High lithiophilic nitrogen-doped carbon nanotube arrays prepared by in-situ catalyze for lithium metal anode

Lithium metal has a very outstanding theoretical capacity(3860 mAh/g) and is one of the most superior anode materials for high energy density batteries.However,the uncontrollable dendrite growth and the fo rmation of "dead lithium" are the important hidden dangers of short cycle life and low safety.However,the uncontrollable dendrite growth and the fo rmation of dead lithium leads to short cycle life and hidden dange r,which hinder its practical application.Controlling the nucleation and growth process of lithium is an effective strategy to inhibit lithium dendrite.Herein,a simple in situ self-catalytic method is used to construct nitrogen doped carbon nanotube arrays on stainless steel mesh(N-CNT@SS) as a lithium composite anode.The N-doped CNTs provide a great number of N-functional groups,which enhance the lithiophilic of anode and provide a large number of uniform nucleation sites,hence it has excellent structural stability for cycles.The arrays provide neat lithium-ion transport channels to uniform lithiumion flux and inhibits dendrite generation,revealed by the COMSOL multi-physics concentration field simulation.The N-CNT@SS composite anode sustain stable at 98.9% over 300 cycles at 1 mA/cm2.NCNT@SS as the anode is coupled LiFePO_4(LFP) as the cathode construct a full battery,demonstrating excellent cycling stability with a capacity of 152.33 mAh/g and capacity retaining ratio of 95.4% after 100 cycles at 0.5 C.     

Effect of ruptured cavitated bubble cluster on the extent of the cell deformation by ultrasound

In this paper, the bubble-cell model is presented. The effects of the spacing between the bubble population and the cell, the radius of the bubble and the bubble medium on the degree of cell deformation were investigated by solving the Helmholtz equation and the equilibrium of motion equation using COMSOL Multiphysis@ software. The ultrasonic transducer is applied in a round bottom flask with the bubble-cell model on the side of the ultrasonic transducer. When the distance between the bubble cluster and the cell gradually increases, the extent of deformation of the cell is reflected as first increasing and then decreasing, reaching the maximum deformation at D = 2. When the radius of the bubble is changed, there is a “constant frequency” at low frequency ultrasound in any distance case, at which the cell deformation will be violent. However, when the bubble medium is changed, there is no significant change in the degree of deformation of the cells. In other words, changes in the structure of the bubble-cell model affect the degree of cell deformation, but without structural changes, the degree of cell deformation changes very little.     

印刷线路板分压离子阱的离子单向出射性能研究

印刷线路板(Printed-Circuit-Board,PCB)分压离子阱是一种新型质量分析器,其突出优点在于内部电场可通过调节射频分压比进行优化.本实验在PCB分压离子阱离子出射方向的两组离散电极上配置了非对称的射频分压,以引入奇次阶场成分,使得射频电场的场中心(即离子运动中心)发生偏移,从而实现离子单向出射.通过数值计算软件SIMION和AXSIM分析了射频分压比差值与其内部电场分布的关系,并模拟离子运动轨迹,得到离子出射情况和模拟质谱峰.模拟结果表明,当两组离散电极的射频分压比差值为20％时,在合适的AC频率条件下,对于m/z=609 Th的离子,PCB分压离子阱的离子单向出射率可达90％以上,且质量分辨率大于2500.本研究可使PCB分压离子阱在基本不损失质量分辨率和使用单检测器模式下,大幅提高离子检测效率,因而在小型化质谱仪应用中具有显著优势.     

An improved sequential extraction method to determine element mobility in pyrite-bearing siliciclastic rocks

A sequential extraction method was developed for pyrite-bearing (FeS₂) siliciclastic rocks. The focus of this study was to enhance the procedure by an improved oxidation step to completely dissolve not only organic matter but also microcrystalline pyrite. In the first experiment, four oxidation procedures were compared for pure pyrite at extraction temperatures of 25°C and 85°C with hydrogen peroxide (H₂O₂) as the main oxidant. It was found that pyrite dissolution was most effective by using a mixture of H₂O₂, ammonium acetate (NH₄OAc) and nitric acid (HNO₃) at 25°C. This procedure dissolved >90% pyrite, and detected >75% using solute iron measurements. The difference between these two results was explained by reprecipitation of secondary iron minerals. The procedure worked best at 25°C, since solvent evaporation at 85°C amplified iron oversaturation and precipitation. For the pyrite-bearing siliciclastic rocks, two sequential extraction schemes were compared to optimise solid–solvent ratio, extraction step order and type of solvent. Eventually, the most effective step order identified for siliciclastic rocks containing pyrite and little organic matter was to first (1) remove the exchangeable fraction, followed by (2) dissolution with acid and afterwards (3) with a reducing agent. The (4) oxidation step was performed last.     

A two-unit general parallel system with (n − 2) cold standbys—Analytic and simulation approach

A parallel (2, n − 2)-system is investigated here where two units start their operation simultaneously and any one of them is replaced instantaneously upon its failure by one of the (n − 2) cold standbys. We assume availability of n non-identical, non-repairable units for replacement or support. The system reliability is evaluated by recursive relations with unit-lifetimes T_i (i = 1, … , n) that have a general joint distribution function F(t). On the basis of the derived expression, simulation techniques have been developed for the evaluation of the system reliability and the mean time to failure, useful when dealing with large systems or correlated unit-lifetimes and less mathematically manageable distributions. Simulation results are presented for various lifetime distributions and comparisons are made with derived analytic results for some special distributions and moderate values of n.     

含软弱夹层对巷道围岩承载结构的影响分析

为研究软弱夹层对巷道围岩承载结构和稳定性的影响,采用相似材料模拟和理论分析相结合的方法,通过三种不同方案对比分析了不同支承结构下含软弱夹层巷道围岩受力与变形情况,揭示了含软弱夹层巷道围岩稳定控制机理,并通过现场实测进行验证。结果表明:①巷道顶板和帮部破坏程度明显大于肩部;②采用方案三联合支护能够有效提高巷道围岩应力和承载力;③联合支护方案能够使软弱夹层与上、下硬岩层之间协同耦合承载,减少巷道围岩变形。     

Micro solid phase spectrophotometry in a sequential injection lab-on-valve platform for cadmium,zinc, and copper determination in freshwaters

This work describes the development of a solid phase spectrophotometry method in a μSI-LOV system for cadmium, zinc, and copper determination in freshwaters. NTA (Nitrilotriacetic acid) beads with 60–160 μm diameter were packed in the flow cell of the LOV for a μSPE column of 1 cm length. The spectrophotometric determination is based on the colourimetric reaction between dithizone and the target metals, previously retained on NTA resin. The absorbance of the coloured product formed is measured, at 550 nm, on the surface of the NTA resin beads in a solid phase spectrophotometry approach.     

Ancestral population genomics using coalescence hidden Markov models and heuristic optimisation algorithms

With full genome data from several closely related species now readily available, we have the ultimate data for demographic inference. Exploiting these full genomes, however, requires models that can explicitly model recombination along alignments of full chromosomal length. Over the last decade a class of models, based on the sequential Markov coalescence model combined with hidden Markov models, has been developed and used to make inference in simple demographic scenarios. To move forward to more complex demographic modelling we need better and more automated ways of specifying these models and efficient optimisation algorithms for inferring the parameters in complex and often high-dimensional models.In this paper we present a framework for building such coalescence hidden Markov models for pairwise alignments and present results for using heuristic optimisation algorithms for parameter estimation. We show that we can build more complex demographic models than our previous frameworks and that we obtain more accurate parameter estimates using heuristic optimisation algorithms than when using our previous gradient based approaches.Our new framework provides a flexible way of constructing coalescence hidden Markov models almost automatically. While estimating parameters in more complex models is still challenging we show that using heuristic optimisation algorithms we still get a fairly good accuracy.     

中空多壳层结构材料的制备及气体传感应用研究进展

先进气体传感器技术在现代社会安全生产生活中扮演着极为重要的角色, 而高效敏感材料的设计与开发是其中的关键. 中空多壳层结构材料因其独特的层层嵌套的多壳层与多腔体结构而表现出特别的物理化学性质, 在气体传感领域显现出巨大的应用潜力. 传统的硬模板法、 软模板法以及基于奥斯特瓦尔德熟化和柯肯德尔效应的无模板法在中空多壳层纳米结构材料的普适制备及壳层结构的精确调控等方面存在诸多限制. 次序模板法的出现突破了上述限制, 促进了该领域的迅速发展. 本文简要回顾了中空多壳层结构材料制备方法的发展历程, 介绍了其在甲醛、 乙醇、 丙酮、 甲苯及二氧化氮等有害气体检测中的具体应用, 分析了其在气体传感领域的独特优势, 最后对该领域面临的挑战和发展前景进行了总结与展望.