Microwave-assisted sol-gel synthesis of CeO2–NiO nanocomposite based NO2 gas sensor for selective detection at lower operating temperature

The progress in the development of gas sensors has considerably grown using some novel nanomaterials of metal, metal oxide and composite. In the current study, we intended and evaluated the properties of nanomaterials like CeO₂, NiO, and CeO₂–NiO composite and its application as NO₂ gas sensor. Sensing of low concentration of NO₂ gas at optimum functional temperature was succeeded using CeO₂–NiO nanocomposites (NCs) film. The working temperature ranges in between 100 and 225 ?°C. Highly crystalline nanomaterials (CeO₂, NiO and CeO₂–NiO) have been prepared by applying microwave-assisted sol-gel route. The as-prepared nanomaterials are characterized for their structure, size, morphology and constitution by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray analysis. XRD studies of nanoparticles reveal the formation of nanoscale CeO₂ and NiO with crystallite size 26, 23 ?nm, respectively. Both are having a face centered cubic structure. The nanocomposite (NC) Ce:Ni ?= ?60:40 has crystallite size of 13 ?nm. XRD study of NCs shows assimilation of Ni metal into the ceria and proves physical similarities of two phases. It can be observed from SEM that prepared NC has a porous surface which enables more surface active sites for adsorbing oxygen. The optical properties are measured with the help of UV–Vis. Spectroscopy. Optical band gaps of 3.19, 3.41 and 2.9 ?eV were observed for CeO_2, NiO nanoparticles (NPs) and CeO₂–NiO NC, respectively. Gas sensing properties state that the NC material shows a higher gas response % of 67.34% for NO₂ gas (25 ?ppm) at comparatively low operating temperature (125 ?°C). It gives response time as (～28 ?s) and the recovery (～54 ?s). NiO incorporation in CeO₂ results in a decline of operating temperature of NC and improves the sensing features.     

Choline chloride – Urea deep eutectic solvent an efficient media for the preparation of metal nanoparticles

Metal nanoparticles are nanosized structures that have different potential applications in biological, chemical, medical, and agricultural fields because of their exotic characteristics. Their size ranges from 1 to 100 nm. Metal nanoparticles are either purer forms of metals (eg: Gold, Silver, Copper, Iron, etc.) or their compounds (eg: sulfides, hydroxides, oxides, etc.). Ionic liquids are generally used in the extraction of nanoparticles but they are challenging because of their indigent bio-degradability, bio-compatibility, and sustainability. So Deep Eutectic Solvent (DES) is reported as an alternative to ionic liquids in the formation of nanoparticles. The DESs are a complex of quaternary ammonium salts and hydrogen donors or metal salt. DESs contain higher non-symmetric ions which have lower lattice energy and hence they have a lower melting point. This research utilizes a novel DES (choline chloride – urea) as an effective solvent to produce mercuric sulfide (HgS), zirconium oxide (ZrO), manganese oxide (MnO), and copper oxide (CuO) nanoparticles. As a result, the production of these metal nanoparticles using Choline Chloride (C₅H₁₄ClNO) – Urea DES can be treated as a promising way in chemical manufacturing. The nanoparticles have been analyzed using Ultra Violet Spectroscopy, Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Fourier Transform Infrared Spectroscopy (FT-IR), X-Ray Diffraction (XRD) and Energy Dispersive X-Ray Analysis (EDAX).     

The development of platinum-rhodium alloy coatings on SS304 using a pulse/direct electrodeposition technique and their application to antibacterial activity

The current research focused on the development of Platinum–Rhodium alloy coating (Pt– Rh) on SS304 and its applications in antibacterial studies. Electrodeposition is considered to be one of the most suitable methods because it enhances the therapeutic effects of noble metals (Pt–Rh alloy). The electrodeposited coating is an economical and time-saving alternative to existing coating methods. The newly developed Pt–Rh coating was investigated using a scanning electron microscope (SEM) and an atomic force microscope (AFM). Using the agar Petri plate and broth culture method, the antibacterial effect of the platinum-rhodium alloy was investigated against Gram-negative Escherichia coli and Gram-positive bacteria such as Staphylococcus saprophytes, Bacillus Subtilis, and Enterococcus faecalis. The Pt–Rh alloy coated samples obtained by Direct current (DC) and Pulse coating (PC 50% and PC 75%) were examined for antibacterial study. The PC 75% Pt–Rh alloy coating exhibits significant antibacterial activity, demonstrating a maximum zone of inhibition while leaving the rest of the coated samples by DC and PC 50% duty cycles. The study also found that when the concentration of Pt–Rh solution rises from 5 μL to 15 μL, so does the antibacterial activity. The findings of the study showed that electrodeposited platinum-rhodium alloy metal ions may be handy bacteriostatic in the coming years.     

Nelumbo nucifera leaves as source of water-repellent wax: Extraction through polar and non-polar organic solvents

Nelumbo nucifera leaves are rich source of natural wax possessing super-hydrophobic properties. It provides protection to them from ecological turbulences and climatic wear and tear. In this study, various experiments have been conducted to observe the yield of extraction and the determination of various functional groups, which are present in natural wax, derived from Nelumbo nucifera leaves. The natural wax has been extracted from lotus leaves through non-polar (hexane) and polar (ethanol) solvent via different extraction methods. The superhydrophobic wax has been successfully extracted with hexane. Whereas, ethanol did not extract the water-repellent wax of lotus leaf. Considering the cumulative amount, i.e. (desired + undesired), the maceration shows the extraction of 2.9% (%w/w, through hexane) and 10.2% (%w/w, through ethanol), while it was found 2.5% (%w/w, cycle period 15 min) and 9.0% (%w/w, cycle period 26 min) respectively, in case of Soxhlet extraction technique. For this specific case of natural wax recovery from biomass (lotus leaf), the maceration (traditional method) resulted a little bit superior extraction yield in comparison to the Soxhlet extraction method for extraction of crude wax. In the case of non-polar solvent (hexane), an extraction yield of 1.97% (%w/w) through maceration method was observed while in the case of non-polar solvent (ethanol), an extraction yield of 1.62% (%w/w) through Soxhlet extraction was observed. The TLC analysis on both types of extracts was performed. For the detection of various hydrocarbon chains in the crude wax extracts, FTIR was also performed. Topography of wax surface and wax-coated waterproof fabric was compared through SEM.     

A sol-gel route for the development of rare-earth aluminum borate nanopowders and transparent thin films

A new sol-gel route was applied to obtain Y_0.9Er_0.1Al₃(BO₃)₄ crystalline powders and amorphous thin films by using Al(acac)₃, B(OPrⁱ)₃, Y(NO₃)₃·6H₂O, and Er(NO₃)₃·5H₂O as starting materials dissolved in propionic acid and ethyl alcohol mixtures. Our study shows that propionic acid acts as good chelant agent for yttrium and erbium ions while ethyl alcohol allows to dissolve Al(acac)₃. This process makes the resulting sols very stable to obtain homogeneous gels and transparent amorphous thin films. In addition, the propionic acid prevents the sol precipitation, making easy porous- and crack-free thin film depositions. Chemical reactions involved in the complexation were discussed. As-prepared powders and films are amorphous and present a good thermal stability due to their high glass transition (746 °C) and crystallization temperatures (830 °C). This new sol-gel route showed to be adequate to obtain dense and crack-free thin films free of organic and hydroxyl groups that can be considered as promising materials to be used in integrated optical systems.     

三门峡虢季墓遗址盐害分析与调查

针对三门峡虢季墓遗址部分区域存在起甲、泛白、疱疹等由可溶盐引起的病害,在其遗址不同部位取样进行土遗址本体含盐分析.取样区域包括虢季墓、梁姬墓和近代墓遗址.采用X射线荧光光谱(XRF)和离子色谱(IC)分析所取样品的可溶盐成分、含量及可溶盐成盐元素在土遗址中的成盐规律.采用电子能谱(XPS)和X射线衍射(XRD)分析样品的物相组成及盐分状态,扫描电子显微镜/能谱(SEM/EDS)进一步考察含盐土质的颗粒组成、微观形貌等.结果表明:虢季墓取样区域所含盐分主要为Na_2SO_4、CaCO_3和少量的其他盐分如CaCl_2、KNO_3和NaCl等.靠近地面部位所取样品盐分含量高于其他部位,盐害表现更为明显.梁姬墓取样区域总盐分含量略高于虢季墓与近代墓,硝酸盐含量较高.而近代墓遗址可溶盐盐分含量略低,盐害不明显.在不同取样点可溶盐含量有所差异,但在邻近区域,其成盐具有一定规律性,这一点对于遗址基体中盐害的深入研究与防治具有重要意义.     

COPOLYMERS OF 2-ACRYLAMIDO-2-METHYL-1-PROPANESULFONIC ACID/MALEIC ACID： SYNTHESIS, CHARACTERIZATION AND ANTIMICROBIAL ACTIVITY

2-Acrylamido-2-methy1-1-propanesulfonic acid(AMPS),and maleic acid(MA)copolymerized with different feed ratios using N,N-dimethylformamide as a solvent and benzoyl peroxide(Bz_2O_2)as an initiator at 70℃.Structure and composition of copolymers for a wide range of monomer feed were determined by elemental analysis(content of N for AMPS-units).Monomer reactivity ratios for AMPS(M_1)-MA(M_2)pair were determined by the application of conventional linearization methods such as Fineman-Ross(F-R),Kelen-Tüd(?)s(KT)and Extended Kelen-Tüds(EKT)and a nonlinear error invariable model method using a computer program RREVM.The characterizations were done by Fourier transform infrared spectroscopy(FTIR),differential scanning calorimetry(DSC)thermal gravimetry analysis(TGA),and and X-ray diffraction.The antimicrobial effects of polymers were also tested on various bacteria,and yeast.     

SEM–EDX and SAM–AES Investigations on Rochow Contact Masses

Appropriate Rochow contact masses have been investigated by the spatial resolution techniques SEM–EDX and SAM–AES. The results gave evidence of the existence and the catalytic action of (X-ray)-amorphous copper–silicon (Cu–Si) surface species, i.e. extremely highly dispersed particles or two-dimensional species. The well-known Rochow promoter zinc seems to act as a moderator rather than as a real accelerator. It ensures a stable rate for the reaction by neutralizing the detrimental action of silicon impurities. The silicon impurities make the whole of the silicon surface reactive and in this way cause a general blockade of the silicon surface by inactive copper species. Zinc localizes the reaction. The silicon surface remains partly free, and active Cu–Si surface species can be formed by lateral diffusion of copper onto the silicon surface that is still free. © 1997 by John Wiley & Sons, Ltd.     

The thermal decomposition of NaHCO3

New EGA findings revealed that the small endothermal event preceding that of the main decomposition of commercial NaHCO₃ involves the simultaneous evolution of water and CO₂. At very high sensitivity, EGA experiments evidenced that the above (limited) evolution of gases also took place from the recrystallized material for which thermal methods gave no indication of endotherms.Careful reexamination of previous DSC results indicated that for one kind of recrystallized material a very small endotherm had been neglected. Renewed experiments revealed that this endotherm can be enhanced if the samples are prepared by crushing and sieving in a wet atmosphere. Parallel FT-IR experiments on commercial and recrystallized materials demonstrated the presence of carbonate in samples that had previously been taken just beyond the first small endotherm; this confirmed the EGA results. SEM experiments showed that surface texture changes take place when samples are heated to temperatures just above that of the preliminary endotherm. On the basis of these new findings, the interpretation previously given to the small endotherm is revised and detailed knowledge is gained on the mechanism of decomposition of NaHCO₃.The authors express their gratitude to Dr. Stephen B. Warrington (Thermal Analysis Consultancy Service, Leeds Metropolitan University) for having communicated the EGA results that led to the present report. The authors also feel indebted to Dr. Mario Paolieri of the Centro Interdipartimentale per la Microscopia Elettronica e la Microanalisi (M.E.M.A.) for his help in performing and interpreting the SEM experiments, and to Mr. Paolo Parri for his careful preparation of the illustrative material. Financial support from the University of Florence (ex 60% MURST) is greatly appreciated.     

Graphene-modified Monolithic Capillary Column for the Microextraction of Trace Benzodiazepines in Biological Samples

A graphene monolithic column was fabricated in a capillary using π-electron-rich poly(N-vinylcarbazole-divinylbenzene) as the supporter through in situ one-step polymerization for the enrichment of trace benzodiazepines in biological samples. This new three-dimensional monolith showed uniformity and a continuous column bed; more importantly, it retained the unique properties of graphene that are typically associated with individual graphene sheets. Based on the large delocalized π-electron system, graphene forms π–π stacking interactions with benzodiazepines and benzene rings of poly(N-vinylcarbazole-divinylbenzene), which not only enhance the extraction performance for benzodiazepines compared to the neat polymer but also provide chemical stability of the graphene monolith. Moreover, several factors likely to affect the extraction, including ionic strength, sample pH, sample volume, and eluant volume were studied in detail. The optimized method gave a linear range of 0.005–1?ng?mL^?1, and detection limits of 1.12–2.35?ng?L^?1. Finally, the graphene monolith was successfully applied to the separation and enrichment of benzodiazepines from urine and hair samples coupled with high-performance liquid chromatography–mass spectrometry. The recoveries were in the range of 78.6–85.6% for urine and 87.2–94.3% for hair with relative standard deviations of 3.4–6.9 and 2.9–8.3%, respectively.