Ab initio potential energy surface and excited vibrational states for the electronic ground state of Li_2H

A 285-pomt multi-reference configuration-interaction involving single and double excitations ( MRS DCI) potential energy surface for the electronic ground state of L12H is determined by using 6-311G (2df,2pd)basis set.A Simons-Parr-Finlan polynomial expansion is used to fit the discrete surface with a x2 of 4.64×106 The equn librium geometry occurs at Rc=0.172 nm and,LiHL1=94.10°.The dissociation energy for reaction I2H(2A)→L12(1∑g)+H(2S) is 243.910 kJ/mol,and that for reaction L12H(2A')→HL1(1∑) + L1(2S) is 106.445 kl/mol The inversion barrier height is 50.388 kj/mol.The vibrational energy levels are calculated using the discrete variable representation (DVR) method.     

混合高序铜法立体选择性合成（±）—EpilitsenolideC2

混合高序铜法立体选择性合成（±）┐ＥｐｉｌｉｔｓｅｎｏｌｉｄｅＣ２陈祖兴李焰＊黄精美黄锦霞徐章煌（湖北大学化学系武汉４３００６２）关键词烷叉基二氢羟基甲基（３Ｈ）呋喃酮，混合高序铜，立体选择性反应１９９６－０８－２８收稿，１９９７－０５－０６修回湖北...     

Crystal structure of dicyclohexano-18-crown-6 potassium 2-nitrophenoxide

The first crystal structure of a potassium cation complex with dicyclohexano-18-crown-6 is reported. The potassium 2-nitrophenoxide complex ofsyn-cis-syn dicyclohexano-18-crown-6 crystallizes in the triclinic space group P with cell constantsa=8.604(2),b=10.772(4),C=16.123(5)Å, =73.86(3)°,=77.61(3)°, =82.68(3)° andZ=2 forD _c =1.31 g cm^–3. Least-squares refinement based on 2742 observed reflections led to a final conventionalR value of 0.040. Dicyclohexano-18-crown-6 has the shape of a saddle with the potassium cation sitting at the saddlepoint. The structure of the 2-nitrophenoxide anion is dominanted by the quinoid resonance contributor. Because the complex is devoid of significant intercomplex interactions, it is a prototypical 1:1:1 complex. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82043 (26 pages).Now Mrs. K. M. Balo.     

Theoretical studies on the conformation of saccharides

Conformations of 2-methoxytetrahydropyran as a model for the six-membered ring in aldopyranosides have been calculated by the PCILO method using the algorithm of the conjugated gradient to optimize the geometry. The calculated geometry of the fourteen basic forms of 2-methoxytetrahydropyran was found to be in agreement with the available data obtained by X-ray diffraction of pyranosides. The results indicate differences in the geometry of 2-methoxytetrahydropyran resulting from the change of the axial vs. equatorial position of the methoxyl group. These changes are particularly meaningful in the values of bond angles and they are in agreement with the anomeric and exoanomeric effects. The experimentally found differences in the energies of an axial (⁴ C ₁) and equatorial (¹ C ₄) conformer, G = 2.9–3.7 kJ/mol, and the dipole moment, = 1.20 ± 0.05 D (1D = 3.33 10^–30mAs) agree well with the calculated values E = 3.18 kJ/mol and <> = 1.18 D which, in turn, suggest that the axial conformer is preferred over the equatorial one by a ratio a:e = 78:22.     

Mg改性对Co/γ-Al2O3-TiO2催化燃烧丙烷性能影响

采用分步浸渍法制备了系列Mg改性的Co/γ-Al_2O_3-TiO_2催化剂,通过X射线衍射(XRD)、紫外可见漫反射光谱(DR-UV-vis)、N_2吸附-脱附(BET)、X射线光电子能谱(XPS)和H_2程序升温还原(H_2-TPR)等技术对催化剂进行表征,并考察了其对丙烷燃烧的催化性能。结果表明,Co在原始γ-Al_2O_3-TiO_2载体和Mg改性MgO/γ-Al_2O_3-TiO_2载体上均以Co_3O_4的形式存在;Mg掺入后与Al_2O_3作用形成MgAl_2O_4尖晶石,改善了载体的织构性质,提升了Co_3O_4在催化剂载体表面的暴露数量和分散程度。此外,MgAl_2O_4与Co_3O_4相互作用提升了Co_3O_4颗粒表面Co~(3+)/Co~(2+)和O_(ads)/O_(latt)的比例,并削弱了Co-O键键能,从而提升了其对丙烷的催化燃烧活性。当Mg负载量为15%(质量分数)时,在Co/MgO(15%)/γ-Al_2O_3-TiO_2催化剂上进行丙烷燃烧,丙烷90%转化率的温度比无Mg掺杂的Co/γ-Al_2O_3-TiO_2催化剂的降低了45℃,并且连续反应40 h其活性保持稳定。     

1,3,2—氧氮磷杂环戊烷衍生物晶体结构研究

用X射线衍射方法测定了两个1,3,2-氧氮磷杂环戊烷衍生物的晶体结构:2-二乙氨基-3-(4′-甲基苯甲酰基)-2-硫代-1,3,2-氧氮磷杂环戊烷,C_(14)H_(21)N_2O_2PS(1),空间群为P_(bco),α=0.9057(5)nm,b=1.3974(6)nm,c=2.5130(7)nm,Z=8,R=0.051;2-二乙氨基-3-(2′,4′-二氯苯甲酰基)-2-硫代-1,3,2-氧氮磷杂环戊烷,C_(13)H_(17)N_2O_2PSCl_2(2),空间群P2_1/c,α=0.7375(1)nm,b=1.4370(3)nm,c=1.6015(7)nm,β=93.70(2)°,Z=4,R=0.054。结构均由直接法解出。两个化合物中氧氮磷杂五元环均为半椅式构象。其中P—N键长环内分别为0.1712(2)nm和0.1723(0)nn;环外为0.1620(3)nm和0.1620(0)nm,由于成环作用所致环内P—N键长大于环外的。     

簇合物[Fe（DMF）6][W2S6]的合成,结构和性能研究

以(NH_4)_2WS_4、FeCl_3和NaS_2CNC_5H_(10)为原料,合成出[Fe(DMF)_6][W_2S_6]簇合物,用X射线衍射法测定了晶胞结构.其晶胞参数为a=0.8778(1)nm,b=0.9467(3)nm,c=1.1362(6)nm,α=71.506(1)°,β=74.775(2)°,γ=74.775(2)°,ν=0.84806nm~3,Z=1.晶体结构经块矩阵最小二乘法精修后,最终偏离因子R=0.0811.此外还进行了红外光谱、紫外可见光谱的测定.     

桥联双β-环糊精对N-[4-(1-芘基)]丁酰-D/L-苯丙氨酸的手性识别及机理研究

利用紫外-可见吸收和荧光发射光谱, 结合非线性最小二乘法拟合曲线以及分子力学(MM2)模拟系统地研究了手性分子N-[4-(1-芘基)]丁酰-D/L-苯丙氨酸(PDP和PLP, 总称PPs)与β-环糊精(β-CD)、 2-位硒桥联双β-CD(2-SeCD)和2-位碲桥联双β-CD(2-TeCD)的包结能力大小及这3个环糊精对PPs手性识别能力的差异和识别机理. 研究结果表明, PPs不能与单疏水空腔的β-CD形成很好的包结复合物, 与具有较长桥联链的2-TeCD结合能力最强. 2-TeCD与PDP和PLP的结合常数分别为2.33×104和6.07×103 L/mol, 对PPs的手性识别比达到KD/KL=3.84, 高于2-SeCD(KD/KL=2.61). 用MM2模拟得出了PPs与这两个双环糊精形成复合物的三维结构: PPs的绝大部分位于双环糊精两个空腔之间, 但是在这两个复合物中, 苯环与芘环所成的二面角不同. 此外, PPs与这两个双环糊精作用时均存在明显的氢键相互作用, 且2-TeCD强于2-SeCD.     

2-取代吡啶半菁染料的无溶剂微波合成及光谱性质的理论研究

在微波促进无溶剂条件下, 由N-甲基-2-甲基吡啶碘盐与取代芳香醛在哌啶作用下合成了一系列2-取代的吡啶半菁染料, 产物结构由元素分析, ¹H NMR, MS, IR, UV得到确认. 该方法操作简便, 收率高. 在此基础上, 对N-甲 基-2-(p-N,N-二甲氨基-苯乙烯基)吡啶半菁染料的光谱性质进行了理论计算.     

Intermediates in the transformation of 1,2-dialkylpyrimidinium iodides in the Kost-Sagitullin rearrangement

Intermediate recyclization products were obtained in a study of the Kost-Sagitullin rearrangement of a series of 1,2-dialkylpyrimidinium iodides. The initial attack of the nucleophile leads to the formation of products of the addition of the hydroxyl group, namely, the corresponding pseudo bases. Heating one of these intermediates in ethanol or in the presence of primary amines leads to rearrangement to give a pyridone derivative. Upon heating in chloroform, the pseudo bases readily lose a water molecule and are converted to anhydro bases, namely, derivatives of 1-alkyl-1,2-dihydro-2-methylidenepyrimidine. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 894–900, May, 2006.