1 319和1 338 nm双波长Nd:YAG脉冲激光输出实验研究

 根据计算得到的双波长激光振荡的阈值条件,激光实验中对全反镜镀制1 319和1 338 nm的全反膜（其反射率大于99.73%,而对1 064 nm激光的反射率约为7%）;输出镜采用对1 064 nm强谱线95%的高透过率,而对1 319和1 338 nm谱线的透过率分别为34.7%,32.5%,有效抑制了强线1 064 nm振荡,成功实现了1 319和1 338 nm Nd:YAG同时双波长激光脉冲输出。当输入能量为125 J时,1 319和1 338 nm脉冲双波长激光的单脉冲总输出能量为0.89 J,电-光转换效率为0.71%,斜率效率为0.89%。输出的双波长激光的中心波长分别在1 318.8和1 338.2 nm处,谱线宽度（FWHM）分别为0.35和0.48 nm,强度之比为36:44。     

用于空间碎片清除的高功率激光器（英文）

虽然人类的太空活动已经考虑了尽量减少空间碎片的措施,但近地轨道碎片的数量仍呈指数增长,特别是中小型碎片的现有数量已对在轨卫星构成了实质性的威胁。作为具有较高期待的消除碎片办法,用地基DF激光器和空基Nd∶YAG激光器消除碎片的方案令人关注,它们可以以低成本和非破坏性的方式清除空间轨道的危险碎片。本文介绍了使用平均功率为100 kW的高功率、高重复频率P-P Nd∶YAG激光器和平均功率约为1.5 MW的DF激光器来保护在轨飞行器和清除直径为1～10 cm空间轨道危险碎片涉及的相关工作。     

蓝色长余辉光致荧光粉的研究

高温固相反应合成了蓝色长余辉光致荧光材料CaAl2O4∶Eu2 ,Nd3 ,La3 ,激发后在暗室中观察,余辉的颜色为蓝色。进行了添加辅助激活剂的实验,首次在CaAl2O4∶Eu2 ,Nd3 中添加La3 。测定了该长余辉材料的激发光谱、发射光谱、余辉亮度和可视余辉时间,并对长余辉发光机理进行了探讨。余辉发射光谱的峰值波长为440nm,可视余辉时间达到18h以上。波长为280~380nm的光都可将该材料激发。实验结果表明,添加辅助激活剂La3 ,延长了CaAl2O4∶Eu2 ,Nd3 的可视余辉时间。在CaAl2O4∶Eu2 ,Nd3 ,La3 中,Eu2 是发光离子,Nd3 和La3 是辅助激活剂,发射光谱由Eu2 的激发态4f65d到基态4f7的电子跃迁产生。     

Nd(Fe,Si)11Cx化合物的全电子计算(x=0,2)

采用基于第一原理的全势能线性缀加平面波加局域轨道((L)APW lo)方法对Nd(Fe,Si)11Cx化合物(x=0,2)的电子结构进行了计算,得到了化合物态密度和磁矩等信息.计算结果表明NdFe9Si2化合物中Si原子主要与4b和32i位Fe原子产生杂化,导致Fe原子磁矩减小.NdFe9Si2C2化合物C原子使32i位Fe原子磁矩进一步降低,同时减弱了Si原子的影响,使得4b位Fe原子磁矩增大.     

Cr,Nd:YAG self-Q-switched laser with high efficiency output

The high efficient laser performance of self-Q-switched laser in the co-doped Cr⁴⁺,Nd³⁺:YAG microchip with 1.8 mm thickness was demonstrated. The slope efficiency is varied with the reflectivity of output coupler at 1064 nm, and the highest slope efficiency of 26% was obtained for 95% reflectivity of output coupler at 1064 nm. The pulse width, the single pulse energy and the pulse repetition rate for different reflectivity of the output couplers were measured, and the experimental results agree with the numerical calculations of the passively Q-switched rate equations. This can lead to develop the diode laser pumped monolithic self-Q-switched solid-state microchip lasers, especially for the intracavity frequency-doubled solid-state microchip lasers.     

Studies on Nd:YAG Single-pass Amplifiers for High-power Q-switched Laser System

The output of Nd∶YAG single-pass laser amplifiers is studied analytically and experimentally. Methods of analysis for single-pass Nd∶YAG laser amplifier are presented. A flashlamp-pumped Q-switched Nd∶YAG oscillator/amplifier laser system has been developed with the average output power of 121.5 W.     

Laser induced copper electroless plating on polyimide with Q-switch Nd:YAG laser

The results of laser induced deposition of copper on polyimide substrate from copper electrolyte solution are reported. Unlike most work reported in the literatures where CW Ar⁺ lasers were used, a second harmonic (532 nm wavelength) Q-switch Nd:YAG laser was used for our experiments. The deposition process was conducted by laser-catalyzing of the polyimide surface and subsequent photothermal-accelerated reduction of copper-complex ions in an alkaline reducing environment. The characteristics of the deposited copper line were investigated in terms of laser beam scanning speed, and the number of scans. The surface morphology and chemical composition of the deposited copper were analyzed using field emission scanning electron microscope (FESEM) and energy dispersive spectrometer (EDX). The optimum processing conditions have been identified. The copper deposit was found to adhere well to the substrate.     

闪光灯泵浦的Nd:KGd(WO4)2激光器

报道了用闪光灯泵浦的掺钕的钨酸钆镓(Nd³⁺:KGd(WO₄)₂激光器.在重复频率1Hz,脉宽120μs的灯泵下,测量了不同透过率下激光输出能量,获得最大输出能量384mJ,斜率效率1.0%,外推阈值0.54J.在调Q运行时,Nd:KGW晶体的斜率效率为0.16%,最大输出能量46mJ.     

The effect of microscopic features upon the transmissivity of enclosed laser ablated laminated metallised polymer films

A vacuum-deposited aluminium layer (20 nm) is sandwiched between two layers of laminated oriented polypropylene (OPP) film whose thickness varies from 20 to 40 μm. Selected areas of this sealed system were transparentised by the redistribution of the aluminium layer without breaking the seal or causing damage to the OPP film using a 75 W Q-switched Nd:YAG laser. The resultant transparentised films contain aluminium particles, distorted polymer areas and intact areas of the vacuum-coated aluminium layer. This paper investigates the effect of microscopic features upon the overall transmissivity of the laser-treated films and hence the quality of the transparentisation process.     

Nd:Ca4ReO(BO3)3(Re=Gd,Y)晶体最佳激光、最佳倍频及最佳自倍频方向的确定

介绍了Nd:Ca4ReO(BO3)3(Re=Gd,Y)晶体最佳激光方向、最佳倍频方向的确定.综合考虑激光受激发射截面、抽运光吸收系数、有效非线性系数的各向异性,分析了自倍频性质的空间分布,并就此确定出最佳自倍频方向 关键词： Nd:Ca4ReO(BO3)3(Re=Gd Y)晶体 激光发射 倍频 自倍频