Interaction of a screw dislocation with a notch in a piezoelectric bi-material

Summary The electro-elastic interaction of a screw dislocation and a notch in a piezoelectric bi-material is analyzed. The electro-elastic fields induced by the dislocation are derived using the conformal mapping and the image-dislocation approach, where the solution for a piezoelectric bi-material without a notch is used as a base. The stress and the electric displacement intensity factors of the notch and the image force on the dislocation are given explicitly. We find that intensity factors are expressed in terms of the effective material constants, while the radial component of the image force is independent of the notch angle and the angular position of the dislocation in the polar coordinate system. Numerical results for the image force are provided for the use when one of the two media is purely elastic. They illustrate the behavior of the dislocation in the neighborhood of the notch.     

Optimization of erbium-doped fiber MOPA laser

An erbium-doped fiber laser (EDFL) constructed in a master oscillator and power amplifier (MOPA) configuration is analyzed. The pump powers for the fiber cavity laser and the booster amplifier stages are managed properly to achieve maximal pump conversion efficiency. Our design achieves a pump conversion efficiency of 91.4%, corresponding to a quantum efficiency of 96.6%, for a 1565.8 nm MOPA laser pumped by a total power of 300 mW at 1480 nm. The optimized MOPA laser shows a 25% enhancement in the pump conversion efficiency, compared to a non-MOPA fiber laser. A side lobe suppression ratio of 48 dB for the optimized MOPA laser is observed.     

Controllable growth and characterizations of hybrid spiral-like atomically thin molybdenum disulfide

Monolayer MoS₂ is an emerging two-dimensional semiconductor with wide-ranging potential applications in novel electronic and optoelectronic devices. Here, we reported controlled vapor phase growth of hybrid spiral-like MoS₂ crystals investigated by multiple means of X-Ray photoemission spectroscopy, scanning electron microscopy, atomic force microscopy, kelvin probe force microscopy, Raman and Photoluminescence techniques. Morphological characterizations reveal an intriguing hybrid spiral-like MoS₂ feature whose lower planes are AB Bernal stacking and upper structure is spiral. We ascribe the hybrid spiral-like structure to a screw dislocation drive growth mechanism owing to lower supersaturation and layer-by-layer growth mode. In addition, the electrostatic properties of MoS₂ microflakes with hybrid spiral structures are obvious inhomogeneous and dependent on morphology manifested by kelvin probe force microscopy. Our work deepens the understanding of growth mechanisms of CVD-grown MoS₂, which is also adoptable to other TMDC materials.     

Fiber-optic reflex sensor for in-line production measurement

The paper describes experiments concerning distance measurement with fiber-optic sensor and improvement of the measurement principle. The sensor probe was well-designed with a small structure and multi-function. The novel optical fiber probe arrangement as well as the possibilities of use for complex measurement problems are explained using the measurement of an internal screw thread as an example. The experimental results show that the measurement uncertainty of the thread minor diameter can reach ±10 μm, and the stability of the measurement system is better than 0.07%.     

单螺杆油气混输泵螺杆-衬套副结构参数的优选

对影响单螺杆油气混输泵螺杆-衬套副的性能和寿命的各种因素(如过流面积、密封腔的压力变化规律、相对滑动速度、螺杆转动惯性力、压缩比等)及其随结构参数的变化规律进行了全面的理论分析。通过对单项指标的分析,结合现有单螺杆油气混输泵的设计和安装必须满足的结构条件,推荐了综合考虑多项指标时结构参数的优选方法,得到了结构参数的优选图解。所得的结果对单螺杆油气混输泵的设计具有一定意义。     

离合器式螺旋压力机惯性控制器的仿真与试验研究

本文对离合器式螺旋压力机的关键部分——离合器惯性快速脱开装置进行了理论分析和试验研究,设计制造了一台惯性控制器模拟装置,并对其作了数字仿真和大量测试.证明了此种控制器的可靠性;确定了脱开时间与各种参数,如主螺杆角加速度、惯性块转动惯量等的关系和控制气压对脱开时刻的调节作用,为惯性控制器的实用设计提供了理论基础和依据.     

单螺杆泵输送不同粘度液体时的外特性及汽蚀特征

本文用不同粘度的液体对单螺杆泵的外特性和汽蚀特性进行了实验研究,分析了外特性曲线的变化特点,讨论了粘度变化对特性和能量分配的影响,并对单螺杆泵的汽蚀特性曲线和汽蚀条件下的能量平衡关系进行了初步的分析和探讨。     

大型泵站前池非定常平面流态模拟

推导了N-S方程的混合有限分析法格式及其一些性质应用交错网格法,进行数值模拟上海市合流污水治理二期工程南线A号污水泵站前池的非定食平面流场．模拟结果与实测数据有较好的吻合