Solubility of α-amino acids in water under high pressure: glycine, -alanine, -valine, -leucine, and -isoleucine

The solubility of glycine, -alanine, -valine, -leucine, and -isoleucine in water was measured at 298.15 K and pressures up to 400 MPa. The standard deviation of the logarithm of the solubility is 0.001–0.003, equal to or better than the accuracy of atmospheric pressure measurement in the literature (0.001–0.05). A variety of solubility phenomena were observed. The solubility of glycine decreased with increasing pressure, whereas that of -alanine increased. The -valine and -isoleucine have a solubility maximum at around 100 MPa, and -leucine seems to exhibit a solid-phase phase transition at around 200 MPa. Pressure coefficient of the solubilities at 0.10 MPa is compared with that thermodynamically estimated in reference to aqueous density measurements of glycine and -alanine at 298.15 K and 0.10 MPa, supporting a reliability of our high-pressure measurements.     

Hydrogen substitution effect on the solubility of perhalogenated compounds in ionic liquid [bmim][PF6]

Solubility behaviors of binary mixtures of CFCl₃ (R-11), CFCl₂-CF₂Cl (R-113), CHCl₃ (R-20), CDCl₃ (R-20-d), CHCl₂–CF₃ (R-123) with room-temperature ionic liquid [bmim][PF₆] (1-butyl-3-methylimidazolium hexafluorophosphate) have been investigated using the volumetric and cloud-point methods, since all the systems show liquid–liquid equilibria (LLE). Large immiscibility (LLE) gaps of the perhalogenated compounds (R-11 and R-113) in the ionic liquid have been drastically reduced by the addition of only one hydrogen (or deuterium) in these compounds. The R-123 + [bmim][PF₆] binary system belongs to the Type-V fluid behavior. Noticeably large negative values (−2 to −8 cm³ mol⁻¹) of the excess molar volume in the ionic liquid-rich side solution have been observed for all the present systems. Experimental LLE data have been well correlated by the use of the NRTL (non-random two liquid) activity coefficient model.     

关于拉氏积分计算中的条件验证谈《微积分学教程》中的一处错误

菲赫金哥尔茨著《微积分学教程》中在计算拉普拉斯积分中称根据更序定理可施行积分次序的变更以求其值,原书未作验证。本文指出该积分不满足更序定理的条件,但在去掉积分变量t的下限O这一点后,积分就满足定理的条件了,然后通过极限步骤以求积分的值。     

Solubility and Ionic Processes in the Cu X 2? MX ?H2O ( X ?=Cl?, Br?; M +=Li+, Na+, K+, NH4+, Cs+) Systems

Summary.  Solubility isotherms in the CuBr₂−MBr−H₂O (M ⁺ = Li⁺, Na⁺, Cs⁺) systems at 298.15 K were measured. The results together with other available literature data for copper chloride and bromide systems were treated by hydration analysis, and comparative discussion of ionic processes taking place in the respective saturated solutions was performed. Corresponding author. E-mail: jitka@prfdec.natur.cuni.cz Received August 6, 2002; accepted (revised) November 29, 2002 Published online April 3, 2003     

Direct measurement of gas solubility and diffusivity in poly(vinylidene fluoride) with a high-pressure microbalance

We present solubility and diffusion data for the gases methane and carbon dioxide in the polymer poly(vinylidene fluoride). The polymer was cut from extruded piping intended for use in offshore oil and gas applications. Measurements were carried out using a purpose-built high-pressure microbalance. These properties were determined in the temperature range 80-120 °C and in the pressure range 50-150 bar for methane and 20-40 bar for carbon dioxide. In general, good agreement was obtained for similar measurements reported in the literature. Solubility follows a Henry’s law (linear) dependence with pressure. Diffusion coefficients for each of the gases in the polymer were also measured using the balance. Activation energies for diffusion and heats of solution for the two gases in the polymer were also determined.     

Solubility of gases in liquids. 18. High-precision determination of Henry fugacities for argon in liquid water at 2 to 40°C

The solubility of argon in pure liquid water was measured at ca. 100 kPa and from 2 to 40°C using an analytical method characterized by an imprecision of about ±0.05%. From the experimental results, Henry fugacities H _2,1 (T,P _s,1 ) (also known as Henry's Law constants or Henry coefficients) at the vapor pressure P _s,1 of water as well as Ostwald coefficients L _2,1 at infinite dilution were obtained. Measurements were made at roughly 0.5°C and/or 1° intervals between 2 and 8°C (region I), and at 5°C intervals above 10°C (region II). A difference plot lnH _2,1 /T suggests an unusual temperature dependence in region I, i.e., between 2 and 8°C. Because of this, the data were treated separately in two parts corresponding to these two regions. Our results are compared with the recent high-precision data of Krause and Benson (Henry fugacities), and with calorimetrically determined quantities (enthalpies and heat capacities of solution). Finally, experimental results are compared with values calculated via scaled particle theory.Communicated in part at the 2^nd International Symposium on Solubility Phenomena in Newark, New Jersey, August 12–15, 1986, and at the 4^th ISSP in Troy, New York, July 20–August 3, 1990.     

Improvement of some pharmaceutical properties of nocloprost by β- and γ-Cyclodextrin Complexation

Inclusion complexation of nocloprost, a potent antiulcer prostaglandin derivative, with -, -, and -cyclodextrins (CyDs) in aqueous solutions has been studied by the solubility method and¹³C-NMR spectroscopy. The steric requirement of host-guest interaction was reflected in the magnitude of the stability constants and the thermodynamic parameters of the inclusion complexes. Solid complexes of nocloprost with - and -CyDs in a molar ratio of 1 : 2 were obtained on the basis of aBs-type phase solubility diagram. The X-ray diffraction data suggested that nocloprost is included in the cylindrical channel formed by coaxial alignment of -CyD molecules to give a channel type structure. Release and thermal behavior of the solid complexes was examined and compared with nocloprost itself. The results indicated that the -CyD complex may have great utility among the three CyDs, being a rapid dissolving form of nocloprost with improved thermal stability.     

XPS and XAES analysis of copper,arsenic and sulfur chemical state in enargites

Enargite, a copper arsenic sulfide with the formula Cu₃AsS₄ is of environmental concern due to its potential to release toxic arsenic species. The oxidation and dissolution of enargite are governed by the composition and chemical state of the outermost surface layer. Qualitative and quantitative analysis of the enargite surface can be initially obtained on the basis of X‐ray photoelectron spectroscopy (XPS) binding energy and intensity data. However, a more precise determination of the chemical state of the principal elements of enargite (copper, arsenic and sulfur) in the altered surface layer and in the bulk of the mineral requires a combined analysis based on XPS photoelectron lines and the corresponding X‐ray excited Auger lines. On the basis of results obtained on natural and synthetic enargite samples and on standards of sulfides and oxides, the Auger parameter α′ of different compounds was calculated and the Wagner chemical state plots were drawn for arsenic, copper and sulfur. Arsenic in enargite is found to be in a chemical environment similar to that of arsenides or elemental arsenic, whereas copper in enargite is in a chemical state that corresponds to copper sulfide, Cu₂S, for all samples irrespective of surface treatment (natural or freshly cleaved). Only sulfur changed from a chemical state similar to that of copper or iron sulfide in freshly cleaved samples to another state in natural enargite in the as‐received state. Thus, it is the sulfur atom at the surface of enargite that is most susceptible to changes in the enargite surface state and composition. A more detailed interpretation of this behavior, based on differences in the initial and final state effects, is proposed here. The concept of Auger parameter and chemical state plot, used here for the first time for investigating enargite, has proved to be a method to unambiguously assign the chemical state of the principal elements copper, arsenic and sulfur in these minerals. Copyright © 2006 John Wiley & Sons, Ltd.     

On the ternary B 2-phase in the Al-Co-Ga system

Summary Lattice parameter values were determined for the ternary B 2-phase in the Al-Co-Ga system, and it was found that a continuous solid solution exists between -AlCo and -CoGa. Phase boundaries of the ternary phase at 1 100 K were derived from the variation of the lattice parameter with composition.

---

Über die ternäre B 2-Phase im System Al-Co-Ga

Zusammenfassung Im Bereich der ternären B 2-Phase im System Al-Co-Ga wurden die Werte des Gitterparameters bestimmt; es stellte sich heraus, daß eine durchgehende feste Lösung zwischen -AlCo und -CoGa besteht. Die Phasengrenzen der ternären Phase bei 1 100 K wurden aus der Änderung des Gitterparameters mit der Zusammensetzung abgeleitet.

     

Thermal decomposition kinetics of titanium hydride and Al alloy melt foaming process

Metal foams, now one of research foci, are a newclass of materials with low densities and novel physi-cal, mechanical, thermal, electrical and acoustic prop-erties[1—8]. Demands from high-tech make Al alloyfoam, which has much higher specific strength than ofpure Al foam, the new development focus[9—11]. Melt foaming process is one of the approaches tofabricate Al foam and Al alloy foam and their porestructure (pore diameter and porosity) has close rela-tionship with the thermal decompo…