Multi-scale magnetic resonance measurements and validation of Discrete Element Model simulations

This short review describes the capabilities of magnetic resonance (MR) to image opaque single- and two-phase granular systems, such as rotating cylinders and gas-fluidized beds operated in different fluidization regimes. The unique capability of MR to not only image the solids’ distribution (voidage) but also the velocity of the particulate phase is clearly shown. It is demonstrated that MR can provide measurements over different length and time scales. With the MR equipment used for the studies summarized here, temporal and spatial scales range from sub-millisecond to hours and from a few hundred micrometres to a few centimetres, respectively. Besides providing crucial data required for an improved understanding of the underlying physics of granular flows, multi-scale MR measurements were also used to validate numerical simulations of granular systems. It is shown that predictions of time-averaged properties, such as voidage and velocity of the particulate phase, made using the Discrete Element Model agree very well with MR measurements.     

Development and construction of rotating polarizer analyzer ellipsometer

A detailed mathematical derivation and an experimental characterization of one to two ratio rotating polarizer analyzer ellipsometer (RPAE) are presented. The alignment, calibration, and testing of reference samples are also discussed. The optical properties of some known materials obtained by the proposed ellipsometer will be shown and compared to accepted values. Moreover, the constructed ellipsometer will be tested using two ellipsometry standards with different thicknesses.     

镀镍整平剂整平能力的阳极溶出法测量

采有阳极溶出法，利用旋转园盘电极的高低转速状态模拟微观不平整表面的峰谷处，对镀镍整平剂的整平能力进行了测量，结果表明，该方法同传统的用镀层金相显微照片计算整平能力的方法测量结果一致，并且简便，易于操作，在Ｗａｔｔｓ镀液中分别整平剂香豆素和硫脲，测得香豆素和硫脲的整平最佳浓度分别为０．３ｇ／ｌ和０．１６ｇ／ｌ。     

The Mediation Effect of a Polyaniline-Coated Electrode on the Reduction of Iron (III) Ions

The mediation effect of polyaniline-coated platinum electrodes on the reduction of iron(III) ions was studied by the cyclic voltammetry and rotating disk electrode methods. The rate constants of the cross reaction between iron(III) ions and polyaniline (PA) were found to depend upon the amount of PA coated on the electrode. On the basis of the rate constants the PA-coated electrode mediates the reduction of iron(III) ion efficiently and behaves as well as a metallic electrode.     

Ultrasonic agitation in microchannels

This paper describes an acoustic method for inducing rotating vortex flows in microchannels. An ultrasonic crystal is used to create an acoustic standing wave field in the channel and thus induce a Rayleigh flow transverse to the laminar flow in the channel. Mixing in microchannels is strictly diffusion-limited because of the laminar flow, a transverse flow will greatly enhance mixing of the reactants. This is especially evident in chemical microsystems in which the chemical reaction is performed on a solid phase and only one reactant is actually diffusing. The method has been evaluated on two different systems, a mixing channel with two parallel flows and a porous silicon micro enzyme reactor for protein digestion. In both systems a significant increase of the mixing ratio is detected in a narrow band of frequency for the actuating ultrasound.     

Angular interferometer using calcite prism and rotating analyzer

An interferometer using a calcite prism and rotating analyzer is proposed for angular displacement determinations. The calcite prism senses the angular displacements and the rotating analyzer transfers the interference signals from dc-type into ac-type. Compact optical setup and using low-cost devices are thus the advantages of the interferometer. The theory of the interferometer is first demonstrated. A setup constructed to realize the interferometer and the results of using this setup are then presented.     

CdS films deposited by chemical bath under rotation

Cadmium sulfide (CdS) films were deposited on rotating substrates by the chemical bath technique. The effects of the rotation speed on the morphological, optical, and structural properties of the films were discussed. A rotating substrate-holder was fabricated such that substrates can be taken out from the bath during the deposition. CdS films were deposited at different deposition times (10, 20, 30, 40 and 50 min) onto Corning glass substrates at different rotation velocities (150, 300, 450, and 600 rpm) during chemical deposition. The chemical bath was composed by CdCl₂, KOH, NH₄NO₃ and CS(NH₂)₂ as chemical reagents and heated at 75 °C. The results show no critical effects on the band gap energy and the surface roughness of the CdS films when the rotation speed changes. However, a linear increase on the deposition rate with the rotation energy was observed, meanwhile the stoichiometry was strongly affected by the rotation speed, resulting a better 1:1 Cd/S ratio as speed increases. Rotation effects may be of interest in industrial production of CdTe/CdS solar cells.     

A simple proof of the linear instability of rotating liquid drops

We give a simplified proof of the linear instability of equilibrium figures of rotating liquid based on energy estimates.      

A modeling concept of a mechanical system having a piecewise linear spring property for its diagnosis

Machine condition monitoring and fault diagnosis of rotating machinery are very important because of the wide use of rotating machinery in industry. Couplings and gears are used in many mechanical systems to connect elements and transmit power. The system is usually modeled as a single-degree-of-freedom system with a piecewise linear spring property, where the mass of main machine is only considered. In the present study, the dynamic behavior of a system with an unsymmetrical nonlinearity and a significant mass of the connecting part was investigated both experimentally and by numerical simulation. In the experiment, a 1/3 sub-harmonic oscillation was observed, but this oscillation was not found in the simulation using a single-degree-of-freedom system, in which the mass of the connecting part was ignored. However, when a two-degrees-of-freedom system was used that considered both the mass of the connecting part and the impact property, the 1/3 sub-harmonic oscillation was observed. Thus it is recognized that an adequate mathematical model for diagnosis in the early stage of abnormality must be selected on the basis of the mass ratio between the connecting part and the main body.