KINETIC MODELING OF ESTERIFICATION OF EPOXY RESIN IN THE PRESENCE OF TRIPHENYLPHOSPHINE FOR PRODUCING VINYL ESTER RESIN: MECHANISTIC RATE EQUATION

Due to its mechanical properties and ease of use, vinyl ester resin is enjoying increasing consideration. This resin normally is produced by reaction between epoxy resin and unsaturated carboxylic acid. In the present study, bis-phenol A based epoxy resin and methacrylic acid was used to produce vinyl ester resin. The reaction was conducted under both stoichiometric and non-stoichiometric conditions in the presence of triphenylphosphine as catalyst. The stoichiometric and non-stoichiometric experiments were conducted at 95, 100, 105 and 110℃and at 90 and 95℃, respectively. The first order rate equation and mechanism based rate equation were examined. Parameters are evaluated by least square method. A comparison of mechanism based rate equation and experimental data show an excellent agreement. Finally, Arrhenius equation and activation energy were presented.     

定标粒子理论计算非水溶液的盐效应常数

本文应用定标粒子理论计算了非电解质溶质在盐(NaI、或KI)和环丁砜组成的非水电解质溶液中溶解度的盐效应常数。硬球作用项采用Masterton-Lee的方法。软球作用项采用胡英等的径向分布函数处理方法, 并考虑进了偶极-偶极、偶极-诱导偶极、电荷-偶极和电荷-诱导偶极等相互作用。分子的硬球直径σ和能量参数∈/k由经验方程计算。由理论值和实验结果比较得出: 当σ_2取0.563 nm、离子半径取电子密度标度时, 理论值与实验值符合得较好。     

Long-range dispersion coefficients for like centrosymmetric linear molecules and an application to H2-H2

The real spherical tensor theory of long-range intermolecular coefficients developed in previous papers is applied to derive explicit formulae for the first three dispersion coefficients for like centrosymmetric linear molecules. The expansion of angle-dependent coefficients in associated Legendre polynomials allows one to identify the isotropic and anisotropic components of the dispersion interaction in terms of London dispersion constants, the treatment of higher coefficients being simplified by the coupling of the elementary (l, l′)-polarizations to resultant angular momenta L_A and L_B onto each molecule. The contributions from all coupling schemes are given explicitly for C₆, C₈, C₁₀, and numerical results are presented for H₂-H₂ using two-term reduced spectra values from the Kaiserlautern group.     

Thermodynamics of multicomponent electrolyte solutions: Aqueous mixtures of two salts from among NaCl,KCl, NaH2PO4, and KH2PO4 at 25° C

Five of the six possible aqueous two-salt mixtures from among NaCl, KCl, NaH₂PO₄,and KH₂PO₄ have been studied by the isopiestic method at 25°C. The sixth mixture, NaCl–KCl, has been studied previously. The deviations from ideal mixing behavior are described by a series of coefficients which were found by regression analysis. The coefficients were used to calculate the excess Gibbs energies of mixing for equal ionic strength fractions of each salt and the trace activity coefficient of each salt at an ionic strength of 2 mode-kg^–1. The cross-square mixing rule is obeyed within experimental uncertainty for the excess Gibbs energies of mixing.     

Reaction kinetics of the selective liquid phase hydrogenation of styrene oxide to β-phenethyl alcohol

Liquid phase hydrogenation of styrene oxide using 1% Pd/C and NaOH as a promoter was found to give selectively β-phenethyl alcohol (PEA) under very mild conditions (313–333 K; 0.68–5.5 MPa). The kinetics of this system was investigated by collecting initial rate data in a batch slurry reactor. Rate of hydrogenation was found to decrease beyond a certain concentration of both hydrogen (>3 MPa) and styrene oxide (>0.5 kmol/m³). A Langmuir–Hinshelwood type rate equation has been proposed based on the initial rate data in the kinetic regime. The model predictions agree very well with the experimentally observed concentration–time data indicating the applicability of the proposed rate model.     

Origin and meaning of the Fermi contact interaction

The Fermi-contact interaction (FCI) can easily be derived from 1st order perturbation theory applied to the non-relativistic wave equation for a spin-(1/2) particle of Lévy-Leblond, with the nuclear spin described by the field of an external magnetic dipole, and it results from the fact that the turn-over-rule for the operator is only valid if the derivatives implicit in are taken in the distribution sense. If one avoids to apply the turn-over-rule, the FCI is obtained without the need to introduce a -function. It is also shown that the formulation of a magnetic point dipole as the limit of an extended nucleus directly leads to the FCI. Traditional methods of the derivation of the FCI are analyzed in the light of this new interpretation. It is then explained why the perturbation expansions in powers of the magnetic moment of the nucleus necessarily diverges, but that the expression for the 1st order energy on which the concept of the FCI is based, can nevertheless be justified by means of the Hellmann-Feynman theorem with a correction term if singular wave functions are involved. Finally some comments on a theory beyond first order are made.Dedicated to Professor J. Koutecký on the occasion of his 65th birthday     

Fermentation characteristics and the dynamic trend of chemical components during fermentation of Massa Medicata Fermentata

As a representative of traditionally fermented Chinese medicine, Massa Medicata Fermentata (MMF) shows the functions of invigorating the spleen and stomach and promoting digestion, which plays an important role in the treatment of gastrointestinal diseases. The fermentation mechanism and the key factors that affect the quality of MMF have not been revealed yet, which has become an urgent issue that limits its clinical application. This article aims to systematically and comprehensively reveal the transformation of physical properties and the dynamic trend of chemical components including substrate components, volatile components, and lactic acid as anaerobic fermentation product during MMF fermentation. Along with obvious hyphae growth observed for MMF, the weight of MMF decreased, and the moisture and temperature increased. Through the quantified 14 components from substrate, ferulic acid increased from 45.53 ± 6.94 to 141.89 ± 78.40 μg/g, while glycosides and phenolic acids declined except caffeic acid. Also, within the 66 volatile components analyzed, alcohols and acids increased, while aldehydes and ketones decreased. Lactic acid was not detected in the fermentation substrate, but an apparent increase in lactic acid content was observed along with the increased fermentation days, resulting in 2.54 ± 0.15 mg/g on day 8. Based on the tested components, the fermentation process of MMF was discriminated into three distinct stages by principal component analysis, and an optimal fermentation time of four days was proposed. The results of this study will be of great significance to clarify the characteristics of fermentation and conduce to improving quality standards of MMF.     

Mono- and diboronates derived from tridentate ONO ligands and arylboronic acids

The syntheses of eight [4.3.0] heterobicyclic boronates containing a N → B coordinative bond are described. The monomeric compounds were prepared by reaction of arylboronic acids with a tridentate ligand having the ONO donor set of atoms. It was shown that substituents at the para-position of the B-phenyl moiety transmit electronic effects to the CN bond which in turn is polarized by formation of the N → B coordination bond. At the same time, related tridentate ligands were also reacted with 1,4-benzenediboronic acid in order to prepare benzene diboron complexes. The structure of this type of compounds was confirmed by X-ray analysis for one of the derivatives.     

An algorithm for the calculation of the electrostatic repulsion between surface coated with a charge membrane

We propose a numerical procedure for the calculation of the electrostatic repulsion force between two identical, parallel surfaces immersed in anab electrolyte solution. These surfaces are coated with an ion-penetrable membrane carrying fixed charges. The amount of fixed charges is governed by the dissociation of the functional groups in the membrane phase. The effect of pH on the degree of dissociation of these functional groups is taken into account. The difficulty of extensive use of Jacobi elliptic function in the numerical treatment of Poisson-Boltzmann equation can be circumvented by resorting to the present algorithm.     

Shape analysis based critical Eotvos numbers for buoyancy induced partial detachment of oil drops from hydrophilic surfaces

Removal of oil drops from solid surfaces immersed in an aqueous medium is of interest in many applications. It has been shown that drop shape analysis can be used to predict conditions at which the stability limit of a lighter than water oil drop on a solid surface immersed in an aqueous bath is reached (Adv. Colloid Interface Sci. 98 (2002) 265). However the above analysis is restricted to cases where the contact angle made by the drop is below 90degrees and when the surface conditions result in a 'pinned' contact line. In this paper, it is shown that drop shape analysis can be used to predict the critical conditions at which drop stability limit is reached for drop contact angles of 90degrees and above, which is encountered with 'hydrophilic' surfaces. This critical condition can predict the occurrence of partial oil drop detachment, before complete removal due to 'roll-up', which occurs when the hydrophilic surface is adequately smooth which prevents 'pinning' of the contact line. The critical conditions at which partial drop detachment occurs can also be approximately predicted from simple force balances. It has been shown (Adv. Colloid Interface Sci. 98 (2002) 265) that for contact angles less than 90degrees, the critical limit based on shape analysis appears to resolve the differences that arise due to alternate expressions for capillary retention force. This paper shows that even for contact angles above 90degrees, the critical conditions predicted from the shape analysis resolves the differences in the predictions from the alternate force balances. Drop shape analysis used in this paper is based on the 'Arc-length' form of Young-Laplace or 'drop shape' equation, which is different from the 'Y vs X' form of the above equation that is used in Adv. Colloid Interface Sci. 98 (2002) 265. The above drop shape equation is solved by a fourth order Runge-Kutta technique and it is shown that for angles less than 90degrees, the two forms of the drop shape equation, predict almost identical values of the critical Eotvos number. This paper highlights the competing effects of interfacial tension lowering induced drop instability and 'roll-up', a term that is used to describe the retraction of the contact line of an oil drop on a surface, in being the primary c ause for drop detachment.