Efficient synthesis of p-bis-(chlorodifluoromethyl)benzene

Selective, high yield partial fluorination of p-bis-(trichloromethyl)benzene to p-bis-(chlorodifluoromethyl)benzene has been accomplished by warming a slurry of the p-bis-(trichloromethyl)benzene in anhydrous HF which also contains a small quantity of inert solvent, such as 1,2-dichloroethane.     

A novel method of the determination of boron in the presence of a little methanol by discoloring spectrophotometry in pharmaceutical and biological samples

It is the first time that boron is determined in the presence of a little methanol by discoloring spectrophotometry in this paper. A russety product can be formed by the reaction between glycine (Gly) and sodium 1,2-naphthoquinone-4-sulfonate (NQS) in alkaline solution. When boron is added to the solution, the system will be discolored, and the addition of a little methanol will improve the discoloration. Beer's law is obeyed in the range of boron concentrations of 0.86-43.24 μg ml⁻¹ at the maximal discoloring wavelength of 382 nm. The equation of linear regression is A = −0.07581-86.79186C (mol l⁻¹), with a linearly correlation coefficient of 0.9979. The detection limit is 0.80 μg ml⁻¹ and R.S.D. is 4.2%. The method is successfully applied to the determination of boron in pharmaceutical and biological samples. The average recoveries are in the range of 98.2-104.1%. Analytical results obtained with this novel method are satisfactory.     

3-氨基环己基甲酸和cis-3-氨基环己烯基-5-甲酸立体异构体的合成

通过手性胺拆分方法，从3-环己烯基甲酸出发分别合成得到了3-氨基环己基甲酸（ACHC）的四个立体异构体，以及cis-5-氨基-3-环己烯基甲酸（ACHEC）的二个立体异构体。     

INTROMISSION OF WATER-REPELLENT AND HYDROSCOPIC PROPERTIES SIMULTANEOUSLY TO PP BY PLASMA DISCHARGE METHOD

Plasma-induced surface graft copolymerization of acrylic acid on polypropylene non-woven fabric (PP-g-AA) and polypropylene membrane were reported. The extents of grafting were controlled by the plasma and polymerization condition. Hexadecyltrimethyl ammonium bromide was then coupled with the carboxyl group of PP-g-AA to obtain a polyion complex (PIC). At last, CF4 plasma was used to give PICs hydrophobic property. The moisture regain and water-repellency of the processed PICs was investigated. The surfaces were characterized using ATR FT-IR and XPS. The result indicates that the products have very high ability to adsorb moisture, even better than cotton fiber. At the same time, the products show excellent hydrophobic property, which can‘t be wetted by those reagents whose surface tensions were higher than 327mN/m.     

功能化离子液体中Ag纳米微粒的制备及摩擦学性能研究

合成了1-甲基-3-羟乙基咪唑四氟硼酸盐离子液体([C₂OHmim]BF₄)，用红外光谱表征了其结构。以所合成的离子液体作为还原剂、稳定剂与反应介质制备了Ag纳米微粒，用XRD和TEM对微粒的结构和形貌进行了表征。在四球摩擦磨损实验机上研究了[C₂OHmim]BF₄离子液体及掺入Ag纳米微粒后的离子液体的摩擦学性能。掺入银纳米微粒后，离子液体在高载荷下的润滑性有了大幅的改善。用SEM和XPS分别对磨痕表面的形貌和元素组成、化学状态进行了分析，结果表明：在低、高载荷分别起润滑作用的是有机膜和金属-有机复合膜。     

3,5-diBr-DMPAP直接光度法测定葡萄糖酸锌含量

为建立一种快速、简便、灵敏测定葡萄糖酸锌含量的方法,在非离子型表面活性剂聚氧乙烯异辛基苯基醚(TritonX-100)存在下,用2-(3,5-二溴-2-吡啶偶氮)-5-二甲氨基酚(3,5-diBr-DM-PAP)作显色剂,直接光度法测定了葡萄糖酸锌。结果表明,该法显色络合物最大吸收波长为560 nm,线性范围为0~1.5μg.mL-1,表观摩尔吸光系数为1.10×105L.mol-1.cm-1,回收率为98.7%~102.2%,具有操作快速、简便,结果灵敏可靠等优点,应用该法直接测定补锌口服液葡萄糖酸锌含量,结果满意。     

Crystal Structure and Biological Activities of （R）-N′-[2-（4-Methoxy-6-chloro）-pyrimidinyl]- N-[3-methyl-2-（4-chlorophenyl）butyryl]-urea

1 INTRODUCTION The acyl ureas are a kind of high biological acti- vity compounds with low toxicity to mammals, birds, fish, amphibians, etc., and significant organic synthe- sis intermediates working extensively as insecticides, pesticides, fungicides and herbicides in agrochemi- cal industry[1～7]. While pyrimidinyl derivatives show excellent biological activities in the development of pesticide, and are used to develop high effective and high select herbicides. For example, pyrimidiny su…     

Synthesis of β-ketoenamine donors having O, N, Se/Te donor functionalities and their reaction chemistry with Pd(II) and Pt(II) metal ions

Monoanionic tridentate ligands LH_a and LH_b containing ONSe and ONTe donor sequences and their Pd²⁺ and Pt²⁺ derivatives were synthesized and characterized. The formation of a five- and a six-membered ring around the central metal atom and associative phenomena in solutions provide extra stability to the metal complexes.     

Synthesis and red luminescence of Pr-doped CaTiO3 nanophosphor from polymer precursor

Uniform and sphere-like nanoparticles of crystalline Pr³⁺-doped CaTiO₃ have been prepared from complex polymer precursor at 600°C, in which, metal atoms are previously dispersed by citric acid in ethylene glycol solvent. The decomposition process of the precursor, crystallization, and particle sizes of CaTiO₃ have been investigated by using thermal analysis, powder X-ray diffraction and transmission electron microscopy. Diffuse reflectance spectra, photoluminescence and decay curve indicate that a strong red emission located at the nearly NTCS “ideal red” site is deduced from the energy transfer from the band gap absorption to doping Pr³⁺ ions. The thermoluminescence curves exhibit that a potential long phosphorescent material based on Pr³⁺-doped CaTiO₃ will be explored in future.     

Synthesis and polymerization of N-[N′-(α-methylbenzyl)aminocarbonyl-n-alkyl]maleimide

Two types of optically active N-[N′-(α-methylbenzyl)amino/carbonyl-n-alkyl]maleimides (MBAC) were synthesized from maleic anhydride, 6-amino-n-caproic acid (or 12-amino-n-dodecanoic acid), and (R)-(+)-α-methylbenzylamine. Radical homopolymerizations of MBAC were performed in several solvents at 60 and 110°C for 24 h to give optically active polymers. Radical copolymerizations of MBAC were performed with styrene (ST) and methyl methacrylate (MMA) in dioxane at 60°C. The monomer reactivity ratios and the Alfrey-Price Q-e values were determined. Chiroptical properties of the polymers and copolymers were investigated. © 1995 John Wiley & Sons, Inc.