A Modified SQP Method and Its Global Convergence

The sequential quadratic programming method developed by Wilson, Han andPowell may fail if the quadratic programming subproblems become infeasibleor if the associated sequence of search directions is unbounded. In [1], Hanand Burke give a modification to this method wherein the QP subproblem isaltered in a way which guarantees that the associated constraint region isnonempty and for which a robust convergence theory is established. In thispaper, we give a modification to the QP subproblem and provide a modifiedSQP method. Under some conditions, we prove that the algorithm eitherterminates at a Kuhn–Tucker point within finite steps or generates aninfinite sequence whose every cluster is a Kuhn–Tucker point.Finally, we give some numerical examples.     

求解一类变形变分不等式的投影收缩算法及其性质

对一类变形的变分不等式：求，使得提出了一类投影收缩算法，并得到了该算法的收敛性及相关性质．     

弹性力学的Lagrange形式：用Routh方法建立弹性有限变形问题的基本方程

将弹性有限变形问题纳入Lagrange力学的理论体系中，并用经典力学中业已存在的Routh方法构建了有限变形平面应变问题和有限变形平面应力问题的基本微分方程，讨论了有限变形大挠度问题vonkarman方程中存在的矛盾进而提出了两种改进方案．     

浅析地籍测量及成图方法

对目前我国地籍测量试点区测图方法进行了有代表性的具体归纳,并对其成图精度进行了比较,在此基础上分析了各种成图方法之优劣及各自适用范围,以便各种测量方法在成图过程中发挥最佳效益。     

超微粒MnO_2的合成

以MnCl_2和NaOH为原料,采用胶溶法,制备了超微粒MnO_2制得的MnO_2超微粒为非晶态,直径6.0～10.0 nm,呈球状,在有机溶剂中具有良好的分散性和透明性,考察了影响氧化锰溶胶调制的因素,获得了最佳制胶条件,研究了表面活性剂用量与Mn迁移率的关系;通过X-光粉末衍射、红外光谱、热重及差热分析,研究了产品的结构性能。     

确定威布尔分布三参数的一种计算方法

威布尔分布是描述部件寿伞的一种极为主要的分布,本文对确定威布尔分布的三参数,给出了一种试探性算法,方法简单、实用。     

用多剖面法测试焊接接头的断裂韧性

本文用试验测定和理论计算表明,在多剖面法中利用复合试样测定焊接接头断裂韧性时,可测到的HAZ小区与板厚、试样厚度、线能量、预热温度及坡口角度等因素有关,并非总能测出全部小区的δ_(is)值.对提高测试精度的有关技术问题进行了探讨.     

Ba（n，x）~（134）Cs，~（134）Ba（n，2n）~（133）Ba，

用中子活化法相对于５４Ｆｅ（ｎ，Ｐ）５４Ｍｎ反应，在１３．５０—１４．８０ＭｅＶ中子能区测量了Ｂａ（ｎ，ｘ）１３４Ｃｓ，１３４Ｂａ（ｎ，２ｎ）１３３Ｂａ，１４０Ｃｅ（ｎ，２ｎ）１３９Ｃｅ，１４２Ｃｅ（ｎ，２ｎ）１４１Ｃｅ和２３Ｎａ（ｎ，２ｎ）２２Ｎａ的反应截面．并将所测的结果和其他作者的结果进行了比较，中子能量是用９０Ｚｒ（ｎ，２ｎ）８９ｍ＋ｇＺｒ反应和９３Ｎｂ（ｎ，２ｎ）９２ｍＮｂ反应截面比法测定的。     

Vibrational control of crystal growth from liquid phase

Modeling and numerical simulations of the convective flows induced by the vibration of the monocrystal during crystal growth have been performed for two configurations simulating the Cz and FZ methods. This permitted to emphasize the role of different vibrational mechanisms in the formation of the average flows. It is shown that an appropriate combination of these mechanisms can be used to counteract the usual convective flows (buoyancy- and/or thermocapillary-driven) inherent to crystal growth processes from the liquid phase. While vibrational convection is rather complex due to these identified mechanisms, the new modeling used in the present paper opens up very promising perspectives to efficiently control heat and mass transfer during real industrial applications of crystal growth from the liquid phase.     

电流并联负反馈放大器实验的研究

用实验的方法，研究电流并联负反馈对放大器性能的改善，提出电流型、并联型负反馈放大器性能参数的测量方法。