主动离焦三维测量的调制度全局计算方法

提出了离焦三维测量的全局计算方法。通过向物体投射正弦光栅,使物体上任一点的光分布在光栅频率(局域傅里叶变换)处的光强度等于该处的调制度,利用拍摄物体的两幅离焦像的调制度之比,得到了物体的深度分布。不但消除了过去主动离焦三维测量采用局域傅里叶变换带来的测量误差,同时计算程序简单、速度快,具有较好的实用性。     

大庆油田和南阳油田采出水的分析

采用高压消解罐法消解处理样品,对大庆油田和南阳油田几个驱块的采出水样品进行了全离子分析.用ICP-AES测定了其中Na、K、Ca、Mg、Al、Ba、Sr、Mn、Si元素的含量.方法回收率在95.00%-106.00%,相对标准偏差小于2.15%.采用离子色谱测定了各驱采出水中Cl<'->、SO<,4><'2->含量,方...     

紫外-可见分光光度法在植物多糖含量测定中的应用

紫外-可见分光光度法(UV-Vis)是目前国内比较常见的一种光谱学测量方法.且近年来,其在植物多糖含量测定领域的应用越来越多.本文从UV-Vis测定植物多糖含量过程中的显色剂选取、各种条件的优化以及具体应用等方面进行综述.     

A structured light-based system for human heads

The 3-D modeling of heads by using optical triangulation techniques is of great interest in the context of virtual reality, telecommunication and computer animation. This paper presents a structured light-based system mainly for human heads. It is named “3-D Laser Color Scanner” (3DLCS). A 3-D model is obtained with a cylindrical scan. The laser beam is switched on and off using a “light valve” and two successive CCD frames are captured, one with the laser line showing and one without. We can simplify the laser line extracting by subtracting these two images.In this system, two CCD cameras are used to avoid occlusion problems. Color information is read from the CCD when the laser light is absent. Since traditional laser scanner will miss the range data in the low-reflectance areas such as the hair area of human head, a shape from silhouette algorithm is presented to overcome this problem. Finally, we give some results using our system. The resulting model is suitable for many applications.     

Synthesis, growth, spectral, thermal and photoluminescence properties of a new semiorganic NLO crystal—Thiosemicarbazide lithium chloride [TSLC]

Thiosemicarbazide lithium chloride [TSLC] a new semiorganic nonlinear optical crystal has been synthesized. Single crystals by TSLC have been grown by slow evaporation solution growth technique at room temperature. Chemical composition of the synthesized material was confirmed by elemental analysis. Powder X-ray diffraction (XRD) pattern of the grown crystal has been studied. Functional groups present in the materials were identified by FT IR spectral analysis ranging between 4000 and 450 cm⁻¹. The optical transmission was studied through UV-vis spectrophotometer. Thermal analysis is carried out on the crystal and inferred to be stable at 176 °C. The second harmonic generation (SHG) of the TSLC crystal was confirmed using Nd:YAG laser and also fluorescence spectral analysis is carried out for the TSLC crystal.     

Boundary coupled dual-equation numerical simulation on mass transfer in the Process of laser cladding

The coupled numerical simulation on fluid flow, heat transfer, and mass transfer in the process of laser cladding is undertaken on the basis of the continuum model.In the simulation of mass transfer in the laser molten pool, the concentration distribution in the regions on different sides of the interface between cladding layer and substrate is calculated separately and coupled at the co-boundary.The non-equilibrium solute partition coefficient is obtained from equilibrium solute partition coefficient according to the Sobolev model.By using the developed software which is based on the commercial software PHOENICS 1.4, the distribution of Fe in laser molten pool in an experiment of cladding Stellite 6 on 12CrMoV is calculated.The obtained results well coincide with the experimental ones.     

基于CMOS图像传感器的微型无人机遥感系统设计

为了实现微小型无人机航空遥感,设计了一种基于CMOS图像传感器的微小型无人机的可见光遥感系统.系统采用CMOS图像传感器替代CCD,利用时序发生模块(Field-Prog Rammble Array,FPRA)实现了控制时序、数据缓存和硬件彩色插值,C8051F单片机作为主控核心,采用FLASH作为数据存储单元,设计了PAL制视频信号生成电路.介绍了所用CMOS图像传感器的特性,分析了Bayer颜色格式进行彩色插值恢复标准RGB颜色格式的硬件实现与软件算法.整个系统重量约20 g,功耗约2 W.在一款翼展800 mm的无人机上实现了遥感拍照,给出了处理后的拍照结果.     

聚焦形貌恢复方法模型设计

采用基于拉普拉斯算符聚焦形貌恢复方法,提出了模拟目标深度测量的数值模型。数值模拟的核心是基于通过几何光学预测的理想图像的卷积与透镜广义孔径函数的多色点扩散函数,即用聚焦误差替代抛物线圆柱形貌或高斯函数。该模型可以使用基于聚焦形貌恢复方法的传感器真实组件参数、光源光谱、光学系统离差、相机的光谱灵敏度。提出了光学系统离差（消球差、消色差、色差）对确定目标表面形貌的精确度和可靠性的影响。结果表明,该模型可以有效提高实验效率,缩短时滞,降低成本。     

不同产地中国沙棘的傅里叶变换红外光谱识别研究

采用傅里叶变换红外光谱结合二阶导数光谱对不同产地的中国沙棘进行识别研究。结果表明,不同产地中国沙棘的一维红外光谱在2 925,2 854,1 743,1 541和1 173cm~(-1)等处都有表征脂类、黄酮类和糖类成分的特征吸收峰。但因产地不同,各样本吸收峰的位置和强度均存在一定差异。此外,3 429~3 336cm~(-1)范围处以及1 744cm~(-1)附近处的吸收峰是识别不同产地中国沙棘主要特征峰;比较各产地中国沙棘的二阶导数红外图谱发现,1 030和1 516cm~(-1)的吸收峰能够进一步确认样本中的黄酮类化合物的存在。此外,各样本在1 711和1 476cm~(-1)附近的吸收峰以及1 689~1 515和1 400~1 175cm~(-1)处吸收峰的强度和位置均具有显著差异。一维红外光谱和二阶导数光谱的结合,可以为不同产地中国沙棘的识别分析提供科学数据。该方法快速、直观、简便,能够为不同产地中国沙棘的整体化学成分提供大量信息,有助于中国沙棘的整体质量控制以及有效成分定性分析研究。     

基于波谱技术的茶树生长与茶叶品质信息快速检测研究进展

波谱技术快速获取茶树生长和茶叶品质信息对提高茶叶生产信息化、产业化水平,保障茶叶品质和安全具有重要意义。阐述了波谱技术在茶树生长和茶叶品质信息快速检测的研究进展和发展趋势。重点介绍了红外光谱,荧光光谱、拉曼光谱、质谱等在茶树生长信息获取(氮、叶绿素、病虫害信息等)、茶叶品种分类、茶叶分级、茶叶内部品质检测(茶多酚、儿茶素、咖啡碱、氨基酸、农药残留等)、茶饮料和加工品的品质检测以及相关检测设备等方面的研究进展和应用情况,简述了茶树生长信息获取方法、传感仪器和产业化应用的研究和发展趋势。选择合适的预处理和化学计量学方法能有效增加模型效果,减少冗余数据,为基于波谱技术便携式仪器的开发提供可能。基于波谱技术便携式仪器和在线检测仪器开发仍是今后实现该技术应用和推广的重点。首次介绍了波谱技术在茶叶生产加工领域的应用成果和研究进展,涵盖茶树生长、茶叶加工、茶叶和茶加工品品质安全等多方面内容,并论述波谱技术在茶叶产业应用存在问题和将来发展趋势。