass transition and enhanced thermal degradation temperature were obtained. Thus, these results suggest that the bifunctional vinyl‐terminated polyurethane macromonomer acts as a reactive stabilizer, which gives polyurethane‐grafted PS with a high molecular weight. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3566–3573, 2005     

Hybrid atom transfer radical polymerization system for balanced polymerization rate and polymer molecular weight control

A hybrid polymerization system that combines the fast reaction kinetics of conventional free radical polymerization and the control of molecular weight and distribution afforded by ATRP has been developed. High‐free radical initiator concentrations in the range of 0.1–0.2 M were used in combination with a low concentration of ATRP catalyst. Conversions higher than 90% were achieved with ATRP catalyst concentrations of less than 20 ppm within 2 h for the hybrid ATRP system as compared with ATRPs where achieving such conversions would take up to 24 h. These reaction conditions lead to living polymerizations where polymer molecular weight increases linearly with monomer conversion. As in living polymerization and despite the fast rates and low ATRP catalyst concentrations, the polydispersity of the produced polymer remained below 1.30. Chain extension experiments from a synthesized macroinitiator were successful, which demonstrate the living characteristics of the hybrid ATRP process. Catalyst concentrations as low as 16 ppm were found to effectively mediate the growth of over 100 polymer chains per catalytic center, whereas at the same time negating the need for post polymerization purification given the low‐catalyst concentration. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2294–2301, 2010     

Preparation of stable micropatterns of gold oncell-adhesion-resistant hydrogels assisted by ahetero-bifunctional macromonomer linker

Surface patterning is very useful in biomaterial studies, yet it is not easy to prepare a micropattern with cell-adhesion contrast that is stable in a wet environment. Recently, a platform technique of transfer photolithography was invented to fabricate stable metal microarrays on the surface of a cell-adhesion resistant and mechanically biomimetic poly(ethylene glycol) hydrogel; the linker is the key chemical in such a transfer strategy. This article reports the design and synthesis of a hetero-bifunctional macromonomer linker with a thiol group at one end and an acryloyl group at the other end. The bifunctional linker was characterized by GPC and ¹H NMR, and the average number of thiol groups in the bifunctional linker was detected by Ellman’s reagent. The regent stability under wet conditions was also confirmed by the model reactants. The resultant micropatterned surfaces are meaningful for future studies of cell behaviors on mechanically biomimetic matrixes.     

RX/CuX/bpy催化体系中PEO大单体与PMMA接枝共聚物的合成与表征

本工作以正丁基溴为引发剂,卤化亚铜／联吡啶（bpy）为催化剂,研究了甲基丙烯酸甲酯（MMA）与末端为丙烯酰胺基的聚氧化乙烯（PEO）大单体的原子转移自由基聚合（ATRP）反应,得到了实测分子量与理论分子量相近,分子量分布较窄,有预期结构的接枝共聚物,用IR,1HNMR,VPO,GPC,DSC等进行了表征,并对共聚物的组成和分子量受单体总浓度、投料比、引发剂及反应时间的影响进行了讨论。     

含药物端基PEG大单体的合成

以烯丙醇钠为引发剂引发环氧乙烷(EO)开环聚合再与含羧基药物烟酸、布洛芬、酮洛芬、萘普生反应得到含药物端基的PEG大单体(分别记为PEG-1、PEG-2、PEG-3、PEG-4),聚合物精制后用IR,1H-NMR和GPC进行了表征,结果表明合成的四种大单体分子量分布较窄,且分子量在一定范围内可控.     

Synthesis of comb‐branched polyacrylamide with cationic poly[(2‐dimethylamino)ethyl methacrylate dimethylsulfate] quat

Comb‐branched polyelectrolytes with polyacrylamide backbones and poly[(2‐dimethylamino)ethyl methacrylate methylsulfate] (polyDMAEMA‐DMS) side chains were prepared by free‐radical macromonomer polymerization. PolyDMAEMA‐DMS macromonomers bearing terminal styrenic moieties were synthesized by living anionic polymerization with lithium 4‐vinylbenzylamide (LiVBA) and lithium N‐isopropyl‐4‐vinylbenzylamide (LiPVBA) as initiators. In the presence of LiCl, LiPVBA initiated a living polymerization of 2‐(dimethylamino)ethyl methacrylate (DMAEMA) and produced polymers with well‐controlled molecular weights and low polydispersities. LiVBA could not directly initiate DMAEMA polymerization. After being capped with two units of dimethylacrylamide, DMAEMA polymerized with an initiator efficiency of 63%. The quaternization of the poly[(2‐dimethylamino)ethyl methacrylate] macromonomer with dimethyl sulfate yielded the cationic polyDMAEMA‐DMS macromonomer. The polyDMAEMA‐DMS macromonomer had a much higher reactivity than acrylamide in free‐radical polymerization. This might have been due to the formation of polyDMAEMA‐DMS micelles in the polymerization system. The high macromonomer reactivity caused composition drift in a batch process. A semibatch method with a constant polyDMAEMA‐DMS feed rate was used to control the copolymer composition. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2394–2405, 2002     

热敏性高分子接枝聚苯乙烯微球的制备

通过使聚N－乙烯基异丁酰胺（PNVIBA）大分子单体与苯乙烯在乙醇／水的混合溶剂中进行自由基分散共聚，得到热敏性PNVIBA接枝聚苯乙烯（PNVIBA－g-PSt)高分子微球。用TEM对微球的形态进行了观察，同时考察了起始PNVIBA大分子单体浓度、苯乙烯浓度、引发剂浓度、聚合温度和混合溶剂中水对微球直径的影响。发现在较宽的聚合反应条件下，得到的接枝高分子颗粒均保持球形并具有单分散性，微球的数均直径（D）与反应条件的关系遵循：D＝K[PNVIBA]^-0.39[St]^0.80[I]^-0.14;微球直径随聚合温度的升高和混合溶剂中水含量增加而降低；颗粒形态可以通过改变聚合反应条件或添加第二小分子单体加以控制。     

Preparation of partially hydrolyzed oligo(vinylacetate) as polyol for polyurethane formation

Polyols based on oligo(vinylacetate) were synthesized using a convenient one‐pot, two‐step process. Polymerization of vinylacetate was performed in 2‐propanol as a chain‐transfer agent using di‐tert‐butylperoxide as a free‐radical initiator. Saponification of the oligomers was performed in both tetrahydrofuran and 2‐propanol using stoichiometric amounts of methanol in the presence of a basic catalyst. Well‐defined oligo(vinylacetate‐co‐vinylalcohol) polyols with a degree of polymerization below 12 and a hydroxyfunctionality smaller than 4 were obtained. Oligo(vinylacetate‐co‐vinylalcohol) was used as a polyol component in the formation of polyurethanes. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2085–2092, 2002