Amperometric multidetection with composite enzyme electrodes

The use of composite biosensors for multianalyte detection strategies is discussed. Graphite–Teflon rigid composite biosensors offer the possibility of coimmobilization of several enzymes by simple physical inclusion in the bulk of the electrode matrix with no covalent linkages. A novel trienzyme graphite–Teflon–glucose oxidase (GOD)–alcohol oxidase (AOD)–peroxidase (HRP)–ferrocene bisosensor yielded amperometric steady-state currents similar to those obtained with graphite–Teflon–GOD–HRP–ferrocene and graphite–Teflon–AOD–HRP–ferrocene electrodes for the same concentration of glucose and ethanol, respectively. The performance of the trienzyme biosensor for multianalyte detection was evaluated with the simultaneous determination of glucose and ethanol after separation by HPLC, in samples of sweet wine. The simultaneous analysis of several analytes in the same sample should imply that, with an adequate dilution, the concentration levels of the analytes can be included within the ranges of linearity of the corresponding calibration plots. The use of two composite biosensors in a parallel configuration, so that different analytes can be simultaneously detected with no need of chromatographic separation, is also discussed. The usefulness of this approach was evaluated by the simultaneous analysis of glucose and ethanol in sweet wine, and of glucose and lactic acid in red wine.     

微柱分离中的激光诱导荧光检测

 激光诱导荧光检测 (LIFD)以其高的灵敏度和选择性而被广泛应用于微柱分离技术中。以检测池为轴线 ,概述了激光诱导荧光检测系统新进展及其应用。引用了 5 2篇文献     

Cyclic Voltammetry in a Perfluorocarbon Emulsion Blood Substitute

Cyclic voltammetry in a perfluorocarbon emulsion based blood substitute (PEBS) was evaluated. The intent was to determine how PEBS affects the voltammetry of four representative electroactive compounds: potassium ferricyanide, ruthenium(II) trisbipyridine (rutris), hydroquinone, and 2,6‐dichloroindophenol (DCIP). Voltammograms in 0–20% PEBS‐Tris buffer mixtures are affected by PEBS, but reasonably well‐defined voltammograms are obtained in as much as 20% v/v. This report also shows that PEBS has only a small effect on amperometric detection of the reaction between DCIP and nicotinamide adenine dinucleotide (NADH), which has importance in clinical homogeneous immunoassays. Results support continued exploration of voltammetry/amperometry for quantitative analysis in this medium.     

Direct determination of the enantiomeric purity of oxyphenonium using chiral HPLC with post-column extraction detection

Summary A method is described for the determination of the enantiomeric purity (enantiomeric excess) of the anticholinergic drug oxyphenonium. The method for this quaternary ammonium compound is based on the direct HPLC analysis with a chiral stationary phase. Two kinds of 1-acid glycoprotein-bonded phases were used.For the detection a post-column extraction with fluorescence detection of the ion-pair counter ion dimethoxyantracene sulphonate was used.     

Simultaneous determination of tetrahydro-β-carbolines and β-carbolines

Summary Reversed-phase ion-pair HPLC with fluorimetric detectors connected in series was studied for the simultaneous determination of two tetrahydro--carbolines and two -carbolines. After additon of internal standards the samples were reacted with fluorescamine, and then subjected to serial extractions to remove their precursor (tryptamine) from the analytical system. This treatment not only suppressed the artefactual formation of tetrahydro--carbolines and -carbolines during analysis, but also effectively purified them. Under optimum conditions, using trifluoroacetic acid as counter ion, all analytes were separated within 14 min and without major interfering peaks. The quantitative ranges were 0.25–80.0 ng mL^–1 for both tetrahydro--carbolines and 0.1–30.0 ng mL^–1 for both -carbolines. Replicate spiking experiments showed that recovery from most of the samples tested was over 90% and the relative standard deviation ranged from 0.7 to 10.4% within and between assays. The proposed method was applicable to various materials such as soy sauce, vinegar, ketchup, tabasco, beer, wine, sake, whisky, brandy, cows' milk, coffee, cocoa, cheese, cigarette smoke and urine.     

Comparison of combustion sources for sulfur chemiluminescence detection

Three different types of SCD combustion source have been evaluated for use in the chromatographic analysis of atmospheric sulfur compounds. The conventional FID source and the newer inverted burner source were found to be less sensitive and less stable than the flameless design. Overall, the flameless source was superior for use with HRGC-SCD.     

Determination of acidic chlorinated pesticides in water: Comparison of official EPA method 515.1 and liquid-solid extraction HPLC/UV and HPLC/PBMS analyses

Summary A comparison of the official EPA method 515.1 for determination of chlorinated acidic pesticides and a modification of it is illustrated. Extraction of the analytes from water and their determination and quantitation is by gas chromatography-electron capture detection (GC-ECD), liquid chromatography-UV detection and liquid chromatography-particle beam mass spectrometry. Although HPLC-PBMS was found to be less sensitive than the GC-ECD method, it was, nevertheless, more sensitive than HPLC-UV. The modified method is simpler, quicker and allows more accurate determination of pesticides in aqueous samples.Deceased July 31, 1996     

Determination of chromium(III) in water by solid-phase microextraction with a polyimide-coated fiber and gas chromatography-flame photometric detection

A method for the determination of trace Cr(III) in aqueous solution by solid-phase microextraction (SPME) coupled with gas chromatography (GC)-flame photometric detection (FPD) was developed. Aqueous Cr(III) was first converted to the volatile chromium trifluoroacetylacetonate (Cr(tfa)3) by derivatization with 1,1,1-trifluoroacetylacetone (Htfa), followed by SPME extraction using a polyimide-coated silica fiber. The distribution constants (K) of derivatized cis- and trans-Cr(tfa)3 between the polyimide phase and aqueous phase were 2012 and 2214, respectively. The two Cr(tfa)3 isomers extracted can be efficiently separated by a DB-210 GC column within 9 min. Selective detection of Cr was performed by a FPD equipped with a 385-nm long-pass filter. Linearity (r> 0.99) over the concentration range 5-300 ng ml(-1) Cr was obtained and the limit of detection was 2 ng ml(-1) Cr. The relative standard deviation was 7% at 10 ng ml(-1) Cr (n = 5). Applicability of this method to water analysis was tested by analyzing the chromium content in a reference standard water sample and an industrial effluent.     

A common method for the determination of several calcium channel blockers using an HPLC system with ultraviolet detection

We report a common HPLC method for the single or simultaneous determination of four calcium channel blockers (CCB), namely diltiazem (DTZ), verapamil (VER), nifedipine (NIF) and nitrendipine (NIT) and their active metabolites demetildiltiazem and deacetildiltiazem (MA and M1), norverapamil (NOR), and dehydronifedipine (DHN). DHN was first synthesised in our laboratory and different pH values of the mobil phase were subsequently prepared and tested for chromatographic separation. The detection system and the environmental light conditions were optimised. The best separations of all analytes were obtained using a C₁₈ column and a mobile phase of methanol, 0.04 M ammonium acetate, acetonitrile and triethylamine (2:2:1:0.04 v/v). Quantitation was performed using imipramine (IMI) as the internal standard. For DTZ and its metabolites (M1 and MA), the wavelength chosen was 237 nm; for VER and its metabolite NOR, it was 210 nm; and, finally for NIF and its metabolite DHN and NIT it was 216 nm. When a simultaneous analysis was carried out the wavelength was of 230 nm. The optimum pH were 7.90 and 7.10 when the separation of NIT and DTZ or VER and NIF were carried out, respectively, and 7.90 when a simultaneous separation was carried out. The detection limit of the assay was less than 8 ng ml⁻¹ for all compounds, with coefficients of variation less than 7% (for inter- and intra-day) over the concentration range of 1–1000 ng ml⁻¹. The retention times were less than 11 min. When NIF or NIT were studied, it was necessary to use a sodium vapour lamp in order to avoid the photodegradation which takes place under daylight conditions.     

Determination of weak (2.0–2.5) dissociation constants of non-UV absorbing solutes by capillary electrophoresis

Summary Capillary electrophoresis (CE) has proved to be a fast and convenient method for the determination of the dissociation constants of non-UV absorbing solutes in the acidic pK _A range (2.0–2.5). The electroosmotic flow was reversed by washing the capillary with 0.2% polybren aqueous solution. A series of background electrolytes was prepared with phenylphosphonic acid (pK _A=1.29) and β-alanine (pK _A=3.55) with the same ionic strength and a high buffer capacity in order to improve the repeatability (0.1–0.2 %) of the electrophoretic mobility and to determine the values of pK _A accurately. This procedure was applied to the determination of the dissociation constants of several alkyl-alkylphosphonic acids whose pK _A values have not yet been published in the literature. In this work, their dissociation constants have been found to vary between 1.91 and 2.34 for alkyl-methylphosphonic acids and between 2.10 and 2.38 for alkyl-ethylphosphonic acids.