味觉电化学传感器的研究——Ⅰ.甜、酸、苦、咸物质对模拟生物膜电位振动频率的影响

本文以十六烷基三甲基溴化铵/含苦味酸的硝基苯/蔗糖溶液为研究体系,发现甜、酸、苦、咸物质均能使体系的振动波形和频率发生变化,初步建立了测定有味物质的定性、定量方法,并对该味觉电化学传感器的响应机理进行了探讨。     

Simultaneous Determination of 1,4‐Benzodiazepines and Tricyclic Antidepressants in Saliva after Sequential SPE Elution by the Same HPLC Conditions

A new method has been described to determine both benzodiazepines (six) and tricyclic antidepressants (four) simultaneously in saliva by HPLC with a UV detector set at 240 nm using cholchicine as the internal standard. A careful specific sequential solid‐phase elution was optimized and performed to elute benzodiazepines using a mixture of methanol‐acetonitrile (1:1 v/v) followed by the elution of tricyclic antidepressants with methanol. Separation of the compounds was performed on a Kromasil column (250 × 4 mm, 5 μm) by a gradient eluents consisting of 0.05 M CH₃COONH₄‐acetonitrile‐methanol (55:15:30 v/v/v). The results were linear for both benzodiazepines and tricyclic antidepressants up to 20 ng μL^‐1 with the correlation coefficients greater than 0.998. The sensitivity limits, LOD and LOQ were 0.08‐0.34 ng μL^‐1 and 0.28‐1.13 ng μL^‐1, respectively. The method is simple, fast and reliable with good specificity and sensitivity, will be suitable for use in a clinical setting, where there is a concomitant use of 1,4‐benzodiazepines and tricyclic antidepressants.     

Enzyme based assays in a sequential injection format: a review

Sequential injection analysis systems have been extensively exploited in the last decades for the implementation of enzyme based assays aiming the evaluation of enzyme activity or the determination of specific analytes. The most prominent aspects of the automation of enzymatic assays in these systems are discussed in this review. Special attention is devoted to the mode of enzyme manipulation in homogeneous or heterogeneous media and to the comparison with batch and flow injection enzyme methodologies. The possibility of implementing strategies for the enhancement of selectivity in specific determinations is also addressed. The more recent trends in this field are discussed focusing mainly on the miniaturization resorting to the lab-on valve platform as well as on the bead injection concept.     

流体熵相关性质的Monte Carlo模拟新方法

提出了用于计算实际体系熵相关性质的Monte Carlo多级取样分子模拟方法. 应用这一方法, 对硬球流体的化学势及Helmholtz自由能进行了估算, 得到了满意的结果. 计算化学势时, 不存在通常试验粒子方法所遇到的高密度问题. 该方法特别适合规律性的系统研究, 较之普通模拟方法要有效得多. 模拟得到的硬球体系无限稀释组份的超额化学势与对比直径的关系, 在相变区域为一条双凹曲线; 无论是在相变区还是在单相区, Carnahan-Starling公式对这一关系的描述均有较大偏差.     

基于顺序注射分析法的丝网印刷型生物传感器系统的研究

采用顺序注射分析(SIA)与丝网印刷生物传感器联用法,考察辣根过氧化物酶(HRP)催化邻苯二胺(OPD)-H<,2>O<,2>反应体系.利用牛血清白蛋白(BSA)和戊二醛形成的交联大分子,将HRP固定于丝网印刷电极表面,制备成 HRP 电极,通过对缓冲液pH值及浓度、泵流速、样品量进行优化,建立用于检测HRP对H<,2...     

Pressure-assisted capillary electrophoresis for cation separations using a sequential injection analysis manifold and contactless conductivity detection

Pressure assisted capillary electrophoresis in capillaries with internal diameters of 10 μm was found possible without significant penalty in terms of separation efficiency and sensitivity when using contactless conductivity detection. A sequential injection analysis manifold consisting of a syringe pump and valves was used to impose a hydrodynamic flow in the separation of some inorganic as well as organic cations. It is demonstrated that the approach may be used to optimize analysis time by superimposing a hydrodynamic flow parallel to the electrokinetic motion. It is also possible to improve the separation by using the forced flow to maintain the analytes in the capillary, and thus the separation field, for longer times. The use of the syringe pump allows flexible and precise control of the pressure, so that it is possible to impose pressure steps during the separation. The use of this was demonstrated for the speeding up of late peaks, or forcing repeated passage of the sample plug through the capillary in order to increase separation.     

Contactless conductivity detector array for capillary electrophoresis

A CE system featuring an array of 16 contactless conductivity detectors was constructed. The detectors were arranged along 70 cm length of a capillary with 100 cm total length and allow the monitoring of separation processes. As the detectors cannot be accommodated on a conventional commercial instrument, a purpose built set‐up employing a sequential injection manifold had to be employed for automation of the fluid handling. Conductivity measurements can be considered universal for electrophoresis and thus any changes in ionic composition can be monitored. The progress of the separation of Na⁺ and K⁺ is demonstrated. The potential of the system to the study of processes in CZE is shown in two examples. The first demonstrates the differences in the developments of peaks originating from a sample plug with a purely aqueous background to that of a plug containing the analyte ions in the buffer. The second example visualizes the opposite migration of cations and anions from a sample plug that had been placed in the middle of the capillary.     

Sequential Ugi Four‐Component Reaction (4‐CR)/CH Activation Using (Diacetoxyiodo)benzene for the Synthesis of 3‐(Diphenylmethylidene)‐2,3‐dihydro‐1H‐indol‐2‐ones

A sequential Ugi four‐component reaction (4‐CR)/C? H activation using (diacetoxyiodo)benzene is reported. This process is a five‐component reaction of aromatic aldehydes, aniline derivatives, isocyanides, phenylpropiolic acid (3‐phenylprop‐2‐ynoic acid), and (diacetoxyiodo)benzene for the synthesis of 3‐(diphenylmethylidene)‐2,3‐dihydro‐1H‐indol‐2‐ones. This procedure offers several advantages such as good yields, high bond‐forming efficiency, selectivity, and short reaction times.     

DSC study and computer modelling of the melting process in ice slurry

In order to understand the non-isothermal melting kinetics in the ice slurry, a differential scanning calorimetry (DSC) was used. Experimental results were compared to those obtained by a numerical simulation in which a general enthalpy method was applied. In this work the ice slurry studied consists of ice particles uniformly dispersed within a water-antifreeze liquid mixture. The effects of the heating rate and the initial antifreeze mass fraction are discussed. It has been found that the temperature gradients inside the sample of the solution become important if either heating rate increases or initial antifreeze mass fraction decreases.     

On-line liquid phase micro-extraction based on drop-in-plug sequential injection lab-at-valve platform for metal determination

A novel automatic on-line liquid phase micro-extraction method based on drop-in-plug sequential injection lab-at-valve (LAV) platform was proposed for metal preconcentration and determination. A flow-through micro-extraction chamber mounted at the selection valve was adopted without the need of sophisticated lab-on-valve components. Coupled to flame atomic absorption spectrometry (FAAS), the potential of this lab-at-valve scheme is demonstrated for trace lead determination in environmental and biological water samples. A hydrophobic complex of lead with ammonium pyrrolidine dithiocarbamate (APDC) was formed on-line and subsequently extracted into an 80 μL plug of chloroform. The extraction procedure was performed by forming micro-droplets of aqueous phase into the plug of the extractant. All critical parameters that affect the efficiency of the system were studied and optimized. The proposed method offered good performance characteristics and high preconcentration ratios. For 10 mL sample consumption an enhancement factor of 125 was obtained. The detection limit was 1.8 μg L⁻¹ and the precision expressed as relative standard deviation (RSD) at 50.0 μg L⁻¹ of lead was 2.9%. The proposed method was evaluated by analyzing certified reference materials and applied for lead determination in natural waters and urine samples.