丙烯腈水相沉淀聚合研究进展

结合近几年的研究成果,笔者对丙烯腈水相沉淀聚合机理、聚合动力学、动力学数学模型诸方面问题进行了系统的综述,反映了该领域的研究概况和最新研究成果.     

铱(III)离子催化铈(IV)离子氧化四氢糠醇的动力学及机理

在酸性介质中用氧化还原滴定法研究了铈(IV)离子在痕量铱(III)离子催化作用下，于298~313 K区间氧化四氢糠醇(THFA)的反应动力学. 结果表明，反应对铈(IV)离子为一级，对铱(III)离子也为一级，对四氢糠醇的表观反应级数为正分数. 准一级速率常数kobs随[H+]增加而增大，而随[HSO₄－]增加而减小. 在氮气保护下，反应能引发丙烯腈聚合，说明在反应中有自由基产生. 通过kobs与[HSO₄－]的依赖关系，找到本反应体系的动力学活性物种是Ce(SO₄)₂，并计算出平衡常数，速控步骤的速率常数及相应的活化参数.     

Synthesis and mechanism research of an ethylene glycol-based sol-gel method for preparing PZT nanopowders

Lead zirconate titanate nanopowders Pb(Zr_0.52Ti_0.48)O₃ (PZT) were prepared by modified sol-gel process in ethylene glycol system with zirconium nitrate as the zirconium source. The research showed that it was critical to add lead acetate after the reaction of zirconium nitrate and tetrabutyl titanate in ethylene glycol system for preparing PZT of exact titanium content. The reaction mechanisms of the sol synthesis, preparation of xerogel and agglutinating process were characterized through using FT-IR, NMR, TG-FTIR, and GC-MS. The experiment proved that ethylene glycol system did not rely on hydrolysis and condensation reactions in the process of the sol formation, but on the formation of chain or network large molecules from complexation of ethylene glycol and all Ti and minor Pd, Zr. In the preparation of xerogel, the complexation reaction was so completed that it formed large molecules network composed of metal and dioxyethyl. Bulk weight loss happened before 350°C in the process of sintering xerogel to prepare PZT nanopowders. Volatile matters and vapor phase decomposition resultants were primarily oxy-compounds including ethylene glycol, aldehyde-ketone compounds, carbon dioxide and nitrate radical conversion matters. After 350°C, primary vapor phase decomposition resultants were carbon dioxide and minor carbonyl compound.     

从氨性柠檬酸溶液中电沉积Ni-Mo的机理研究

含钼大于约27％（质量分数）Ni－Mo合金，具有较高的耐蚀性，特别是在盐酸和硫酸溶液中，其耐蚀性优于SUS304不锈钢［1］．因此，人们对该种合金的电沉积进行了广泛的研究［1－4］．对合金共沉积机理也作了一定的研究．一般认为，钼不能单独进行电沉积，但它可以同铁族元素共沉积［5］．对钼与铁族元素的共沉积机理，人们已提出了几种假设．一般认为［3］，钼可能是多步还原，即六价钼首先被电化学还原成低价钼化合物，而后由吸附在诱导金属（铁族元素）上的原子氢进一步还原成合金中的零价钼，为了进一步弄清Ni－Mo合金的共沉积机理，本…     

Syntheses, spectroscopic characteristics and thermolytic rearrangements of bis-[(trimethylgermyl)methyl]platinum(II) and bis-[(trimethylstannyl)methyl]platinum(II) complexes

The preparations and spectroscopic characteristics are reported of a series of (trimethylgermyl)methyl- and (trimethylstannyl)methylplatinum(II) complexes with diene and P-donor ancillary ligands, cis-Pt(CH₂GeMe₃)₂L₂ (L = PPh₃ or PPh₂Me; L₂ = dppe or cod) and cis-Pt(CH₂SnMe₃)₂L₂ (L = PPh₃; L₂ =cod). Thermolysis of toluene solutions of cis-Pt(CH₂GeMe₃)₂(PPh₃)₂ leads to cis-Pt(Me)(CH₂GeMe₂CH₂GeMe₃)(PPh₃)₂ via β-alkyl migration, after (non-rate-limiting) phosphine dissociation. Estimated activation parameters (ΔH_{298 K}^‡ = 126 ± 3 kJ mol⁻¹, ΔS^‡ = + 17 ± 7 J mol⁻¹ K⁻¹ and hence Δ_{298 K}^‡ = 121 ± 5 kJ mol⁻¹) suggest that this system is more migration labile than its silicon analogue, primarily as a result of a lower activation enthalpy. While cis-Pt(CH₂GeMe₃)₂(PPh₂Me)₂ reacts similarly but less readily, Pt(CH₂GeMe₃)₂(dppe)₂ is inert at operable temperatures. Thermolysis of Pt(CH₂GeMe₃)₂(cod) generates 1,1,3,3,-tetramethyldi-1,3-germacyclobutane as the major organogermanium product, while from cis-Pt(CH₂SnMe₃)₂(PPh₃)₂, 1,1,3,3-tetramethyldi-1,3-stannacyclobutane predominates. Mechanistic implications are discussed.     

Cyclodextrins as chiral stationary phases in capillary gas chromatography. Part VII: Cyclodextrins with an inverse substitution pattern – synthesis and enantioselectivity

Transferring the site of specific substitution of dipentylated cyclodextrins with methyl or acyl residues from the secondary 3-hydroxyl group to the primary 6-hydroxyl group was expected to provide new information on the mechanism of chiral recognition. The 3-position points towards and the 6-position points away from the cyclodextrin cavity which via inclusion complex formation is supposed to play a major role in chiral separation. The “inverse” 6-O-acyl-2,3-di-O-pentyl-cyclodextrins displayed almost no enantioselectivity but the corresponding 6-O-methyl derivatives are a versatile supplement to the chiral capillary GC phases nowadays available. Among the compounds that could be enantiomerically resolved are alcohols, amino acids, alkyl halides, bicyclic ethers, acetals, olefins, other hydrocarbons and chiral pharmaceuticals.     

Electrochemical studies of the oxidation mechanism of polyamide on glassy carbon electrode

Polyamides containing N-methyl pyrroles and N-methyl imidazoles are a type of small molecule that can bind and recognize the bases of DNA with high affinity and specificity. Five polyamides were studied at glassy carbon electrode in acetate buffer by cyclic and differential pulse voltammetry to clarify their redox pathways. The polyamide electrochemical responses are compared by peak currents and peak potentials. The slopes of the three anodic E_p vs. pH plots of a typical polyamide are linear and show 0.059, 0.057, 0.056 V per pH in acid media, respectively, which correspond to a mechanism involving the equal number of electrons and protons. A possible mechanism for the redox pathway of various polyamides is proposed: the oxidation product of imidazole ring is acylamide and the results of in situ UV–Vis spectroscopy at Pt web electrode support the proposed mechanism. electrospray ionization mass spectroscopy (ESI-MS) indicates that one or two oxygen atoms are added into polyamide molecule after electrochemical oxidation.     

铁掺杂TiO2纳米管阵列对不锈钢的光生阴极保护

在含FeSO4的HF、H2SO4/HF、NaF/Na2SO4溶液中,通过电化学阳极氧化直接在纯钛表面制备Fe 掺杂的TiO2(Fe-TiO2)纳米管阵列. 应用X射线衍射(XRD)、扫描电子显微镜(SEM)、紫外-可见吸收光谱(UV-Vis)、X 射线光电子能谱(XPS)等手段对纳米管阵列的结构、形貌及化学组成进行表征. 利用光电化学测量研究Fe-TiO2纳米管阵列在不同波长范围内的光电响应特性和光生阴极保护行为. 考察了温度、时间、掺杂含量等参数对TiO2纳米管阵列的几何尺寸、形貌和光电性能的影响. 结果表明, Fe掺杂可有效减缓TiO2纳米管阵列载流子的复合, 窄化TiO2带隙宽度, Fe-TiO2在410-650 nm范围显示强吸收, 并使光谱响应扩展到波长大于400 nm 的可见光区. 实验结果还表明, Fe-TiO2纳米管阵列对316不锈钢(316L)具有良好的光生阴极保护作用, 暗态下阴极保护作用可继续维持.     

Hydrothermal in situ Ligand Synthesis from 1,10-Phenanthroline-5,6-dione and Characterization of 1D Coordination Polymers [Co（bpdc）（H2O）3] · H2O and [Cu（bpy）V2O6]

Hydrothermal treatment of MCl2(M=Co or Cu), NH4VO3, and 1,10-phenanthroline-5,6-dione(pdon) resulted in the formation of a duplex coordination polymer [Co(bpdc)(H2O)3]·H2O(bpdc=2,2′-bipyridine-3,3′-dicarboxylate) and a chain-like coordination polymer [Cu(bpy)V2O6](bpy=2,2′-bipyridine). X-ray single-crystal structural analysis shows that under hydrothermal conditions and in the presence of different transition metals, the organic reagent pdon was transformed in situ into bpdc and bpy, respectively. Mechanism of the in situ ligand synthesis reaction has been discussed.     

Recent development of non-faradaic potentiometry

Non-faradaic potentiometry has been plagued by a great many fundamental errors and a lack of conceptualization. Of greatest concern is the second Nernst equation hiatus. Potentiometry may be generally classified as faradaic and non-faradaic. The former deals with the redox reactions using the Nernst equation to explain the potential origin. The latter deals with the non-redox reactions using the Boltzmann and modified Boltzmann equations to explain the origin of electrode potential. Redox faradaic potentiometry has been well described in the textbooks. However, non-faradaic potentiometry has been almost completely neglected in the literature. Many well-known electrodes, such as the pH glass electrode, common reference electrodes, and ion selective electrodes (ISE) have been mistakenly interpreted as redox reactions or ion exchange reactions. New theories and experimental results show their mechanisms to be non-faradaic in nature. Furthermore, the reaction mechanisms for ISE have been confused in textbooks with redox reactions and the Nernst equation. The ISE potentials originating from adsorption of ions or charged particles based on surface charge density will be explained using the double and counterion triple layers concept. The new counterion triple layer concept may be applied to the potential development of sensors. The reason for a new concept, theory, or mechanism is to better explain the phenomena. Examples will be given of how our new concept explains the capacitor, counterion triple layer, surface adsorbed layers interactions, and the interface structure. We will also discuss the new sensor development based on the new adsorption concept. For the first time a new type of Ag/AgCl reference electrode for non-faradaic potentiometry will be presented, one without a liquid junction and with a Pt wire instead of a salt bridge. They will help open up a new horizon for electrochemical sensor research and may be used under unusual conditions, such as high temperature and high pressure, stirring, etc.