0.74Pb(Mg_(1/3)Nb_(2/3))O_3-0.26PbTiO_3薄膜的光学性能研究

采用磁控溅射法,选用LaNiO3(LNO)作为缓冲层和电极层,在硅基片上成功地制备出了0.74Pb(Mg1/3Nb2/3)O3-0.26PbTiO3(PMN-0.26PT)铁电薄膜.X射线衍射(XRD)分析表明薄膜具有沿(110)方向择优取向的钙钛矿结构.利用NKD光谱测试仪测试了薄膜的反射谱,并使用最小二乘法进行拟合分析得到其折射率和消光系数.在沉积温度为500℃时,薄膜具有更为均匀和致密的微观结构.在波长为633 nm时,该薄膜的折射率大小为2.41.薄膜的折射率和消光系数随着光子能量的增加而增加.薄膜的这些光学特性使其有望在低压电光转换器、光波导等器件中应用.     

6LoWPAN子网接入(IPv4)Internet的研究与实现

Internet用户借助无线传感网络(WSN)有效控制周围的物理世界已成为前沿热点问题.提出基于6LoWPAN技术的WSN接入(IPv4)Internet的方法,融合网络地址-协议转换技术,6LoWPAN网络边缘路由器集成了以太网路由,实现6LoWPAN与(IPv4)Internet之间的数据包转换.测试分析得出,本文方法改善了接收率和网络时延,并使两异构网之间在网络层面上实现了统一,促进网络的无缝融合;使异构网节点在业务层面上达到了直接的端到端交互,拓展业务的延伸.     

PT二次回路压降自适应补偿方法研究

通过分析电压互感器二次回路的特点及其压降产生的原因，设计了电压互感器二次回路压降自适应补偿控制器，为提高电能计量准确度、减小由于计量误差造成的电量损失提出了一种新的思路。     

一种机器人遥控信号译码算法的研究

在机器人应用领域,无线遥控机器人具有独特的优势.PT2272/2262作为射频信号的收发芯片,有着使用方便,价格便宜等优点,在遥控领域得到了广泛使用.本文在分析该芯片信号特点的基础上,提出了一种信号译码方法,设计了相应的算法,并在具体的机器人控制系统中得到了实现.     

Crystal growth,dielectric and FIR reflectivity studies on PZN(0.91)‐PT(0.09) single crystals

Crystal growth of PZN‐PT single crystals using slow cooling flux technique with PbO flux is reported in this communication. Optimum growth conditions to maximize the amount of perovskite are also suggested. The grown crystals are characterized by dielectric and FIR spectroscopy. Temperature dependence of ε′ very close to the transition temperature shows a first order phase transition. Diffused phase transition and strong frequency dependence of ε′ around transition temperature are also observed. The real part of ε′ was found to obey the relation ε′ – ε_∞ = χ′(T‐T_o)². Dispersion in the ferroelectric phase is suggested to originate from ordering of domains. Competition in the B‐site occupancy by Zn, Nb and Ti ions is suggested to be the origin for the additional modes in the FIR reflectivity at room temperature. (© 2005 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Optimal media planning for multi-products in segmented market

Promotion is an essential stage of any product life cycle. All firms either concerned with single or multiple products promote their products. Advertising is the most dominated form of promotion for most of the products. Our research focuses on firms which produces a multiple range of products and advertise them using available media options. The budget constraint forms the major restriction. The existing research in media allocation of multiple products ignores the market segmentation and formulates the media plan assuming all segments alike. In this paper we formulate a media planning problem for allocating the available budget in multiple media that are found suitable for the advertising of multiple products considering marketing segmentation aspect of advertising. The objective is to maximize the total reach in all the segments. Goal programming technique is used to solve the problem. A case study is presented to show the real life application of the model.     

Proficiency testing scheme for the harmonization and comparability of analytical measurements

According to the experience of the successful implementation of proficiency tests (PT) by using the certified reference value as the assigned value, a new scheme of evaluation is presented by suggesting the use of the uncertainty associated with the certified value. The technical performance of laboratories is evaluated by the parameter quadratic mean error (QME), which is the square root of the sum of the square of the bias and that of the standard deviation of the laboratory. This parameter is considered as the estimate of the measurement uncertainty of the laboratory and is compared to the uncertainty (U) associated with the certified value provided by an NMI. Considering that the calibration and measurement capability, known as the CMC, is recognized among NMIs, the ratio QME/U enables us to compare the PT relative to the CMC of an NMI, and, consequently, to any other comparison results based on the CMC of signatories of the mutual recognition arrangement (MRA) of the International Committee of Weights and Measure (CIPM). Presented at BERM-11, October 2007, Tsukuba, Japan.     

泛系哲学与泛系数学和应用:事理,物理,技理,医理与战理(Ⅱ)

这里从泛系观引入一种新型的哲学与数学研究,包括在泛系框架下发展哲学七论与数学和一些第二第三哲学以及对事理、物理、技理、医理与战理的某些应用.     

高精度温度控制系统的研究

设计并实现了一种基于自动优化的PID算法控制技术和16位单片机(SCM)SPCE061A的高精度水温控制系统.由传感器PT_1000和16位AD LTC1606获取温度信号,使用U'nsp IDE环境提供的API函数进行控制程序设计,通过SPCE061A实现温度实时控制.实验结果表明该系统可实时精密的控制水温,且稳定迅速、操作简单并能语音播报和显示温度值.可广泛应用于工业、农业、食品等部门的温度控制部分.     

Determination of marker pteridins and biopterin reduced forms, tetrahydrobiopterin and dihydrobiopterin, in human urine, using a post-column photoinduced fluorescence liquid chromatographic derivatization method

A liquid chromatographic method for the simultaneous analysis of marker pteridins and biopterin reduced forms, in urine samples is proposed. A Zorbax Eclipse XDB-C18 column was used for the chromatographic separation, using a 98/2 (v/v), citrate buffer (pH 5.5)-acetonitrile mobile phase, in isocratic mode. A post-column photoderivatization was carried out with an on-line photoreactor, located between a diode array detector (DAD) and a fast scanning fluorescence detector (FSFD). Neopterin (NEO), biopterin (BIO), pterin (PT) and dihydrobiopterin (BH2) were determined by measuring native fluorescence, using the photoreactor in OFF-mode, and tetrahydrobiopterin (BH4) was determined by measuring of the induced fluorescence of the generated photoproducts, using the photoreactor in ON-mode. In addition, Creatinine (CREA), as a reference of metabolites excrection in urine, was simultaneously determined using the DAD detector. Detection limits were 0.2, 13.0, 0.3, 0.3 and 3.5 ng mL⁻¹, for NEO, BH2, BIO, PT and BH4, respectively, and 0.4 μg mL⁻¹ for CREA. Ratio values for NEO/CREA, PT/CREA, BH4/CREA, BH2/CREA, NEO/BIO and BIO_total/CREA, in urine samples, of healthy children and adults, phenylketonuric children and infected mononucleosis children, are reported. A comparative study, about the mean values obtained for each of the compounds, by the present procedure and by the classical iodine oxidation method (Fukushimás method), has been performed, in urine samples belonging to healthy volunteers. The values obtained were BH4/CREA: 0.41, BH2/CREA: 0.31 and BIO_total/CREA: 0.73, by the proposed method, and BH4/CREA: 0.35, BH2/CREA: 0.20 and BIO_total/CREA: 0.48, by iodine oxidation method.