成像系统中Wollaston棱镜的光学性能

给出了Wollaston棱镜的透射比及位相延迟与入射角的关系,就Wo11aston棱镜用于成像系统中的性能进行了研究。     

多光谱全色分色棱镜的胶合

论述了多光谱全色分色棱镜组的胶合工艺。该棱镜组是由６块非标准角棱镜、１块底板和４块滤色镜共１１个零件所组成。该棱镜组各出射面与入射面之间的角度允差要求≤１０″，各通光面与底板底面之间的垂直度要求⊥≤１０″，棱镜中间还有两处空气隙，空气隙的宽度要求为Ｌ＝０．０５ｍｍ。另外，各棱镜在主光路方向上还有距离（光程）要求，因此该棱镜组的胶合工作成了该项任务加工中一个比较关键的技术。     

Sensitivity dependence of surface plasmon resonance based sensors on prism refractive index

We theoretically and experimentally demonstrate that refractive index of the prism used to load metal film has significant influence on sensitivity of surface plasmon resonance based sensors. The prism with lower refractive index gives the sensors a higher sensitivity in detecting refractive index variations of a sample. We attribute this effect to the fact that a prism with low refractive index will increase coupling distance between surface plasmons and the medium under investigation. Foundation item: Supported by Wuhan University and National Education Ministry of China Biography: Wang Guo-ping (1964-), male, Professor, research direction: bolographic materials, diffractive optical elements, optical properties of metallic nanopracticles and metal-dielectric nanostructures     

Computation of the Reflection Coefficient of a Triangular Semiconductor Prism in a Rectangular Waveguide

In this paper we present a method to solve Maxwell's equations that enables to compute waveguide structure containing a semiconductor triangular prism. The numerical study has showed that the triangular prism in the waveguide has a wider frequency band in comparison with a square rod under equal conditions. The reflection coefficient dependencies on frequency, prism size and its permittivity have been computed. The algorithm and computer programme have been tested and compared with the numerical results and experimental data of the paper [1] with good agreement.     

光强连续可调的圆偏振光衰减器

利用1/4波片及偏光棱镜,设计了光强连续可调的圆偏振光衰减器,通过该器件可获得偏振度高且光强连续可调的圆偏振光.该衰减器解决了632.8 nm多膜氦氖激光器出射光为非完全自然光且偏振面随时间做随机变化导致实验误差的问题,为偏光信息测试系统提供了相对稳定的激光光源.     

Angular interferometer using calcite prism and rotating analyzer

An interferometer using a calcite prism and rotating analyzer is proposed for angular displacement determinations. The calcite prism senses the angular displacements and the rotating analyzer transfers the interference signals from dc-type into ac-type. Compact optical setup and using low-cost devices are thus the advantages of the interferometer. The theory of the interferometer is first demonstrated. A setup constructed to realize the interferometer and the results of using this setup are then presented.     

双棱镜干涉实验中的参量取值研究

本文从理论上推导出双棱镜干涉实验中各参量的取值范围,并通过实验研究找到测量误差小于1%时各参量的取值,这为减小实验误差提供了理论和实验依据.     

Prism‐hamiltonicity of triangulations

The prism over a graph G is the Cartesian product G □ K₂ of G with the complete graph K₂. If the prism over G is hamiltonian, we say that G is prism‐hamiltonian. We prove that triangulations of the plane, projective plane, torus, and Klein bottle are prism‐hamiltonian. We additionally show that every 4‐connected triangulation of a surface with sufficiently large representativity is prism‐hamiltonian, and that every 3‐connected planar bipartite graph is prism‐hamiltonian. © 2007 Wiley Periodicals, Inc. J Graph Theory 57: 181–197, 2008     

Performance evaluation of a wave-front displacement system for vectorial shearing interferometer

We describe a wave-front displacement system using a novel configuration of a pair of wedge prisms. The wave-front propagation, through the displacement system, is analyzed using the exact ray trace. The main advantage, of this configuration, is that the shearing (direction and magnitude) is constant from the displacement system to the image plane. The direction of the shearing depends on the relative orientation of the prisms. The magnitude of the shearing is proportional to the distance between prisms. The proportionality constant depends on the wedge angle and the material of fabrication of the prisms, and it gives the sensitivity to the displacement of the system. The deviation of the shearing due to the difference between the wedge angles is larger than that the produced by the oblique incidence of the wave-front. The experimental results confirm the theoretical data.     

Vibration and dissipative heating of a layered rectangular viscoelastic prism under harmonic shear loading

The vibration and vibrational heating of a rectangular prism with copper and polyethylene layers is studied by solving numerically a coupled problem of thermoelasticity. The cases of kinematic and mechanical harmonic shear loads on a section of the prism surface are examined. Local heating regions are revealed. They are due to the stress fields in the neighborhood of the points at which the type of boundary conditions changes. The temperature–time curves have preresonance, resonant, and postresonance sections. The heating process reaches a steady thermal state under kinematic loading and may become avalanche-like (which is typical of thermal instability) under mechanical loading Translated from Prikladnaya Mekhanika, Vol. 45, No. 2, pp. 70–78, February 2009.