轧制道次间插入冷却对特厚钢板组织与性能的影响

使用实验轧机旁冷却装置配合轧机进行轧制实验，研究轧制道次间不同冷却工艺对特厚钢板组织和性能的影响规律.研究结果表明:采用道次间冷却工艺可以在全厚度方向获得组织细化及强韧性提高效果，采用强冷道次间冷却实验钢1/4处晶粒尺寸可细化至10μm，强度为376MPa，-40℃冲击功为169J;心部晶粒尺寸可细化至15μm，强度为360MPa，-40℃冲击功为123J.本工艺可形成470μm厚表层细晶层，晶粒尺寸可细化至5μm;粗轧道次间插入冷却工艺轧制钢板强度和冲击韧性优于中间坯冷却工艺;随冷却强度增加，钢板内部组织明显细化且强度大幅提高.     

用标准件对梯度磁场定标

就标准厚度卡片在霍尔传感器的定标方面的应用作了有益的探讨。在纵向测量微小长度时,霍尔片处于磁场边缘位置,其对磁场的梯度更大,即灵敏度更高,且靠中心位置的线性更好。     

非均匀介质下的可调光流控器件及其生化应用

 探讨了非均匀介质下不同光流控器件及其生化应用。在微流控芯片上，主要从2个方面开发和实现各类具有光波导、透镜、细胞计数、化学检测等功能的新器件。首先，在液液非均匀介质下，通过调节沟道内液体流速，控制液体间的对流扩散来实现液体在微腔内的渐变折射率分布和阶跃分布，从而得到其特殊的光学特性，例如光束分离、弯曲、自聚焦等。其次，在固体非均匀介质下，利用特殊的微流结构与液体相结合，实现更加灵敏可调的新型探测手段。这些新型技术手段分别在生物传感、能源生产、细胞探测及海水检测等诸多应用中可发挥关键性作用。     

Numerical solutions of the shallow water equations with discontinuous bed topography

A simple scheme is developed for treatment of vertical bed topography in shallow water flows. The effect of the vertical step on flows is modelled with the shallow water equations including local energy loss terms. The bed elevation is denoted with z_b^‐ for the left and z_b⁺ for the right values at each grid point, hence exactly representing a discontinuity in the bed topography. The surface gradient method (SGM) is generalized to reconstruct water depths at cell interfaces involving a vertical step so that the fluxes at the cell interfaces can accurately be calculated with a Riemann solver. The scheme is verified by predicting a surge crossing a step, a tidal flow over a step and dam‐break flows on wet/dry beds. The results have shown good agreements compared with analytical solutions and available experimental data. The scheme is efficient, robust, and may be used for practical flow calculations. Copyright © 2002 John Wiley & Sons, Ltd.     

A stochastic algorithm using one sample point per iteration and diminishing stepsizes

A stochastic algorithm for finding stationary points of real-valued functions defined on a Euclidean space is analyzed. It is based on the Robbins-Monro stochastic approximation procedure. Gradient evaluations are done by means of Monte Carlo simulations. At each iteratex _i , one sample point is drawn from an underlying probability space, based on which the gradient is approximated. The descent direction is against the approximation of the gradient, and the stepsize is 1/i. It is shown that, under broad conditions, w.p.1 if the sequence of iteratesx ₁,x ₂,...generated by the algorithm is bounded, then all of its accumulation points are stationary.     

线性分式规划最优解集的求法

本文使用多面集的表示定理，导出了线性分式规划最优解集的结构，并给出确定全部最优解的计算步骤。     

解线性最小二乘问题的一个新并行算法

讨论了求解无约束线性最小二乘问题的一种并行单纯形法以及对它的改进算法并行共轭梯度—单纯形法 .算法本身具有很强的并行机制 ,能够充分地发挥并行机快速省时的特点 .本文也对算法做了理论分析 ,对算法的收敛性给予了证明 (在二维情形下 ) .最后做了数值实验 (由于软硬件条件的限制 ,并行算法未能在并行计算机上实现 ,鉴于这种情况 ,我们所做的数值实验均是在串行机上完成的 )     

Characterization of a 4-miktoarm star copolymer of the (PS-b-PI)3 PS type by temperature gradient interaction chromatography

Temperature gradient interaction chromatography (TGIC) was applied for the separation of a complex miktoarm star copolymer which has one polystyrene (PS) arm and three polystyrene-b-polyisoprene (PS-b-PI) diblock copolymer arms. Such miktoarm star polymers are much more difficult to characterize than branched homopolymers since the byproduct, typically polymers with missing arm(s) or coupled products, have not only different molecular weights but also different compositions. TGIC was able to fully separate the byproducts, and the composition of the molecular species corresponding to the different separated elution peaks was determined by two methods, fractionation/NMR and multiple detection (UV and RI). A reasonable agreement between the results of the two methods was obtained. By using the composition found, the corresponding molecular weights were determined by multi-angle light scattering detection. Based on the composition and the molecular weight we were able to identify the structure of the different molecular species.     

基于MMD算法的HMM参数重估计的矩阵表示

本文提出的MMD算法用于提高模型区别错误信息和正确信息的能力．利用该算法在对模型的参数进行重估计时．涉及到复杂的目标函数的梯度运算．击运用矩阵运算使得梯度运算变得简单明了，因此本文给出了MMD算法下的HMM参数重估计的矩阵表示形式并给出了证明．     

共轭斜量法在某些特征向量上收敛速度的估计

设 Ａ是对称正定矩阵，λ_1是 Ａ 的最大或最小特征值，χ_1是对应的特征向量．｛zk｝是用共轭斜量法求解方程组 Αχ＝ｂ时的近似解序列，ｅi＝Ａ～(_1)b-zi,本文给出了|x_1～Tei|较合理的上界估计式。从而为分析预处理共轭斜量法提供了进一步的理论基础。