Open channel turbulent flow over hemispherical ribs

This paper reports an experimental investigation of open channel turbulent flow over hemispherical ribs. A row of ribs consists of hemispheres closely placed to one another in the spanwise direction and cover the entire span of the channel. The pitch-to-height ratio is varied to achieve the so-called d-type, intermediate and k-type roughness. The Reynolds numbers based on water depth, h, and momentum thickness, θ, of the approach flow are respectively, Re_h = 28,100 and Re_θ = 1800. A particle image velocimetry is used to obtain detailed velocity measurements in and above the cavity. Streamlines, mean velocity and time-averaged turbulent statistics are used to study the effects of pitch-to-height ratio on the flow characteristics and also to document similarities and differences between the present work and prior studies over two-dimensional transverse rods. It was observed that interaction between the outer flow and the shear layers generated by ribs is strongest for k-type and least for d-type ribs. The results also show that hemispherical ribs are less effective in augmenting flow resistance compared to two-dimensional transverse ribs. The levels of the Reynolds stresses and budget terms increase with increasing pitch-to-height ratio inside the roughness sublayer.     

矿山层状反倾边坡岩体移动规律的试验研究

本文基于现代工程地质力学理论与相似模拟原理, 采用地质力学模拟试验方法, 以某矿顶帮边坡为工程实例, 结合大量滑坡实例综合分析, 研究了层状反倾边坡岩体随采矿工程发展的移动规律和潜在滑坡模式。     

A non-linear model for the dynamics of open cross-section thin-walled beams—Part I: formulation

A non-linear one-dimensional model of inextensional, shear undeformable, thin-walled beam with an open cross-section is developed. Non-linear in-plane and out-of-plane warping and torsional elongation effects are included in the model. By using the Vlasov kinematical hypotheses, together with the assumption that the cross-section is undeformable in its own plane, the non-linear warping is described in terms of the flexural and torsional curvatures. Due to the internal constraints, the displacement field depends on three components only, two transversal translations of the shear center and the torsional rotation. Three non-linear differential equations of motion up to the third order are derived using the Hamilton principle. Taking into account the order of magnitude of the various terms, the equations are simplified and the importance of each contribution is discussed. The effect of symmetry properties is also outlined. Finally, a discrete form of the equations is given, which is used in Part II to study dynamic coupling phenomena in conditions of internal resonance.     

Modeling and prediction of bulk properties of open-cell carbon foam

The emerging ultralightweight material, carbon foam, was modeled with three-dimensional microstructures to develop a basic understanding in correlating microstructural configuration with bulk performance of open-cell foam materials. Because of the randomness and complexity of the microstructure of the carbon foam, representative cell ligaments were first characterized in detail at the microstructural level. The salient microstructural characteristics (or properties) were then correlated with the bulk properties through the present model. In order to implement the varying anisotropic nature of material properties in the foam ligaments, we made an attempt to use a finite element method to implement such variation along the ligaments as well as at a nodal point where the ligaments meet. The model was expected to provide a basis for establishing a process-property relationship and optimizing foam properties.The present model yielded a fairly reasonable prediction of the effective bulk properties of the foams. We observed that the effective elastic properties of the foams were dominated by the bending mode associated with shear deformation. The effective Young's modulus of the foam was strongly influenced by the ligament moduli, but was not influenced by the ligament Poisson's ratio. The effective Poisson's ratio of the foam was practically independent of the ligament Young's modulus, but dependent on the ligament Poisson's ratio. The effective Young's modulus of the carbon foam was dependent more on the transverse Young's modulus and the shear moduli of the foam ligaments, but less significantly on the ligament longitudinal Young's modulus. A parametric study indicated that the effective Young's modulus was significantly improved by increasing the solid modulus in the middle of the foam ligaments, but nearly invariant with that at the nodal point where the ligaments meet. Therefore, appropriate processing schemes toward improving the transverse and shear properties of the foam ligaments in the middle section of the ligaments rather than at the nodal points are highly desirable for enhancing the bulk moduli of the carbon foam.     

Analysis of phospholipids using an open‐tubular capillary column with a monolithic layer of molecularly imprinted polymer in capillary electrochromatography‐electrospray ionization‐tandem mass spectrometry

In this study, an open‐tubular capillary electrochromatography (OT‐CEC) column with a monolithic layer of molecularly imprinted polymer (MIP) based on methacrylic acid, ethylene glycol dimethacrylate, and 4‐styrenesulfonic acid was utilized for the simultaneous separation and characterization of phospholipid (PL) molecular structures by interfacing with electrospray ionization‐tandem mass spectrometry (ESI‐MS‐MS). Introducing an MIP‐based monolith along with charged species at the OT column made it possible to separate PL molecules based on differences in head groups and acyl chain lengths in CEC. For the interface of OT‐CEC with ESI‐MS‐MS, a simple nanospray interface utilizing a sheath flow was developed and the resulting OT‐CEC‐ESI‐MS‐MS was able to separate PL standards (phosphatidylserines, phosphatidylethanolamines, phosphatidylglycerols, phosphatidic acid, and lysophosphatidylglycerols). The developed method was applied to human urinary lipid extracts, and resulted in the separation and structural identification of 18 molecules by data‐dependent collision‐induced dissociation.     

Divergence points of self-similar measures satisfying the OSC

Recently, Barreira and Schmeling (2000) [1] and Chen and Xiong (1999) [2] have shown, that for self-similar measures satisfying the SSC the set of divergence points typically has the same Hausdorff dimension as the support K. It is natural to ask whether we obtain a similar result for self-similar measures satisfying the OSC. However, with only the OSC satisfied, we cannot do most of the work on a symbolic space and then transfer the results to the subsets of Rd, which makes things more difficult. In this paper, by the box-counting principle we show that the set of divergence points has still the same Hausdorff dimension as the support K for self-similar measures satisfying the OSC.     

The periodic traveling-wave solutions of the short-pulse equation

In this paper, we consider the short-pulse equation (SPE) by using the dynamical system theory. The periodic solutions of the SPE are investigated. The solutions are characterized by two parameters. The periodic waves existent conditions are found, and explicit parametric expressions of all periodic solutions are given.     

Determination of open boundary conditions for computational fluid dynamics (CFD) from interior observations

An optimization approach for the determination of open boundary conditions for Computational Fluid Dynamics is introduced, whereas the error between the solution σ and interior observations ω is minimized. The numerical weather prediction (NWP) model ALADIN–Austria provides data of wind speed and wind direction at virtual weather stations within the area of interest. Also, data from real weather stations and other sources can be incorporated into the model, respectively. In this work, the optimization method is applied to the constant density Navier–Stokes Equations. Thereby, for stabilizing the ill-posed pseudo inverse problem several regularization methods are reviewed. Further, numerical studies are carried out to identify the supreme regularization method for the presented application. Finally, the algorithm is applied to the micro- and meso-scale flow over the Grimming mountain, Austria. The results are compared with real weather station data and show suitable correlation with the measurements.     

A new target for synthesis of sandwiched beryllium, magnesium, and calcium dimers: C5H7-M-M-C5H7 and C4H4P-M-M-C4H4P

Group 2 bis-element sandwiches formed by homoleptic open sandwiches with formula C₅H₇-M-M-C₅H₇ and C₄H₄P-M-M-C₄H₄P (M = Be, Mg, and Ca) have been studied at the B3LYP/cc-PVDZ and BP86/6-311G(d,p) levels of theory. The predicted M-M bond distances are much shorter than in the equivalent isolated M-M dimer and indicate substantial Be-Be, Mg-Mg, and Ca-Ca bonding. An NBO analysis shows that each M-M unit contains a single covalent bond and that the unit is linked to the open pentadienyl and phospholyl ring via ionic bonds. We thus predict that these new compounds are viable synthetic targets.     

Numerical study on magneto-convection of cold water in an open cavity with variable fluid properties

The aim of the present study is to understand the problem of buoyancy and thermocapillary induced convection of cold water near its density maximum in an open cavity with temperature dependent properties in the presence of uniform external magnetic field. The governing equations are solved by the finite volume method. The results are discussed for various values of reference temperature parameter, density inversion parameter, Rayleigh, Hartmann and Marangoni numbers. It is observed that the temperature of maximum density leaves strong effects on fluid flow and heat transfer due to the formation of bi-cellular structure. Convection heat transfer is enhanced by thermocapillary force when buoyancy force is weakened.