PAMAM树状大分子对酮基布洛芬溶解度的影响

以酮洛芬为模型药物,研究聚酰胺-胺(PAMAM)树状大分子对酮洛芬的增溶作用,并探讨其作用机理.采用紫外光谱法测定了G1.0、G1.5、G2.0、G2.5、G3.0、G3.5PAMAM在不同浓度和不同pH时对酮洛芬的增溶量.并运用计算机模拟方法对PAMAM与酮洛芬相互作用的机理进行了探讨.实验结果表明,酮洛芬的溶解度随溶液pH值变化而变化,在pH4.0～6.0范围内,PAMAM树状大分子对酮洛芬的增溶量随着PAMAM的代数、浓度和溶液pH的增加而增大.整代和半代都具有增溶作用.然而,在同一pH条件下,对于具有相同官能团数目的整代和半代,整代增溶效果要高于半代.计算机模拟结果表明PAMAM与酮洛芬主要靠静电作用力结合.增溶机理可能是酮洛芬的羧基与PAMAM的伯胺和叔胺发生静电作用.     

树枝状聚酰胺胺负载TEMPO的合成及其催化分子氧氧化醇的性能

以乙二胺和丙烯酸甲酯为原料,经过重复Michael和酯氨解反应,制备出二代(2.0 G)树枝状聚酰胺胺(PAMAM).PAMAM与2,2,6,6-四甲基哌啶酮氮氧自由基经缩合、还原将PAMAM与2,2,6,6-四甲基哌啶氮氧自由基(TEMPO)键连,得到PAMAM负载的TEMPO(PAMAM-TEMPO).采用1H NMR、13C NMR以及FT-IR等手段对中间体及最终产物进行了表征.将PAMAM-TEMPO与CuBr2以及2,2-联吡啶结合构成催化体系,用于分子氧为氧化剂的醇的选择性氧化反应,结果表明该体系对苄基以及烯丙基伯醇的氧化显示出良好的催化活性和选择性.结果还证明,TEMPO的负载使氧化产物醛很容易与催化体系分离,而且催化剂可以循环使用.     

A Review of Surface Functionalized Amine Terminated Dendrimers for Application in Biological and Molecular Sensing

Dendrimers are three dimensional nanosized synthetic molecules that have internal cavities and numerous surface groups. In recent times they have received increased attention in sensing applications. For dendrimers to be used as sensors, they most commonly require functionalization at their surface. This is because the surface is generally the first point of contact between the dendrimer and the outside world, hence surface functionalization serves to selectively home in on the target analyte. Further, sensor signals may be transmitted through surface functionalities e.g. fluorochromic molecules. It is therefore important to document surface functionalization approaches. Dendrimers with amine surface groups have the advantage of being able to be conjugated to other molecules via an amide linkage, which is one of the most fundamental and widespread chemical bonds in nature. In this paper we demonstrate the properties of dendrimers that make them so applicable to sensing. We review several methods for functionalizing dendrimers via an amide linkage, as well as present a review of surface functionalized polyamidoamine, polyamine, and polypeptide dendrimers that have been employed for biological, chemical and molecular sensing.     

Silver Nanostructures on Graphene Oxide as the Substrate for Surface-Enhanced Raman Scattering (SERS)

Nanosized surface-enhanced Raman scattering (SERS) substrates fabricated by the controlled growth of metal nanostructures on water-dispersed two-dimensional nanomaterials can open a new avenue for SERS analysis of liquid samples in biological fields. In this work, regular and uniform Ag nanostructures were grown on the surface of graphene oxide (GO) through a microwave-assisted hydrothermal method. Polyamidoamine (PAMAM) dendrimers were assembled on the surface of GO to form GO/PAMAM templates for growing Ag nanostructures, which are primarily comprised of Ag dimers and trimers. The prepared Ag/GO nanocomposites are highly dispersed and stable in aqueous solution and may be used as substrates for enhanced Raman detection of rhodamine 6?G (R6G) in aqueous solution. This special substrate provides high-performance SERS and suppresses R6G fluorescence in aqueous solution and is promising as a nanosized material for the enhanced Raman detection of liquid samples in biological diagnostics.     

Investigation on nonisothermal crystallization kinetics of the high‐flow nylon 6 by differential scanning calorimetry

The crystallization kinetics of the high‐flow nylon 6 containing polyamidoamine (PAMAM) dendrimers units in nylon 6 matrix was investigated by differential scanning calorimetry. The Ozawa and Mo equations were used to describe the crystallization kinetics under nonisothermal condition. The values of Avrami exponent m and the cooling crystallization function F(T) were determined from the Ozawa plots, which showed bad linearity, and were divided into three sections depending on different cooling rates. The plots of the m and log F(T) values versus crystallization temperatures were obtained, which indicated that the actual crystallization mechanisms might change with the crystallization temperatures. The high‐flow nylon 6 has higher values of m and log F(T) than those of pure nylon 6, which implied that the high‐flow nylon 6 had more complicated crystallization mechanisms and slower crystallization rate than those of pure nylon 6. The good linearity of the Mo plots verified the success of this combined approach. The activation energies of the high‐flow nylon 6 ranged from 157 to 174 kJ/mol, which were determined by the Kissinger method. The ΔE values were lower than those of pure nylon 6, and the ΔE values were affected by both the generation and the content of PAMAM units in the nylon 6 matrix. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2201–2211, 2008     

Polyamido amine dendrimers functionalized with poly(phenylenevinylene) dendrons at their periphery

A series of polyamido amine (PAMAM) dendrimers (Generations 2, 3, 4, and 6) fully functionalized at their periphery with first‐ and second‐generation poly (phenylenevinylene) (PPV) dendrons have been efficiently prepared. MALDI‐TOF mass spectrometry proved to be particularly useful for the characterization of the new hybrid dendrimers as well as for the estimation of the average number of PPV dendrons attached to the surface. The optical absorption and emission properties of these systems were studied. The materials display extremely high molar extinction coefficients and emit blue light with only slightly lower fluorescence quantum yields than the corresponding free dendrons. Self‐quenching interactions between PPV units were not observed in THF. However, the luminescence properties underwent a dramatic change when toluene was used as the solvent. The lower polarity of toluene caused shrinkage of the PAMAM structure and brought the PPV chromophores closer together, leading to self‐quenching interactions and excimer formation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6409–6419, 2009     

Preparation of planar‐chiral multidonor phosphanylferrocene carboxamides and their application as ligands for palladium‐catalysed asymmetric allylic alkylation

Amide coupling of (S_p)‐2‐(diphenylphosphanyl)ferrocene‐1‐carboxylic acid with appropriate terminal amines mediated by 1‐hydroxybenzotriazole and a carbodiimide affords multi‐donor amides terminally functionalized with planar‐chiral (S_p)‐2‐(diphenylphosphanyl)ferrocen‐1‐yl moieties in good to excellent yields. Palladium catalysts based on these ligands efficiently promote asymmetric allylic alkylation of 1,3‐diphenylallyl acetate with in situ generated dimethyl malonate anion to give the C‐alkylated product with ees up to 93% at room temperature. Copyright © 2010 John Wiley & Sons, Ltd.     

Photoresponsive nanocarriers based on PAMAM dendrimers with a o‐nitrobenzyl shell

Gn (n = 3, 4, and 5) poly(amidoamine) (PAMAM) dendrimers were synthesized and peripherally modified with photocleavable o‐nitrobenzyl (NB) groups by reacting o‐nitrobenzaldehyde with the terminal amine groups of PAMAM dendrimers, followed by reducing the imine to amine groups with NaBH₄. The NB‐modified dendrimers, Gn‐NB (n = 3, 4, and 5), were characterized by nuclear magnetic resonance and fourier transform infrared spectroscopy. The results showed that the NB groups were successfully attached on the periphery of the dendrimers with near 100% grafting efficiency. Such a photosensitive NB shell could be cut off on irradiation with 365 nm ultraviolet (UV) light. The encapsulation and release of guest molecules, that is, salicylic acid (SA) and adriamycin (ADR), by Gn‐NB were explored. The encapsulation capability of these dendrimers was found to increase as the guest molecular size was decreased and have dependence on the generation of dendrimers as well. For both of SA and ADR, the average encapsulation numbers per dendrimer decreased in the order of G4‐NB > G5‐NB > G3‐NB, indicating that the fourth generation dendrimer was a better container for the guest molecules. The rate of SA release was found to be greater with UV irradiation than that without, suggesting that the NB‐shelled PAMMAM dendrimers could function as a molecular container/box with photoresponsive characteristics. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 551–557, 2010     

Solid‐Phase Synthesis of a Seventh‐Generation Inverse Poly(amidoamine) Dendrimer: Importance of the Loading Ratio on the Resin

Here, this study overcomes the current barriers to efficient solid‐phase synthesis of high‐generation dendrimers by decreasing the loading ratio on the resin. G7 inverse poly(amidoamine) dendrimer is now prepared, for the first time, through a solid‐phase synthesis using only 50% of the available reactive sites and by choosing a large resin. This preparation takes only 15 d to afford highly pure product in 80% yield with precipitation being the only purification procedure used. The results clearly show the amount of the initial monomer loaded on the resin to be a vital factor for the ability to use solid‐phase synthesis to produce large dendrimers. This finding also sets stage for the applications of solid‐phase synthesis for the preparation of other macromolecules.

     

Copper-free click conjugation of methotrexate to a PAMAM dendrimer platform

The synthesis of a generation 5 (G5) poly(amidoamine) (PAMAM) dendrimer platform having cyclooctyne ligands that were subsequently be used for a copper-free Huisgen 1,3-dipolar cycloaddition (click reaction) with azido modified methotrexate is described. The G5 PAMAM dendrimer was first partially (70%) acetylated and then coupled with 20 cyclooctyne ligands through amide bonds. The remaining primary amine groups on the dendrimer surface were neutralized by acetylation. The platform was then ‘clicked’ with different numbers (5, 10, and 17) of γ-azido functionalized methotrexate. The copper-free click reactions were stoichiometric with excellent yields.