One-step synthesis of porous PtNiCu trimetallic nanoalloy with enhanced electrocatalytic performance toward methanol oxidation

Pt-based alloy nanoporous structures have attracted a lot of attention because of their high activity and stability toward alcohol oxidation reactions. Especially, Pt alloying with Earth-abundant metal can lower the cost of catalyst. Here, we introduce a one-pot approach to synthesize bimetallic PtCu and Ni-doped PtCu nanoalloy with porous structure. The as-synthesized Ni-doped Pt₆₀Ni₃Cu₃₇ nanoalloys exhibit excellent electrocatalytic properties toward methanol oxidation in acidic medium. The mass activity of the as-synthesized Pt₆₀Ni₃Cu₃₇ nanoalloys is 3.6 times and 5.3 times that of Pt₅₅Cu₄₅ nanoalloys and commercial Pt black for methanol oxidation in 0.2?M methanol solution. Besides, the stability of the as-synthesized Pt₆₀Ni₃Cu₃₇ nanoalloys was much better than Pt₅₅Cu₄₅ nanoalloys and commercial Pt black. After 3600?s chronoamperometry test, the remaining values of the Pt₆₀Ni₃Cu₃₇ nanoalloys are 3.7 times and 11.0 times that of Pt₅₅Cu₄₅ nanoalloys and commercial Pt black. And it is the first time to report that small amount of Ni dopants can boost the activity and stability of PtNiCu alloys toward methanol oxidation.     

The function of ruthenium oxides in Pt-Ru catalysts for methanol electro-oxidation at low temperatures

The electrocatalytic activities of different binary Pt-Ru(ox) catalysts have been investigated in half-cell experiments by cyclic voltammetry and stationary current–potential measurements. The materials have been prepared using a modification of the Adams method. X-ray analytical methods (X-ray diffraction, XRD, and energy dispersive X-ray spectroscopy, EDX) as well as thermogravimetric analysis (TGA) have been used to characterize the composition and the catalysts' content of the crystalline phases, and their surface areas have been determined by the BET method. It is found that the composition of the catalyst is strongly influenced by the synthesis temperature, which is varied between 400 and 600 °C. In contrast, the particle size of the metallic phases of the catalysts is not significantly affected for synthesis temperatures below 600 °C, as investigated by transmission electron microscopy. Synthesis temperatures of 500 °C favor the formation of crystalline RuO₂ phases, whereas at synthesis temperatures below 500 °C the presence of metallic alloy and of hydrous oxides was derived by the combined XRD and EDX measurements. The stationary current–potential curves show a correlation with the different synthesis temperatures. It can be concluded that both the presence of an alloyed metallic Pt-Ru phase as well as the presence of amorphous hydrated Ru oxides are favorable for the electrocatalytic oxidation of methanol.Dedicated to Prof. Wolf Vielstich on the occasion of his 80th birthday in recognition of his numerous contributions to interfacial electrochemistry     

Electron-transfer reduction of selected alcohols with alkalide K, K(15-crown-5)2 via organometallic intermediates

The course of the reaction of alkalide K⁻, K⁺(15-crown-5)₂1 with selected alcohols depends on the kind of alcohol and the mode of substrate delivery. In the case of methanol, potassium methoxide formed initially undergoes destruction at the excess of 1. It results in potassium oxide and methylpotassium. The latter opens the crown ether ring giving potassium tetraethylene glycoxide vinyl ether and methane. A similar course of the process is observed for propanol. Potassium glycidoxide is the main product formed in the reaction of 1 with glycidol. Its oxirane ring is opened at the excess of 1. Organopotassium alkoxides, i.e., potassium potassiomethoxide and dipotassium potassiopropane-1,2-dioxide are intermediate products of this reaction. They react then with the crown ether. Potassium methoxide, potassium enolate of acetaldehyde, dipotassium propane-1,2-dioxide and potassium tetraethylene glycoxide vinyl ether are the final products of this process.     

Selective ortho-cleavage of methoxymethyl- and 4-methoxybenzyl ethers

Iodine in methanol has been found to be an effective catalyst system for the cleavage of alkoxymethyl ethers. This catalyst system is particularly useful for the selective removal of ortho-methoxymethyl- and ortho-(4-methoxybenzyl) ethers in the presence of their para-counterparts. Further investigation of various metal salts in methanol for their ability to cleave alkoxymethyl ethers revealed high-valent salts as effective catalysts, presumably through the release of small quantities of HCl.     

Electrochemically Co‐deposited Teeth‐like Virus‐Platinum Nanohybrids as an Electrocatalyst for Methanol Oxidation Reaction

M13 virus (M13) as scaffolds has a major appeal, owing to their mono‐dispersed, fibrillar morphology and engineerable surface reactive sites. Herein we had developed a facile electrocatalyst for energy application. Platinum nanostructures are directly co‐deposited from a wild‐type M13 (or) two different engineered M13 mixed electrolytes onto the ITO electrodes. The engineered M13 with 4E peptides could specifically nucleate Pt precursor thereby enables the efficient growth of teeth‐like structures at the ITO electrode. The electrocatalytic activity of the resulting electrocatalyst toward methanol oxidation in alkaline medium was investigated and found enhanced mass activity (0.321 A/mg_Pt) relative to the catalyst prepared from wild‐type M13, Y3E peptides engineered M13 and without M13. Our novel electrocatalyst fabrication can be extended to other metal and metal oxides and its application might be useful to develop novel clean and green energy generating and storage materials.     

一种甲醇直接气相羰基化新催化剂

本世纪７０年代Ｍｏｎｓａｎｔｏ公司成功开发了甲醇液相羰化ＲｈＩ催化体系，使甲醇羰化生产醋酸成为重要的工业过程．然而，由于此工艺产物与催化剂分离复杂、铑资源紧缺以及体系中还必须加大量的碘甲烷（或氢碘酸）作促进剂，设备腐蚀严重．８０年代以来，甲醇气相羰...     

An NMR study of methanol diffusion in polymer electrolyte fuel cell membranes

Methanol diffusion in two polymer electrolyte membranes, Nafion 117 and BPSH 40 (a 40% disulfonated wholly aromatic polyarylene ether sulfone), was measured using a modified pulsed field gradient NMR method. This method allowed for the diffusion coefficient of methanol within the membrane to be determined while immersed in a methanol solution of known concentration. A second set of gradient pulses suppressed the signal from the solvent in solution, thus allowing the methanol within the membrane to be monitored unambiguously. Over a methanol concentration range of 0.5–8 M, methanol diffusion coefficients in Nafion 117 were found to increase from 2.9 × 10⁻⁶ to 4.0 × 10⁻⁶ cm² s⁻¹. For BPSH 40, the diffusion coefficient dropped significantly over the same concentration range, from 7.7 × 10⁻⁶ to 2.5 × 10⁻⁶cm² s⁻¹. The difference in diffusion behavior is largely related to the amount of solvent sorbed by the membranes. Increasing the methanol concentration results in an increase in solvent uptake for Nafion 117, while BPSH 40 actually excludes the solvent at higher concentrations. In contrast, diffusion of methanol measured via permeability measurements (assuming a partition coefficient of 1) was lower (1.3 × 10⁻⁶ and 6.4 × 10⁻⁷ cm² s⁻¹ for Nafion 117 and BPSH 40 respectively) and showed no concentration dependence. The differences observed between the two techniques are related to the length scale over which diffusion is monitored and the partition coefficient, or solubility, of methanol in the membranes as a function of concentration. For the permeability measurements, this length is equal to the thickness of the membrane (178 and 132 μm for Nafion 117 and BPSH 40 respectively) whereas the NMR method observes diffusion over a length of approximately 4–8 μm. Regardless of the measurement technique, BPSH 40 is a greater barrier to methanol permeability at high methanol concentrations.     

新型YS类高分子铑配合物催化甲醇羰基化反应制备乙酸和乙酐

以含有两种不同配位原子的线型或交联大孔球型共聚物为配体的新型铑配合物,能在温和条件下催化甲醇羰基化为乙酸和乙酐.实验结果表明,这些新型共聚物铑配合物具有鳌合型顺-二羰基铑(Ⅰ)的结构特征,并有良好的热稳定性及高的催化活性和选择性.     

聚合物膜燃料电池用电催化剂研究进展

综述了聚合物膜燃料电池（ＰＥＭＦＣ）用电催化剂最新的研究进展,包括阳极甲醇催化剂有机螯合物催化剂及其它的还原催化剂。     

ZrO_2对CuO-ZnO-ZrO_2催化剂低压合成甲醇的促进作用

我们曾报道CO_2/H_2在CuO-ZnO及CuO-ZnO-ZrO_2催化剂上低压合成甲醇的反应,指出CuO-ZnO-ZrO_2对CO_2/H_2制甲醇具有较高的活性和选择性。本文通过TPD-MS测试研究了第3组分ZrO_2的加入对CO_2/H_2在CuO-ZnO-ZrO_2催化剂上低压合成甲醇的促进作用。 1 实验部分 催化剂的评价在恒压流动反应系统内进行。用色谱仪分析产物(Porapak Q柱,4 mm×3m,柱温120℃,CO、CO_2、CH_3OH、H_2O的保留时间分别为0.55、0.84、4.72、6.6 min),热