酵母蛋白质网络的动力学性质

蛋白质-蛋白质、蛋白质-DNA相互作用网络决定了细胞中各种关键功能的执行．基于芽殖酵母(budding yeast saccharomyces cerevisiae)的蛋白质-蛋白质相互作用网络数据和相关的实验文献，我们建立了调控细胞周期和生命周期(cell cycle and life cycle)的蛋白质网络，并利用离散模型研究了该网络的动力学性质，研究表明：细胞周期网络的动力学性质具有很强的稳定性，约94％的蛋白质初态将演化到对应于生物学G1基态的稳定态，使其成为惟一的全局吸引点；同时，绝大多数的初态的演化路径都通过由G1激发态到G1基态的细胞周期演化路径，使细胞周期路径成为全局性的“吸引”路径。     

Investigation of the Li1+xV3O8 electrode–organic electrolyte interface by scanning photoelectron microscopy

To investigate the formation of a solid electrolyte interface (SEI) on the Li_1+xV₃O₈ electrode surface in the thermodynamic stability range of the organic electrolyte, we applied scanning photoelectron microscopy (SPEM) to a pristine electrode and to an electrode after ten cycles. The F K-edge absorption spectrum of the cycled electrode showed that LiF forms on the electrode surface during the lithium insertion–extraction process in the Li_1+xV₃O₈/Li cell. The photoelectron spectrum for the cycled electrode showed intense spectral features corresponding to Li 1s, F 2s, F 2p, and P 2p electron signals, whereas these spectral features were of negligible intensity for the pristine electrode. The above results give strong support for the formation of an SEI that consists of LiF and compounds containing phosphorus during operation of the battery. The SPEM images also revealed that the fluorine distribution on the surface of the cycled electrode was inhomogeneous.     

Duffing-van der Pol振子随机分岔的全局分析

应用广义胞映射方法研究了参激和外激共同作用的Duffing-van der Pol振子的随机分岔.以 系统参数通过某一临界值时，如果系统的随机吸引子或随机鞍的形态发生突然变化，则认为 系统发生随机分岔为定义，分析了参激强度和外激强度的变化对于随机分岔的影响.揭示了 随机分岔的发生主要是由于系统的随机吸引子与系统的随机鞍碰撞产生的.分析表明，广义 胞映射方法是分析随机分岔的有力工具，这种全局分析方法可以清晰地给出随机分岔的发生 和发展. 关键词： 随机分岔 全局分析 广义胞映射方法 随机吸引子 随机鞍     

干电池供电式电子标准电池的设计

标准电池是度量电源电动势的标准仪器．利用RC4191和MC1403精密的低压稳压特性，设计一款电子稳压式的标准电池，既可克服传统汞镉标准电池的缺点，又能保证相同精度的实验性能要求．     

铝电解过程控制信号的滤波与噪声解析模型的研究

将快速傅里叶变换技术和数字滤波器设计技术应用于铝电解过程控制信号的滤波与噪声解析模型中,在160kA中间点式下料预焙槽上的试验结果表明了模型的有效性。     

微量元素对葡萄叶细胞超微结构的影响

对缺乏锌、硼、钼、锰、铜等微量元素的葡萄叶细胞进行观察表明:细胞核结构异常,叶绿体外被膜不完整,片层膜系统模糊不清,较则排列杂乱,重则趋于瓦解、消失,基质中出现了数量不等的液泡.     

SXDG-1型汽车前照灯全自动检测仪的微机控制

SXDG—1型汽车前照灯全自动检测仪是用于检测汽车前照大灯光轴的偏斜情况及发光强度并进行定量检验的专用设备。它可以自动测出有关参数,并予以数字显示和打印输出。本文介绍了该仪器的主要性能、工作原理及微机控制系统(包括硬件结构和软件设计思想等)。     

X-ray metrology for advanced silicon processes

X-ray reflectivity (XRR), X-ray fluorescence (XRF) and small angle X-ray scattering (SAXS) techniques are used to the monitoring of Cu/porous low κ processes, which are developed for the next generation (≤65 nm) integrated circuits. Sensitivity of XRR and XRF is sufficient to detect drifts of the copper barrier layer, copper seed layer and Cu CMP (chemical-mechanical polishing) processes. Their metrology key parameters comply with production requirements. SAXS allows determining the pore structure of low κ films: average pore size and pore size distribution.     

Hydrothermal synthesis of FeS2 for lithium batteries

Nanocrystalline FeS₂ cathode material of lithium cell was synthesized from cheap materials of FeSO₄, Na₂S₂O₃, and sulfur by a hydrothermal process. The scanning electron microscopy analysis showed the obtained material was nano-sized, about 500 nm. The X-ray powder diffraction analysis showed that the synthetic FeS₂ material had two phases of the crystalline structure, pyrite and marcasite. The phase of marcasite seems to have no negative effect on the electrochemical performance of the material. The synthetic FeS₂ showed a significant improvement of electrochemical performance for Li/FeS₂ cells.     

乳液聚合阶段Ⅱ动力学研究的进展

本文简述了乳浓聚合动力学研究的进展,着重于澳大利亚Sydney大学Gilbert等在乳液聚合阶段Ⅱ动力学方面的研究概况。介绍了不同水溶性单体的小尺寸种子乳液体系的SmithEwart递推方程的求解方法及其解析解形式和乳液聚合动力学数据的处理。同时讨论了该研究的局限性。