Shadow-casted ultrathin surface coatings of titanium and titanium/silicon oxide sol particles via ultrasound-assisted deposition

Ultrasound-assisted deposition (USAD) of sol nanoparticles enables the formation of uniform and inherently stable thin films. However, the technique still suffers in coating hard substrates and the use of fast-reacting sol–gel precursors still remains challenging. Here, we report on the deposition of ultrathin titanium and titanium/silicon hybrid oxide coatings using hydroxylated silicon wafers as a model hard substrate. We use acetic acid as the catalyst which also suppresses the reactivity of titanium tetraisopropoxide while increasing the reactivity of tetraethyl orthosilicate through chemical modifications. Taking the advantage of this peculiar behavior, we successfully prepared titanium and titanium/silicon hybrid oxide coatings by USAD. Varying the amount of acetic acid in the reaction media, we managed to modulate thickness and surface roughness of the coatings in nanoscale. Field-emission scanning electron microscopy and atomic force microscopy studies showed the formation of conformal coatings having nanoroughness. Quantitative chemical state maps obtained by x-ray photoelectron spectroscopy (XPS) suggested the formation of ultrathin (<10 nm) coatings and thickness measurements by rotating analyzer ellipsometry supported this observation. For the first time, XPS chemical maps revealed the transport effect of ultrasonic waves since coatings were directly cast on rectangular substrates as circular shadows of the horn with clear thickness gradient from the center to the edges. In addition to the progress made in coating hard substrates, employing fast-reacting precursors and achieving hybrid coatings; this report provides the first visual evidence on previously suggested “acceleration and smashing” mechanism as the main driving force of USAD.     

Multiferroicity in La1/2Nd1/2FeO3 nanoparticles

Nano-sized La_1/2Nd_1/2FeO₃ (LNF) powder is synthesized by the sol–gel citrate method. The Rietveld refinement of the X-ray diffraction profile of the sample at room temperature (303 K) shows the orthorhombic phase with Pbnm symmetry. The particle size is obtained by transmission electron microscope. The antiferromagnetic nature of the sample is explained using zero field cooled and field cooled magnetisation and the corresponding hysteresis loop. A signature of weak ferromagnetic phase is observed in LNF at low temperature which is explained on the basis of spin glass like behaviour of surface spins. The dielectric relaxation of the sample has been investigated using impedance spectroscopy in the frequency range from 42 Hz to 1 MHz and in the temperature range from 303 K to 513 K. The Cole–Cole model is used to analyse the dielectric relaxation of LNF. The frequency dependent conductivity spectra follow the power law. The magneto capacitance measurement of the sample confirms its multiferroic behaviour.     

Structural,optical and photocatalytic properties of (Mg,Al)-codoped ZnO powders prepared by sol–gel method

Structural and optical properties of 1 at % Al-doped Zn_1−xMg_xO (x=0–8%) powders prepared by sol–gel method were systematically investigated by means of X-ray diffraction, scanning electron microscopy, ultraviolet–visible absorbance measurement, photoluminescence and Raman scattering spectra. All the powders retained the hexagonal wurtzite structure of ZnO. The band gap and near band emission energies determined from absorbance and photoluminescence spectra increased linearly with increasing Mg content, respectively, which implied that the Mg worked effectively on ZnO band gap engineering, irrespective of Al codoping. However, according to the PL and Raman scattering studies, for the sample of x=8%, the Al doping efficiency was decreased by higher Mg codoping. On the other hand, the effect of Mg codoping on photocatalytic degradation of methylene orange was explored experimentally. The substitution of Mg ions at Zn sites shifted the conduction band toward higher energies and then enhanced the photocatalytic activity, while the incorporation of interstitial Mg ions and decreased Al doping efficiency for higher Mg doping sample (x=8%) reduced the photocatalytic activity.     

Various shaped-ZnO nanocrystals via low temperature synthetic methods: Surfactant and pH dependence

ZnO nanocrystals, rod-, carnation-, and flower-like structures, have been synthesized in a high yield through low-temperature synthetic methods. Well-aligned ZnO nanorods having hexagonal wurtzite structure were grown on the ZnO thin films assembled by a spin-coating method. The morphologies of ZnO seed films are affected by pHs of sol–gel solutions, resulting smaller sizes and homogeneous roughness at higher pHs and higher number of spin-coating times. The carnation-like structures, average size of about 2–3 μm, were assembled by tens of uniform ZnO nanosheet petals of ∼50 nm in thickness when a different volume ratio of the precursory solution was used. ZnO nanocrystals on the facets of the compact ZnO nanorods have grown to linear nanorods having an average diameter of ∼500 nm and length of ∼2 μm. Furthermore, a noticeable difference in the growth of ZnO nanocrystals in the presence of various surfactants, polyvinylpyrrolidone, polyvinylsulphonic acid, and polyethyleneimine, has been observed and discussed.     

TiO2 Thin Film with Varied Porous Structure Applied on the Degradation of Methylene Blue

In this study, porous TiO₂ thin films were prepared by the sol‐gel method employing polyethylene glycol 1000 (PEG 1000) as an organic template. Pore sizes were adjusted by varying the concentration of PEG 1000. The optimal PEG concentration range required to form TiO₂ films with a regular porous structure was investigated and was found to be 0.01–0.015 M. As the PEG 1000 concentration increased, the surface of these films became rougher because of larger pores. Degradation of methylene blue (MB) under UV irradiation was used to determine the photocatalytic activity of the films. In addition, the effect of the pH value of the MB solution on the films was evaluated by controlling its pH value at 5, 7, and 9. The results showed that the photocatalytic activity was correlated to the pore size and pore density of the thin films. TiO2 thin films possessing pore sizes in the diameter range of 35–85 nm exhibited the best conversion of 98% after 8 h of UV irradiation when the pH value was 7.     

Comparison of BOD optical fiber biosensors based on different microorganisms immobilized in ormosil matrixes

Fiber-optical microbial sensors for determination of biochemical oxygen demand (BOD) are described. Sensing films consisting of layers of an oxygen-sensitive fluorescent material and two different kinds of seawater microorganisms immobilized in poly(vinyl alcohol) sol–gel matrix were investigated. Tris(4,7-diphenyl-1,10-phenanthroline)ruthenium(II) perchlorate was used as the oxygen fluorescent quenching indicator. After preconditioning, the BOD biosensors could consistently perform well for up to one month. For films of domestic bacilli and films of sieved bacteria from seawater, the linear fluctuant coefficients (R ²) in the range of 4–200?mg/L were 0.9975 and 0.9783 when a glucose/glutamate BOD standard was applied. The relative error of standard deviations for the two microorganism-immobilized BOD sensing films were within 4%?and 2%?of the mean value, respectively. The effects of temperature, pH and sodium chloride concentration on the two microbial films were also studied. For low biochemical oxygen demand, a film of sieved bacteria from seawater had superior sensitivity and is expected to be developed further.     

Pure CuCr2O4 nanoparticles: Synthesis,characterization and their morphological and size effects on the catalytic thermal decomposition of ammonium perchlorate

In the present paper a pure phase of the copper chromite spinel nanoparticles (CuCr₂O₄ SNPs) were synthesized via the sol–gel route using citric acid as a complexing agent. Then, the CuCr₂O₄ SNPs has been characterized by field emission scanning electron microscope (FE-SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD). In the next step, with the addition of Cu–Cr–O nanoparticles (NPs), the effects of different parameters such as Cu–Cr–O particle size and the Cu/Cr molar ratios on the thermal behavior of Cu–Cr–O NPs + AP (ammonium perchlorate) mixtures were investigated. As such, the catalytic effect of the Cu–Cr–O NPs for thermal decomposition of AP was evaluated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). TGA/DSC results showed that the samples with different morphologies exhibited different catalytic activity in different stages of thermal decomposition of AP. Also, in the presence of Cu–Cr–O nanocatalysts, all of the exothermic peaks of AP shifted to a lower temperature, indicating the thermal decomposition of AP was enhanced. Moreover, the heat released (ΔH) in the presence of Cu–Cr–O nanocatalysts was increased to 1490 J g⁻¹.     

Synthesis and electrochemical characteristics of xLi2MnO3–(1−x)Li(Mn0.375Ni0.375Co0.25)O2 (0.0 ≤ x ≤ 1.0) thin film cathode for lithium rechargeable micro batteries

We have compared the structure, microstructure, and electrochemical characteristics of xLi₂MnO₃–(1−x)Li(Mn_0.375Ni_0.375Co_0.25)O₂ (0.0 ≤ x ≤ 1.0) thin films with their bulk cathode laminate counterparts of identical compositions. Pure Li(Mn_0.375Ni_0.375Co_0.25)O₂ as well as the synthesized composite films partially transform into cubic spinel structure during charge–discharge cycling. In contrast, such layered to spinel phase transformation has only been identified in bulk cathode laminates with x ≥ 0.75. At a current density 0.05 mAcm⁻², the discharge capacity of Li(Mn_0.375Ni_0.375Co_0.25)O₂ thin film was measured to be ∼60 μAhcm⁻². The discharge capacity (∼217 μAhcm⁻²) was markedly improved in x∼0.5 composite thin film. The capacity retention after 20 charge discharge cycles are improved in composite films; however, their capacity fading could not be eliminated completely.     

Application of sol–gel TiO2 film for an extended-gate H+ ion-sensitive field-effect transistor

In this study, a sol–gel TiO₂ thin film has been spin-coated on a commercial ITO glass substrate as the extended-gate field effect transistor (EGFET) for hydrogen ion sensing. The as-deposited films are further annealed at various temperatures (T_a) under ambient atmosphere. It is found that the bi-layer structure of TiO₂/ITO EGFET exhibits good linear sensitivity from pH 1 to 11. Anatase TiO₂ appeared as early as T_a = 200 °C and a brookite (121) diffraction evolved at T_a = 500 °C. No prominent influence on the surface fine structures could be found at higher T_a. Due to the reduction or disappearance of the surface hydroxyl groups on TiO₂, the sensitivities of the TiO₂/ITO pH-EGFET device are rapidly reduced. However, the influence of the conductivity decay for ITO substrates annealed at high T_a could not be excluded. A maximum sensitivity 61.44 mV/pH is achieved as T_a = 300 °C.The bi-layer structure of TiO₂/ITO exhibits better long-term stability than the traditional ITO sensing membranes. In addition, the asymmetric hysteresis is more significant in alkaline buffer solutions, which could be explained by a site-binding model because the diffusion of H⁺ ions into the buried sites of the sensing film is more rapid than that of OH⁻ ions.