基于线性元的电阻抗成像的数学模型和算法

本文讨论了电阻抗成像的数学模型，先利用有限元方法将其离散化，再把它转化为非线性优化问题，并给出了利用牛顿法求解这一问题的具体算法．最后进行了一系列数值仿真对比实验，证实了这一算法的有效性，指出了其中存在的问题．     

Finite element computations of two-dimensional arterial flow in the presence of a transverse magnetic field

A finite element solution of the Navier-Stokes equations for steady flow under the magnetic effect through a double-branched two-dimensional section of a three-dimensional model of the canine aorta is discussed. The numerical scheme involves transforming the physical co-ordinates to a curvilinear boundary-fitted co-ordinate system. The shear stress at the wall is calculated for a Reynolds number of 1000 with the branch-to-main aortic flow rate ratio as a parameter. The results are compared with earlier works involving experimental data and found to be in reasonable qualitative agreement. The steady flow, shear stress and branch flow under the effect of a magnetic field have been discussed in detail.     

开关型磁阻电动机的振动分析

针对SR电动机存在的振动和噪声问题,分别应用实验模态分析法和计算模态分析法研究了SR电动机的动力特性,得到了SR电动机定子的固有频率和主振型,计算值与实验测量值吻合较好,所得数据可为制定抑制SR电动机的振动和噪声方案提供参考.     

贵县式三水铝土矿微量元素地球化学特征及其意义

本文应用微量元素地球化学理论,通过研究区内地层、红土剖面及矿物相中微量元素含量分配特点,结合野外观察结果,得出了本区三水铝土矿的成矿源岩是郁江组地层的结论,为本区找矿提供了新的线索。     

论体育教师的业务能力构成

作者根据体育教育专业学生在教育实习中常见的一些不足，提出了素质教育环境中体育教师应具备：课前规划能力、语言表达能力、形体表现能力、课堂控制能力、竞赛组织能力及课后归结能力等六个相互联系的基本业务能力的观点。     

Superconvergence of discontinuous Galerkin finite element method for the stationary Navier‐Stokes equations

This article focuses on discontinuous Galerkin method for the two‐ or three‐dimensional stationary incompressible Navier‐Stokes equations. The velocity field is approximated by discontinuous locally solenoidal finite element, and the pressure is approximated by the standard conforming finite element. Then, superconvergence of nonconforming finite element approximations is applied by using least‐squares surface fitting for the stationary Navier‐Stokes equations. The method ameliorates the two noticeable disadvantages about the given finite element pair. Finally, the superconvergence result is provided under some regular assumptions. © 2006 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq 23: 421–436, 2007     

Assessment of thermal expansion coefficient of methylsilsesquioxane thin film

For the methylsilsesquioxane film whose optical birefringence is almost zero, it was recently reported that its vertical thermal expansion coefficient (CTE) was approximately one order of magnitude larger than the lateral CTE. Though the birefringence is not an absolute predictor of anisotropic behavior, the discrepancy in both the CTEs was so remarkable that it was essential to investigate whether the anisotropy was intrinsic property or not. If the effect of Poisson's ratio is considered in the calculation of the vertical CTE and when elastic modulus measured by surface acoustic wave spectroscopy is used in the assessment of the lateral CTE, both the CTEs are coincident with each other. Therefore, it can be concluded that the discrepancy in the CTEs can be attributed to a higher in‐plane polymer chain orientation but it can also arise from the misleadingly assumed modulus and Poisson's ratio. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3109–3120, 2006     

利用单元状态的改变模拟采场破坏规律

采用能较好反映混凝土等脆性材料破坏特征的五参数Wilianm-Warnke强度准则破坏模型，利用有限单元法单元“处死”的功能模拟回采过程和相似材料模拟试验研究，初步总结出缓倾斜厚煤层悬移支架放顶煤顶板活动及矿压显现规律，为缓倾斜厚煤层悬移支架放顶煤制定较为合理的方案、安全技术措施等提供重要的依据和指导作用。     

在线固溶条件下的输出辊道受热分析

为满足300系列奥氏体不锈钢轧后在线目溶处理的要求，针对某厂已有设备条件，进行在线固溶处理输出辊道的改造，利用ANSYS有限元分析软件，通过对不同结构和材质条件下输出辊道的受热分析，为输出辊道的改造提供了理论依据。结果表明，将原有的铸铁辊道改为陶瓷辊道能够满足生产的要求。     

一种数字图像的快速并行算法

利用Foufier一阶光滑离散化的分析，提出了对图像增强进行并行化处理，在同等存贮环境中，并行算法优于串行算法，从而为图形并行处理提出了一种快速方法。