基于规范文本的特征词提取技术研究

文本特征词提取是一种提炼文本重要信息的实用技术,同时也为文本聚类、自动分类、信息抽取等相关课题提供了技术支持。在规范文本上,利用文本篇章结构的特征,以此为基础设计了一个特征词的加权函数,综合考虑了词频、词长和位置因子,并对比分析了各种位置因子对系统的贡献度。     

试论新历史小说创作艺术的古典回潮

新历史小说创作存在着明显的古典艺术回潮迹象。这既与创作的历史转向有关，也是叙述形式探索及创作的解构性所导致的。然而思想内蕴与艺术形式的背反显示作者意图不在重温古典旧梦，而是“仿古说今”。不过，这种艺术倾向丰富了新历史小说创作的审美探索和思想意蕴，形成其解构与建构相交织的复杂文化价值立场。     

High-resolution infrared spectroscopy of NNO and NNO in the 1200–3500 cm region

We present a continuation of our investigation of the second most abundant isotopic species of nitrous oxide, ¹⁴N¹⁵N¹⁶O and ¹⁵N¹⁴N¹⁶O, in the infrared (IR). Our two previous contributions looked at the 3500–9000 cm⁻¹ region for ¹⁴N¹⁵N¹⁶O and ¹⁵N¹⁴N¹⁶O, respectively, in the 3500–9000 cm⁻¹ region. The use of highly enriched isotopologue samples in this study allowed us to go further into the IR, down to 1200 cm⁻¹. A total of 2 2742 transitions have been assigned based on the effective Hamiltonian model, with 108 of them being reported here for the first time. Rovibrational analyses of 98, 101, 8, 3, 6, 1 and 1 bands for the ¹⁴N¹⁵N¹⁶O, ¹⁵N¹⁴N¹⁶O, ¹⁵N¹⁵N¹⁶O, ¹⁴N¹⁵N¹⁸O, ¹⁵N¹⁴N¹⁸O, ¹⁴N¹⁵N¹⁷O and ¹⁵N¹⁴N¹⁷O isotopologues, respectively, were also performed.     

标定原理的实验室模拟

文中重点对地面防空武器系统标定原理进行了论述,同时给出了在实验室条件下利用2台光学经纬仪模拟实际装备间的基准标定问题,从原理和实际对准中找到解决问题的办法,把依赖实际装备教学行为转变为理论与测试仪器设备相结合的形象教学,学员通过模拟实验同样达到了与实装教学相同的效果,在实践教学中发挥了很好的作用。     

高位钻孔瓦斯抽采参数优化设计

基于采空区覆岩裂隙分布规律、覆岩裂隙瓦斯流动规律和高位钻孔抽采技术研究现状,从覆岩"竖三带"、"O"形圈和U型通风条件下采动裂隙瓦斯流动规律出发,找出高位钻孔的理论合理布置区域,指出工作面后方50m范围内覆岩裂隙发育状况是高位钻孔层位设计的关键,针对祁南煤矿32煤层的特点,结合现场采用数值模拟方法模拟不同开采速度条件下覆岩裂隙发育规律,优化设计高位钻孔的抽采参数,在34下2工作面和3410工作面的现场试验中,高位钻孔抽采浓度和抽采率得到大大提高,取得了较好的抽采效果,验证了研究的正确性。     

Rotation rate of a three-wing rotor illuminated by upward-directed focused beam in optical tweezers

The optical torque and the trapping position (focal point) in optical tweezers are analyzed for upward-directed focused laser illumination using a ray optics model, considering that laser light is incident at not only the lower surface but also the side surface of a 3-wing rotor. The viscous drag force due to the pressure and the shearing stress on all surfaces of the rotor is evaluated using computational fluid dynamics. The rotation rate is simulated in water by balancing the optical torque with the drag force, resulting in 500 rpm for an SU-8 rotor with 20 μm diameter at a laser power of 200 mW. The trapping position is estimated to be 7.6 μm in the rotor with an upward-directed laser at 200 mW via an objective lens having a numerical aperture of 1.4. Both the rotation rate and the trapping position agree well with the values obtained in the experiment.     

Nonlinear optical properties of stimulated Brillouin scattering process in submerged object detection

Nonlinear optical properties of stimulated Brillouin scattering(SBS)to signal detection in water are analyzed.With the threshold characteristics,SBS only occnrs when the high power laser is focused in the SBS cell.When there is an object present in front of the focus,it leads to lower incident intensity and then SBS does not occur.The backward SBS signal depends on the focusing location.The nonlinear optical properties of SBS process in the focusing regime axe analyzed theoretically.With the object coming near to the focusing center,the backward Stokes signal rises up from zero to a maximum,and then grows to saturation.The delay time of the echo signal to pump signal can give the object location.In experiment,the peak position of varying rate of energy can give object location.     

Design of the low energy beam transport line for the China spallation neutron source

The design of the China Spallation Neutron Source (CSNS) low-energy beam transport (LEBT) line, which locates between the ion source and the radio-frequency quadrupole (RFQ), has been completed with the TRACE3D code. The design aims at perfect matching, primary chopping, a small emittance growth and sufficient space for beam diagnostics. The line consists of three solenoids, three vacuum chambers, two steering magnets and a pre-chopper. The total length of LEBT is about 1.74 m. This LEBT is designed to transfer 20 mA of H-pulsed beam from the ion source to the RFQ. An induction cavity is adopted as the pre-chopper.The electrostatic octupole steerer is discussed as a candidate. A four-quadrant aperture for beam scraping and beam position monitoring is designed.