Ion-exchange selectivity and chromatographic separation of trivalent metals on titanium antimonate

Summary The ion exchange selectivity of trivalent metal ions has been determined on titanium antimonate cation exchanger prepared by coprecipitation of antimony to titanium at different mole ratios. The selectivity sequence Al³⁺<Cr³⁺<Ga³⁺<In³⁺<Fe³⁺ was found for trivalent metal ions at an initial concentration of 10^–4 mol dm^–3 in nitric acid media. A high separation factor ^Ga/Al = Kd^Ga/Kd^Al, 4.8×10³, was observed for the Ga³⁺–Al³⁺ pair on titanium antimonate with an antimony to titanium ratio of 0.34. The effective separation of Ga³⁺ and In³⁺ from Al³⁺ was achieved using a 3 cm×0.5 cm i.d. column containing titanium antimonate with an antimony to titanium ratio of 0.34.     

Modification of silica gel with diethylamino group by novel reaction and its characterization

1,3,5,7-Tetramethylcyclotetrasiloxane (H₄) was deposited on silica gel at 80°C by utilizing a chemical vapor deposition (CVD) method, where it was catalytically polymerized to form a surface coating of polymethylsiloxane (PMS). Treated silica gel (PMS-Si) increased in weight up to a plateau level, and there was no further increase with increasing reaction time. The film of PMS was partially cross linked; typical values of crosslinking ratio and film thickness were 2% and 0.6 nm, respectively. An anionic ion exchanger containing diethylamino groups was synthesized from PMS-Si by hydrosilylation of allyl glycidyl ether followed by treatment with diethylamine. Its structure was confirmed by¹³C and²⁹Si CP/MAS NMR spectroscopy and FT-IR spectrophotometry. Characterization of silica gel (DEA-Si) modified with diethylamino group was evaluated by a packing of the column for liquid chromatography. As a mixture of five nucleotides was completely separated, it was recognized that DEA-Si was operated by ion exchange action. Because the surface of the silica gel was covered with hydrophobic PMS, the peak heights and retention times did not change after washing of the column with alkaline solution.     

凹坑板式空气预热器的传热特性及多目标优化

以全焊接型凹坑板式空气预热器为对象,基于最优设计试验方案,运用Workbench Fluent软件数值模拟凹坑板片特征结构参数对传热流阻性能的影响。基于参数敏感度分析,得到单因素作用下对传热流阻性能的影响程度为凹坑的纵向间距>长轴>横向间距>深度。基于响应曲面法分析,得到多因素协同作用时,凹坑之间的结构参数横纵距对性能影响比凹坑自身的结构参数深径比大。基于遗传算法以摩擦因子f最小、努塞尔数Nu与综合换热因子J_F最大为优化目标,得到给定范围内的3组较优结构组合。     

一种实用的小程控交换机供电电源

作者介绍了一种“ＣＵＫ”电路来实现的小型程控交换机供电电源,简述了此电源的基本模型,给出了实际设计的方法,并列出了实例测数据,还在电源的可靠性方面进行了探讨,本文阐明了采用“ＣＵＫ”电路来实现的开关稳压电源具有体积小、重量轻、效率高等特点,展示出利用“ＣＵＫ”电路实现的开关稳压电源具有广泛的前景。     

脱色阴离子交换剂的再生研究

提出一种新的离子交换剂再生理论，即吸附物的脱附依靠离子交换和络合的协同效应完成．以二价钙离子为再生剂，对糖液脱色用的阴离子交换树脂和阴离子交换纤维进行再生，并与传统的碱性钠盐相比较，研究证明钙离子为再生剂的工艺，具有低成本、无污染的特点．     

Contribution of dimensional factor to the potential of copper-containing electron-ion exchangers

The average size of copper particles in copper-containing electron-ion exchangers is determined with the aid of microscopy and x-ray diffractometry. The results are used to calculate the contribution made by a dimensional factor to the electrode potential. Compared to the potential of compact copper, the potential shift in the negative direction measured experimentally falls within the region of calculated values. The average size of copper particles remains practically unchanged after contact with a copper sulfate solution, testifying to stabilization of an ultradisperse state of copper particles by a polymer matrix.     

Analytical study of highly condensed non ionic surfactants. Separation on cation exchangers

Summary This study was aimed at optimizing the separation of non-ionic surfactants, resulting from the condensation of ethylene oxide with natural fatty alcohols in the C₁₆ and C₁₈ range (saturated and unsaturated), and presenting a high degree of condensation, i.e. 20 and 25 ethylene oxide units (Brij 99 and KM 25). The cation exchange stationary phase is a partially ionized silica, conditioned in different ways. We have studied the influence of the nature of cations on the separation selectivity. Cations studied included alkali metals (Li⁺, Na⁺, K⁺, Rb⁺, Cs⁺), alkaline earth metals (Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺), transition metals (Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺, Cu²⁺), and quaternary ammonium (NH ₄ ⁺ , NMe ₄ ⁺ ) ions as well as a proton (acetic acid). The influences of ionic strength, pH and addition of cosolvent were examined. A study of the influence of temperature on the system selectivity evidenced a strong interdependance of these two parameters. The optimized conditions [mobile phase: CH₃CN/H₂O (92/8), pH 7.4, sodium acetate 5.10^–3 M; temperature gradient between 25 and 50°C] allowed for the first time the distributions of Brij 99 and KM 25 to be obtained.     

分布式数据库数据访问原理及仿真

针对分布式程控交换机内部的关系型数据库，以阿尔卡特的全分散控制交换机为对象，研究了数据访问原理及数据库对各种关系的访问过程。对分布式程控交换机的数据库结构作了深层分析，讨论了数据访问模型，用宏指令编程完成了数据访问仿真系统设计，并给出了仿真模型的确定方法。通过对实关系的访问过程分析，说明了该方法的可行性，并推导出当进行大批量数据访问时，该方法可提高数据修改和查询效率。经在交换机上运行，结果稳定可靠。     

卧式换热器换热管束对壳体的加强作用

卧式换热器的换热管束对壳体起着加强作用，其加强作用的程度与换热管束的材料、管子根数、截面积及布管情况有关，通过理论计算和分析，如适当考虑换热管的加强作用，将使管壳式换热器的设计更合理、更经济。     

7号信令系统定时服务器设计

在电信领域，尤其在７号信令系统应用中，定时器有决定性的重要影响．以ＴＵＰ为对象，剖析７号信令系统定时特点，分析定时服务器的服务对象和设计需求．基于ＵＮＩＸ和ＶＭＥｅｘｅｃ实时操作系统平台，扩展了标准的ＵＮＩＸ定时服务，提供了一个实时、高分辨率定时处理机制，并从设计方案、实现算法及性能等方面进行了讨论