Research on Reactivities of MoCluster． A Selective Substitution Reaction of the Bridging（dtp） Ligand and Structure of Tetranuclear Molybdenum Cluster Compound ［Mo_4S_4（μ－O_2CC_6H_5）_2（dtp）_4］

ＲｅｓｅａｒｃｈｏｎＲｅａｃｔｉｖｉｔｉｅｓｏｆＭｏＣｌｕｓｔｅｒ．ＡＳｅｌｅｃｔｉｖｅＳｕｂｓｔｉｔｕｔｉｏｎＲｅａｃｔｉｏｎｏｆｔｈｅＢｒｉｄｇｉｎｇ（ｄｔｐ）ＬｉｇａｎｄａｎｄＳｔｒｕｃｔｕｒｅｏｆＴｅｔｒａｎｕｃｌｅａｒＭｏｌｙｂｄｅｎｕｍＣ...     

Synthesis and Structure of Dimolybdenum Carbonyl Thiolate Compound [Et4N]2[Mo2（CO）8（SC6H4—CH3—m）2]

1 INTRODUCTION In 1984, thiolate ligand was successfully introduced into molybdenum carbonyl compound by the reaction of Mo(CO)6 with [Et4N]SR( R = C6H5, But) in a moderate condition[1]. From then on, a series of dinuclear molybdenum(0) carbonyl thiolate compounds have been synthesized and characterized by using a variety of thiolate ligands in our research group. It was found that a planar Mo2S2 unit is in the compound [Et4N]2[Mo2(CO)8(SC6H4-CH_3-p)2][2] (2) and a "butterfly" t…     

甲烷在Mo/HZSM-5催化剂上的脱氢聚合反应

对不同Mo含量的Mo／HZSM－5催化剂的结构进行了表征，并对这些催化剂的甲烷非氧气氛下的转化反应进行了考察．催化剂的BET比表面积及酸性随Mo含量的增加而降低，当Mo含量大于5％时，Mo对ZSM－5分子筛的晶型有影响，并出现MoO3物相．甲烷在700℃时可高选择性地生成苯和乙烯，最佳Mo含量大约为2％．纯的MoO3或HZSM－5上该反应几乎不进行，因此，可能是分散的钼氧离子和分子筛的酸中心是甲烷转化的活性中心，只有二者的协同作用才能促进甲烷的转化．反应后催化剂中的钼物种被还原了．催化剂上的积炭可能是催化剂失活的主要原因之一，烧炭后催化剂活性基本恢复．     

DEHYDROGENATION AND AROMATIZATION OF METHANE IN THE ABSENCE OF OXYGEN OVER DOPED Mo/HZSM-5 CATALYSTS

研究了在Ｍｏ／ＨＺＳＭ－５催化剂上添加助剂以及不同的反应预处理温度对甲烷无氧脱氢芳构化反应的影响。实验结果表明，由于第二组分的添加，Ｍｏ／ＨＺＳＭ－５催化剂的活性和选择性都得到了较大程度的改善。预处理温度是影响催化剂反应性能的关键因素。Ｍｏ－Ｒｕ／ＨＺＳＭ－５催化剂经过８７３Ｋ空气预处理后，甲烷在９７３Ｋ的转化率约为１０％，催化剂的稳定性也得到较大程度的提高。ＴＰＳＲ实验结果表明，Ｒｕ的加入降低了芳烃生成的温度。ＴＰＯ和ＤＴＡ实验结果表明，在Ｍｏ－Ｒｕ／ＨＺＳＭ－５催化剂上可生成较多的碳物种，结合反应结果，可以认为反应过程中生成的碳物种对甲烷的无氧脱氢芳构化反应是起积极作用的     

新型介孔分子筛KIT-1加氢脱硫催化剂的研究

制备了新型的结构排列无序的介孔分子筛KIT-1和负载Ni, Mo的KIT-1加氢脱硫催化剂。实验结果表明MoO3较易分散在KIT-1的表面,而NiO则容易在其表面形成小晶粒。与以MCM-41和NaY分子筛为载体的Ni, Mo催化剂相比, KIT-1负载催化剂具有较高的加氢脱硫催化活性,因为KIT-1载体具有相互交错的三维孔道结构, 有利于反应物和产物的扩散, 而不容易受孔道堵塞的影响。     

Group 6 tetracarbonyl complexes of N-[(2-pyridyl)methyliden]-α (or β)-aminonaphthalene: Spectral characterization,electrochemistry, solvatochromism and photophysical studies

A new series of group 6 carbonyl complexes of N-[(2-pyridyl)methyliden]-α (or β)-aminonaphthalene (α/β-NaiPy) are described in this work. The complexes are formulated as cis-[M(CO)₄(α/β-NaiPy)] by elemental, mass and other spectroscopic data. The complexes show emission spectra at room temperature and their quantum yield lies between 0.4 and 0.5. All the complexes exhibit negative solvatochromism. Cyclic voltammetry shows metal centred oxidation and ligand reductions.     

Trigonal-planare CuX3-Gruppen in Cu2Mo6X14, X = Cl,Br, I

Trigonal Planar CuX₃-Groups in Cu₂Mo₆X₁₄, X = Cl, Br, I Cu₂Mo₆Cl₁₄ (I), Cu₂Mo₆Br₁₄ (II) and Cu₂Mo₆I₁₄ (III) were synthesized by thermal treatment of corresponding mixtures of copper(I) and molybdenum(II) halides. The crystal structures were determined by single crystal X-ray analyses. I and II show isotypism, cubic, Pn3 (no. 201, sec. setting), Z = 4, I: a = 12.772(3) Å, II: a = 13.350(2) Å. III shows a new structural type, orthorhombic, Pbca (No. 61), Z = 4, a = 16.058(3) Å, b = 10.643(2) Å, c = 16.963(3) Å. Trigonal planar CuX₃ units were found in I? III. Structural behaviour relations are discussed, especially with regard to ionic conductivity.     

Determination of the valence distribution of vanadium in polyolefin catalysts prepared from vanadium trichloride

An electrochemical method has been developed for determining the relative amounts of V(II) and V(III) in polyolefin catalysts prepared using aluminum alkyls and vanadium trichloride. The catalyst, usually obtained as a slurry in n-heptane, is titrated potentiometrically with ceric sulfate using a platinum indicator electrode. Under proper experimental conditions, 2 breaks are obtained, corresponding to the reactions V(II) →V(III) + e and V(III) →V(IV) + e. Interferences from other components of the catalyst are negligible. The method is useful for the analysis of both laboratory catalysts and grab samples taken from pilot plant reactors.     

钼对低合金钢硝酸盐体系应力腐蚀的影响

以高风温热风炉用钢的沿晶应力腐蚀开裂问题为背景,研究了Ｍｏ对低合金钢在硝酸盐溶液中的应力腐蚀行为。结果表明,低合金钢中加入合金元素将使钢中贝氏体和／或珠光体含量增大,从而提高了材料的稳定性和抗ＳＣＣ耐蚀性。提出了低合金钢／硝酸盐溶液体系的“温度－钼含量－ＳＣＣ图”。     

Synthesis and Structureof［（C_2H_5）_4N］［Mo_3（μ_3－O）（μ－Cl）_3（μ－CH_3CH_2COO）_3Cl_3］

ＳｙｎｔｈｅｓｉｓａｎｄＳｔｒｕｃｔｕｒｅｏｆ［（Ｃ_２Ｈ_５）_４Ｎ］［Ｍｏ_３（μ_３－Ｏ）（μ－Ｃｌ）_３（μ－ＣＨ_３ＣＨ_２ＣＯＯ）_３Ｃｌ_３］ＺｈｕａｎｇＨｏｎｇ－Ｈｕｉ；ＷｕＤｉｎｇ－Ｍｉｎｇ；ＨｕａｎｇＪｉａｎ－Ｑｕａｎ；ＨｕａｎｇＪｉｎ－Ｌ...