小长径比垂直管气液两相流动特性分析

实验观察了小长径比垂直上流管内流型及特点,并对管入口处的压力波动特性和系统的压差波动特性进行了试验研究.结果表明:小长径比(L/D)垂直管内流型表现为泡状流、塞状流、乳沫状流、环状流和液束环状流;分别增加管线中的气量、液量,或者同时增加气液流量,均会造成垂直管入口处压力波动的均值和最大压力的增加;压力信号的概率密度(PDF)大部分呈双峰分布,也存在单峰和多峰分布;差压信号的概率密度符合正态分布,其功率谱密度同压力信号相比具有频率波动范围宽、幅值小的特点.     

X-ray metrology for advanced silicon processes

X-ray reflectivity (XRR), X-ray fluorescence (XRF) and small angle X-ray scattering (SAXS) techniques are used to the monitoring of Cu/porous low κ processes, which are developed for the next generation (≤65 nm) integrated circuits. Sensitivity of XRR and XRF is sufficient to detect drifts of the copper barrier layer, copper seed layer and Cu CMP (chemical-mechanical polishing) processes. Their metrology key parameters comply with production requirements. SAXS allows determining the pore structure of low κ films: average pore size and pore size distribution.     

聚变等离子体中的快离子压强

本文运用Fokker-Planck方程的慢化近似,考虑存在多种离子成份(包括杂质),假定它们具有共同的温度,我们得到了聚变产生的快离子压强的简单封闭形式表示式。表明在典型的工作温度下(～60keV),D-~3He等离子体中聚变产生的快离子压强约为本底热压强的20％,这与D-T等离子体工作在20keV时的比值几乎相同。因此,D-~3He和D-T在它们相应的预期工作温度下,它们各自的快离子压强对总压强的影响是类似的,然而在更高的温度下,这个比值将变得更大。     

碳化硅压腔和高压下的中子衍射

使用宝石级碳化硅晶体作为压砧材料，成功研制出了碳化硅压腔（MAC），并应用全景式MAC进行了高压下物质的中子衍射实验研究。结果表明，MAC是一种既能产生高的压力又具有大的高压样品室的装置，特别适合于高压下的中子衍射研究。     

Low sintering temperature MnZn-ferrites for power applications in the frequency region of 400 kHz

In this paper, the effect of cubic zinc metaborate Zn₄O(BO₂)₆ on the sintering of MnZn-ferrites for medium frequency power applications is investigated. Zinc metaborate is synthesized in the laboratory using zinc oxide and boric acid as metal precursors. As observed, when zinc metaborate is added to the MnZn-ferrites at an optimum amount of 0.02 wt%, it significantly enhances densification and therefore allows, for a given density, reduction of the firing temperature by almost 200 °C. MnZn-ferrites exhibiting power losses of 70 mW/cm³ (measured at a frequency of 400 kHz, magnetic field 50 mT and temperature of 90 °C) are synthesized from conventionally milled powders with average particle diameter 0.6 μm, compacted and fired at 1100 °C. Identical experiments conducted under the same conditions on specimens without zinc metaborate additions revealed power losses greater than 300 mW/cm³, because of insufficient densification.     

Nonlinear modelling and control of a common rail injection system for diesel engines

Modern trends in designing mechatronic systems call for a synergic design of the separated subsystems (mechanic, electronic parts, control modules, etc.) concurring to the overall performance. Following this point of view, this paper presents a control oriented model and a nonlinear control design for a Common Rail injection system. First a model is developed, which is tuned in a virtual simulation environment, representing the injection system in details in a reliable replication of reality. Then a sliding mode control is developed. Both the model of the injection process and of the control law are validated by a virtual detailed simulation environment. The prediction capability of the model and the control efficiency are clearly shown.     

论浮力的计算

通过讨论物体下表面不与液体接触时浮力的计算,总结浮力计算的一般方法.     

Molecular dynamics of MgSiO3 perovskite melting

The melting curve of MgSiO分子动力学 MgSiO3钙钛矿 熔化温度 高压melting temperature, molecular dynamics, high pressureProject supported by the National Natural Science Foundation of China (Grant Nos 10274055 and 10376021),the Natural Science Foundation of Gansu Province, China (Grant No 3ZS051-A25-027) and the Scientific Research Foundation of Education Bureau of Gansu Province, China (Grant No 0410-01).2005-01-125/8/2005 12:00:00 AMThe melting curve of MgSiO3 perovskite is simulated using molecular dynamics simulations method at high pressure. It is shown that the simulated equation of state of MgSiO3 perovskite is very successful in reproducing accurately the experimental data. The pressure dependence of the simulated melting temperature of MgSiO3 perovskite reproduces the stability of the orthorhombic perovskite phase up to high pressure of 130GPa at ambient temperature, consistent with the theoretical data of the other calculations. It is shown that its transformation to the cubic phase and melting at high pressure and high temperature are in agreement with recent experiments.     

Converged properties of clean metal surfaces by all-electron first-principles calculations

All-electron full-potential linearized augmented plane-wave calculations of the surface energy, work function, and interlayer spacings of close-packed metal surfaces are presented, in particular, for the free-electron-like metal surfaces, Mg(0 0 0 1) and Al(1 1 1), and for the transition metal surfaces, Ti(0 0 0 1), Cu(1 1 1), Pd(1 1 1), and Pt(1 1 1). We investigate the convergence of the surface energy as a function of the number of layers in the slab, using the Cu(1 1 1) surface as an example. The results show that the surface energy, as obtained using total energies of the slab and bulk from separate calculations, converges well with respect to the number of layers in the slab. Obviously, it is necessary that bulk and surface calculations are performed with the same high accuracy. Furthermore, we discuss the performance of the local-density and generalized gradient approximations for the exchange-correlation functional in describing the various surface properties.     

Density functional theory investigation of the structure of SO2 and SO3 on Cu(1 1 1) and Ni(1 1 1)

Density functional theory (DFT) slab calculations, mainly using the generalised gradient approximation, have been used to investigate the minimum energy structures of molecular SO₂ and SO₃ on Cu(1 1 1) and Ni(1 1 1) surfaces. On Ni(1 1 1) the optimal local adsorption structures are in close agreement with experimental results for both molecular species obtained using the X-ray standing wavefield technique, although for adsorbed SO₂ the energetic difference between two alternative lateral positions of the lying-down molecule on the surface is marginally significant. On Cu(1 1 1) the results for adsorbed SO₂, in particular, were sensitive to the DFT functional used in the calculations, but in all cases failed to reproduce the experimentally-established preference for adsorption with the molecular plane perpendicular to the surface. This result is discussed in the context of previously published DFT results for these species adsorbed on Cu(1 0 0). The optimal geometry found for SO₃ on Cu(1 1 1) is similar to that on Ni(1 1 1), providing agreement with experiment regarding the molecular orientation but not the adsorption site.