Complexation of metal ions with the novel azathia crown ethers carrying anthracene pendant in acetonitrile–dichloromethane

A series of crown ethers carrying an anthracene group with nitrogen–sulfur donor atom, which differ in having three, four and five sulfur atoms in the macrocycle was designed and synthesized by the reaction of the corresponding macrocyclic compound and 9-chloromethyl-anthracene. The influence of metal cations such as Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ on the spectroscopic properties of the ligands was investigated in acetonitrile–dichloromethane (1:1) by means of absorption and emission spectrometry. Absorption spectra show isosbestic points in the spectrophotometric titration of Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Cu²⁺, Hg²⁺ and Pb²⁺ the results of which disclosed the complexation compositions and complex stability constants of the novel ligands with these cations. The monoazapentathia crown ether showed sensitivity for Al³⁺ with linear range and detection limit of 2.6 × 10⁻⁶ M–2.6 × 10⁻⁵ M and 8.1 × 10⁻⁷ M, respectively.     

Adsorptive Stripping Determination of Scandium(III) with Mordant Blue 9 on Silver Amalgam Film Electrode

A new adsorptive stripping voltammetric method for the determination of trace scandium(III) based on the adsorption of scandium(III)‐mordant blue 9 complex on the cyclic renewable mercury film silver based electrode (Hg(Ag)FE) is presented. The effects of various factors such as: preconcentration potential and time, pulse height, step potential and supporting electrolyte composition are optimized. The calibration graph is linear from 2 nM (0.09 μg L^?1) to 90 nM (4 μg L^?1) for a preconcentration time of 45 s, with correlation coefficient of 0.9995. For a Hg(Ag)FE with a surface area of 7.9 mm² the detection limit for a preconcentration time of 90 s is as low as 5 ng L^?1. The repeatability of the method at a concentration level of the analyte as low as 0.2 μg L^?1, expressed as RSD is 1.9 % (n=5). The proposed method was successfully applied and validated by studying the certified reference material (CRM 320 – river sediment) and natural samples with simultaneous recovery of Sc(III) from spiked water and sediment samples.     

LC/ESI‐MS/MS characterisation of lipopeptide biosurfactants produced by the Bacillus licheniformis V9T14 strain

Lipopeptide biosurfactants produced by the Bacillus licheniformis V9T14 strain showed an interesting anti‐adhesion activity against biofilm formation of human pathogenic bacterial strains. The chemical characterisation of the crude extract of V9T14 strain was first developed through electrospray ionisation mass spectrometry (ESI‐MS) and ESI‐MS/MS direct infusions: two sets of molecular ion species belonging to the fengycin and surfactin families were revealed and their structures defined, interpreting their product ion spectra. The LC/ESI‐MS analysis of the crude extract allowed to separate in different chromatogram ranges the homologues and the isoforms of the two lipopeptide families. The extract was then fractionated by silica gel chromatography in two main fractions, I and II. The purified biosurfactants were analysed through a new, rapid and suitable LC/ESI‐MS/MS method, which allowed characterising the composition and the structures of the produced lipopeptides. LC/ESI‐MS/MS analysis of fraction I showed the presence of C₁₃, C₁₄ and C₁₅ surfactin homologues, whose structures were confirmed by the product ion spectra of the sodiated molecules [M + Na]⁺ at m/z 1030, 1044 and 1058. LC/ESI‐MS/MS analysis of fraction II confirmed the presence of two main fengycin isoforms, with the protonated molecules [M + H]⁺ at m/z 1478 and 1506 corresponding to C₁₇ fengycin A and C₁₇ fengycin B, respectively. Other homologues (C₁₄ to C₁₆) were revealed and confirmed as belonging to fengycin A or B according to the retention times and the product ions generated, although with the same nominal mass. Finally, a relative percentage content of each homologue for both lipopeptides families in the whole extract was proposed. Copyright © 2010 John Wiley & Sons, Ltd.     

高效液相色谱的4种商品手性柱对38种手性化合物的拆分研究

采用纤维素-三(3,5-二甲基苯基氨基甲酸酯)涂敷型手性固定相(Chiralcel OD柱)、直链淀粉-三(3,5-二甲基苯基氨基甲酸酯)涂敷型手性固定相(Chiralpak AD柱)、直链淀粉-三(3,5-二甲基苯基氨基甲酸酯)键合型手性固定相(Chiralpak IA柱)和Pirkle型的(S,S)-Whelk-01手性固定相对38种外消旋体化合物进行手性拆分。实验结果表明,4种固定相的手性识别能力为:OD>AD>IA>(S,S)-Whelk-01,OD固定相的手性识别率达到60%,并且它们之间的手性识别性能还具有一定的互补性。本研究对4种常用手性固定相的拆分能力进行了对比,为拆分手性化合物时有的放矢地选择手性固定相提供了参考。     

Analysis of trace degradation products (decarboxylated diastereoisomers) of S-adenosylmethionine by electrophoresis in capillaries with cationic coatings (N-methylpolyvinylpyridinium or divalent barium)

Commercial preparations of S‐adenosylmethionine (SAM) when analyzed in uncoated capillaries show a minute impurity believed to be decarboxylated (dc) SAM. By using two types of cationic coatings, thus reducing the electro‐endo‐osmotic flow (EOF), it was possible to separate this impurity into two diastereoisomers of dcSAM. The coatings evaluated for this purpose were: (i) N‐methylpolyvinylpyridinium, used under reversed EOF at acidic conditions (pH 4.0) and (ii) deposition of divalent barium at alkaline pH values (pH 9.4), providing reduced EOF. Under these conditions, it was possible to separate this impurity into two diastereoisomers, which by chemical synthesis were indeed proven to be dcSAM. It was further demonstrated that, in the alkylation of 5′‐methylthioadenosine by 3‐bromopropylamine in bromidric acid to dcSAM, another minute impurity was present, proven, via mass spectrometry, to consist of S‐(5′‐adenosyl)‐3‐thiopropylamine (decarboxylated and demethylated (dc‐SAH)). The LOD for the two dcSAM diastereoisomers was assessed as 17.5 μg/mL and their LOQ as 25.5 μg/mL. By the barium‐based protocol it was possible to quantify the dcSAM, present in a commercial sample of SAM, as a 0.1% impurity.     

Thermosensitive gels incorporating polythioether units for the selective extraction of class b metal ions

Novel temperature-responsive copolymers of N-isopropylacrylamide and monoaza-tetrathioether derivative, were synthesized for the selective extraction of soft metal ions such as silver(I), copper(I), gold(III) and palladium(II) ion. The ratio between N-isopropylacrylamide group and monoaza-tetrathioether group in the copolymer was determined. The ratio between N-isopropylacrylamide group and monoaza-tetrathioether group varied in the range of 66:1–187:1. Each lower critical solution temperature (LCST) of the polymer solution was determined spectrophotometrically by the relative absorbance change at 750 nm via temperature of the polymer solution. Metal ion extraction using the copolymer with appropriate counter anions such as picrate ion, nitrate or perchlorate ion was examined. Soft metal ions such as silver(I), copper(I), gold(III) and palladium(II) ion were extracted selectively into the solid polymer phase. The extraction efficiency of a metal ion such as silver ion increased as the increase of the ratio of the monoaza-tetrathioether group to N-isopropylacrylamide group in the polymer. The quantitative extraction of class b metal ions as well as the liquid–liquid extraction of metal ions with monoaza-tetrathioether molecule was performed.     

Hemilability and regioselectivity in palladium and platinum complexes of dppm(E) [E = O, S, Se] ligands

Hemilability and nonrigidity in a series of mixed P^PE donor ligands where E = O, S, or Se have been studied in palladium and platinum complexes of the type [M{κ²-(dimethylamino)ethylnaphthyl-C,N)}(P^PE)][SbF₆] where P^PE = Ph₂PCH₂P(E)Ph₂.The role of the donor in hemilability, regioselectivity and the binding preferences of particular donors trans to the metallated carbon atom were also investigated. NMR parameters including couplings to ¹⁹⁵Pt and ⁷⁷Se were investigated for cis and trans isomers. The magnitude of ²J¹³C-⁷⁷Se couplings can readily distinguish the cis and trans isomers. A large through-space ¹³C-⁷⁷Se ³J coupling was observed in one of the amino methyl groups of the dppm(Se) complexes.     

基于声发射旋风分离器内颗粒粒度分析

采用声发射技术对旋风分离器内颗粒粒度进行分析,获得了声发射信号结构与分离器内气固两相运动行为的对应关系。选用0.4 mm、0.7 mm、1.5 mm和2 mm的活性炭颗粒进行实验,将采样得到声发射信号进行Daubechies二阶小波的1~9尺度分解,用R/S算法分别求取各个频段的Hurst指数。结果表明,声发射信号具有多尺度特征,依据hurst指数的不同,将其划分为微尺度、介尺度、宏尺度,分别反映颗粒间的无规则运动、主体流相对于系统运动或不同主体流之间的相互运动,整个系统相对于外界环境随时间的变化。在同一质量流量下,计算出各颗粒粒径对应的微尺度,介尺度分别所占总能量的比值。实验发现,固相颗粒粒径与其有很大的相关性;随着粒子尺寸的增大,微尺度信号所占的能量比率减少,介尺度能量所占的比率增加。声发射技术可用于旋风分离器内颗粒粒度的分析。