无机类富勒烯MoS2纳米材料的制备与表征

The Inorganic Fullerene-like MoS2 was obtained by a simple precipitation method using the polyethylenegly colas the dispersant,The hydroxylamine hydrochloride as the reductant, and (NH4)2S as the sulfursource. Themorphology and structure of the product were characterized by Powder X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM) and High-resolution Transmission Electron Microscopy (HRTEM). The results suggest that the polyethylene glycol dispersant can be adsorbed on the particle surface of the reaction precursor, amorphous MoS2 powders, to form a relative isolated environment. This isolated environment may induce an obstruct effect which helps the precursor nano-particles transfer to the IF structure in the subsequent calcinations process.     

A method for Ca, Fe, Ga, Na, Si and Zn determination in alumina by inductively coupled plasma optical emission spectrometry after aluminum precipitation

In this present work a method for the determination of Ca, Fe, Ga, Na, Si and Zn in alumina (Al₂O₃) by inductively coupled plasma optical emission spectrometry (ICP OES) with axial viewing is presented. Preliminary studies revealed intense aluminum spectral interference over the majority of elements and reaction between aluminum and quartz to form aluminosilicate, reducing drastically the lifetime of the torch. To overcome these problems alumina samples (250 mg) were dissolved with 5 mL HCl + 1.5 mL H₂SO₄ + 1.5 mL H₂O in a microwave oven. After complete dissolution the volume was completed to 20 mL and aluminum was precipitated as Al(OH)₃ with NH₃ (by bubbling NH₃ into the solution up to a pH ~ 8, for 10 min). The use of internal standards (Fe/Be, Ga/Dy, Zn/In and Na/Sc) was essential to obtain precise and accurate results. The reliability of the proposed method was checked by analysis of alumina certified reference material (Alumina Reduction Grade-699, NIST). The found concentrations (0.037% w w⁻¹ CaO, 0.013% w w⁻¹ Fe₂O₃, 0.012% w w⁻¹ Ga₂O₃, 0.49% w w⁻¹ Na₂O, 0.014% w w⁻¹ SiO₂ and 0.013% w w⁻¹ ZnO) presented no statistical differences compared to the certified values at a 95% confidence level.     

Molecularly imprinted polymers by reversible addition-fragmentation chain transfer precipitation polymerization for preconcentration of atrazine in food matrices

Controlled/living free radical polymerization (CLRP) has been accepted as an effective technique in preparation of polymers because of its inherent advantages over traditional free radical polymerization. In this work, reversible addition-fragmentation chain transfer (RAFT) polymerization, the ideal candidate for CLRP, was applied to prepare atrazine molecularly imprinted polymers (MIPs) by precipitation polymerization. The resultant RAFT-MIPs demonstrated uniform spherical shape with rough surface containing significant amounts of micropores, leading to an improvement in imprinting efficiency compared with that of the MIPs prepared by traditional precipitation polymerization (TR-MIPs). The maximum binding capacities of the RAFT-MIPs and TR-MIPs were 2.89 mg g⁻¹ and 1.53 mg g⁻¹, respectively. The recoveries ranging from 81.5% to 100.9% were achieved by one-step extraction by using RAFT-MIPs for preconcentration and selective separation of atrazine in spiked lettuce and corn samples. These results provided the possibility for the separation and enrichment of atrazine from complicated matrices by RAFT-MIPs.     

锆存在时铀中杂质元素的化学分离-ICP-AES法

采用磷酸三丁酯（TBP）－氢化煤油萃取油、过氧化氢掩蔽钛、磷酸氢二铵沉淀锆的方法，用ICP－AES法同时测定了锆存在在时铀中的铁、锰、铜、硅、铝、镍和钛7种杂质元素的含量。当测定范围在100μg/g-1000μg/g时，相对标准偏差＜9．0％，回收率为96％－109％。     

Flow Injection Analysis of Hydrogen Peroxide,Sulfite, Formaldehyde and Hydroxymethanesulfonic Acid in Precipitation Samples

Abstract

Hydroxymethanesulfonic acid (HMSA), the reaction product of sulfite and formaldehyde plays an important part in the aqueous phase conversion of sulfite to sulfate. HMSA is fairly stable under acidic conditions and in presence of hydrogen peroxide. Sulfite is unstable under these conditions.

A flow injection set-up was developed, which allows the determination of H₂O₂, sulfite, formaldehyde and hydroxymethanesulfonic acid.

H₂O₂ analysis by amperometric detection offers the possibility of a simple, robust field instrument. The detection limit is 5μg/l and the method is linear up to 5mg/l.

Based on the 4,4-dithiodipyridine/sulfite reaction selective and sensitive spectrophotometric detections were developed for sulfite, formaldehyde and hydroxymethanesulfonic acid. The detection limit of these compounds is 50μg/l and the method is linear up to 5mg/l.

A large fraction of S(IV) is present as HMSA in fog, dew and precipitation samples in The Netherlands.     

离心沉淀气相色谱法测定面粉中过氧化苯甲酰含量的研究

建立了离心沉淀,气相色谱氢火焰离子化检测器测定面粉中过氧化苯甲酰含量的方法。考察了不同提取时间和采用不同工作曲线对过氧化苯甲酰测定的影响。试样在石油醚中被冰乙酸还原成苯甲酸,经HP-5（30m×0．25mm×0．25μm）毛细管气相色谱柱分离,氢火焰离子化检测器测定。方法的线性范围为0．005～0．08g／L（r=0．9992）,检出限（S／N=3）为2mg／kg。在添标水平为0．06、0．18和0．30g／kg时的平均回收率为82．70％～89．46％,相对标准偏差为3．77％～6．93％。该方法仪器设备简单,测定结果灵敏、准确,适合面粉中过氧化苯甲酰的测定。     

Selective Removal of Sulfate from Water by Precipitation with a Rigid Bis-amidinium Compound

A simple, readily prepared biphenyl bis-amidinium compound ( 1⋅Cl₂ ) is able to selectively precipitate sulfate from water. The precipitant is effective at concentrations as low as 1 mM and shows complete selectivity against monovalent anions, and high selectivity even against CO₃²⁻ and HPO₄²⁻. It is highly effective (>90 % sulfate removed) in both seawater and highly acidic conditions relevant to mining waste-streams. X-ray crystallography reveals that 1⋅SO₄ forms a tightly packed, anhydrous, structure where each sulfate anion receives eight hydrogen bonds from amidinium N−H hydrogen bond donors.     

Preparation of polymer nanocomposites with “ultrahigh” refractive index

Nanocomposites of lead sulfide and several polymers, especially poly(ethyleneoxide), were prepared by coprecipitation of lead sulfide and polymer, followed by a drying and pressing procedure. Such nanocomposites consist of ca. 90% w/w (or ca. 50% v/v) lead sulfide, of particle dimensions of 2–40 nm. The refractive index of these materials is on the order of 3 and therefore, to the authors' best knowledge, is the highest reported for any polymer composite.     

Pb(Ⅱ)与8-羟基喹啉沉淀反应及其分析应用

研究了在乙酸盐络合保护作用下,8-羟基喹啉与Pb(Ⅱ)沉淀反应条件,测得了8-羟基喹啉铅螯合物的红外光谱图及差热分析数据,结果表明,8-羟基喹啉铅螫合物适合于重量分析,应用于巴氏合金中高含量铅的分析测定,获得了满意的结果。     

New method for the preparation of small diameter columns with polymeric stationary phases for open tubular liquid chromatography

The purpose of this report is to introduce a new method for use in coating polymeric stationary phase films on the inside wall of small bore diameter fused silica capillary tubing. This technique is being developed for use in fabricating capillary columns for open tubular liquid chromatography.