Converged properties of clean metal surfaces by all-electron first-principles calculations

All-electron full-potential linearized augmented plane-wave calculations of the surface energy, work function, and interlayer spacings of close-packed metal surfaces are presented, in particular, for the free-electron-like metal surfaces, Mg(0 0 0 1) and Al(1 1 1), and for the transition metal surfaces, Ti(0 0 0 1), Cu(1 1 1), Pd(1 1 1), and Pt(1 1 1). We investigate the convergence of the surface energy as a function of the number of layers in the slab, using the Cu(1 1 1) surface as an example. The results show that the surface energy, as obtained using total energies of the slab and bulk from separate calculations, converges well with respect to the number of layers in the slab. Obviously, it is necessary that bulk and surface calculations are performed with the same high accuracy. Furthermore, we discuss the performance of the local-density and generalized gradient approximations for the exchange-correlation functional in describing the various surface properties.     

基于LiCo0.8M0.2O2 (M=Ni,Zr)薄膜的全固态薄膜锂电池

用射频磁控溅射结合传统退火的方法制备LiCo0.8M0.2O2 (M=Ni,Zr)阴极薄膜．X射线衍射、拉曼光谱、扫描电子显微镜等手段表征了不同掺杂的LiCo0.8M0.2O2薄膜．结果显示,700℃退火的LiCo0.8M0．2O2薄膜具有类似α-NaFeO2的层状结构．通过对不同掺杂锂钴氧阴极的全固态薄膜锂电池Li／LiPON／LiCo0.8M0.2O2的电化学性能研究表明,电化学活性元素Ni的掺杂使全固态电池具有更大的放电容量(56μAh／cm2μm),而非电化学活性元素Zr的掺杂使全固态电池具有更好的循环稳定性．     

Density functional theory investigation of the structure of SO2 and SO3 on Cu(1 1 1) and Ni(1 1 1)

Density functional theory (DFT) slab calculations, mainly using the generalised gradient approximation, have been used to investigate the minimum energy structures of molecular SO₂ and SO₃ on Cu(1 1 1) and Ni(1 1 1) surfaces. On Ni(1 1 1) the optimal local adsorption structures are in close agreement with experimental results for both molecular species obtained using the X-ray standing wavefield technique, although for adsorbed SO₂ the energetic difference between two alternative lateral positions of the lying-down molecule on the surface is marginally significant. On Cu(1 1 1) the results for adsorbed SO₂, in particular, were sensitive to the DFT functional used in the calculations, but in all cases failed to reproduce the experimentally-established preference for adsorption with the molecular plane perpendicular to the surface. This result is discussed in the context of previously published DFT results for these species adsorbed on Cu(1 0 0). The optimal geometry found for SO₃ on Cu(1 1 1) is similar to that on Ni(1 1 1), providing agreement with experiment regarding the molecular orientation but not the adsorption site.     

甲状腺肿块的高频彩色多普勒超声诊断

目的 :探讨高频彩色多普勒超声检查对甲状腺肿块的诊断价值。方法 :对 48例甲状腺包块患者进行二维及彩色多普勒血流显像超声检查。结果 :48例甲状腺包块患者共检出肿块 67个 ,超声检查与病理对照除 3例误诊外 ,其余 45例与病理结果包括肿块部位、数目均符合 ,符合率 90 % ( 42 / 45 )。结论 :高频彩色多普勒超声检查对甲状腺肿块具有较高的诊断价值 ,可为临床提供有价值的诊断依据     

DESIGN OF A NOVEL 2-D UNIPLANAR CRLH-TL STRUCTURE

A novel uniplanar 2-D composite right/left-handed transmission line (CRLH-TL) structure is proposed based on a general transmission line theory and the way to increase the relative operating bandwidth in the left-handed (LH) region and lower the LH operating frequency is illustrated. In addition, a new method to extract parameters and calculate the Bloch impedance of the structure is presented. Numerical results of the dispersion as well as the extracted parameters are given, which are calculated based on full-wave simulation. The present 2-D uniplanar CRLH-TL structure is applicable to 2-D left-handed materials in lower and wider LH frequency range. Supported by the National Natural Science Foundation of China (No. 60371010) (No. 60471037) (No. 63531020)     

Extension of the range of resonator scanning spectrometer into submillimeter band and some perspectives of its further developments

Extension of the working frequency of modern resonator spectrometers into submillimeter wave range is described. Experimental record of atmospheric absorption spectrum covering 45-370 GHz range is demonstrated for the first time, and measured water vapor J′_{ka′, kc′}-J_{ka, kc} = 5_1,5-4_2,2 at 325 GHz line parameters are presented. For the first time pressure lineshift for the 325-GHz water vapor line is measured. Further extension of working range is discussed. New estimations of physical limits of time needed for measurements of absorption in the whole Backward Wave Oscillator (BWO) range are given for phase continuous synthesizer regime. Basic schemes of fast broadband continuous phase synthesized sources are discussed. Verification of the previous measurements of water vapor 3_1,3-2_2,0 at 183 GHz line parameters is presented. Comparisons with ringdown resonator spectrometers are given.     

Optical modulation and digital demodulation of an in-plane moiré carrier

A rotational mismatch of gratings is used to generate a fringe carrier of an in-plane moiré pattern so that specimen deformation shows itself in the form of modulation of the carrier frequency. As both the unmodulated and modulated carriers are the patterns without fringe-loop or fringe-connection, they are automatically numbered with monotonical increasing orders by a digital image processing system without any ambiguity. The orders at every pixel of the image are determined by interpolation of the orders of the tracked fringes to establish two grey image files, from the difference of which, the orders of the in-plane displacement moiré are displayed with grey-level variation.     

超声波声孔效应中气泡动力学的研究

在超声快速制取组织细胞病理切片的过程中，发现激励信号对切片制取效果有明显的影响.为了掌握超声激励信号对组织细胞的影响规律，达到快速制取病理切片的最佳状态，从气泡空化模型入手，通过改变激励信号频率、声压、气泡初始半径和液体黏滞系数等参量，研究了声孔效应中气泡动力学激励机制.数值计算表明：空化泡振动随激励声压增强而升高，随液体黏滞系数增强而减弱；一定频率范围内空化泡振动能保持在膨胀、收缩和振荡的稳定空化状态，存在空化泡稳态振动的最佳激励频率；一定初始半径能保证空化泡产生稳定的振动，存在空化泡稳态振动幅度最大的初始半径.实际操作中，在频率、声压、初始半径和黏滞系数综合作用的若干空化阈内，声孔效应使超声快速法制取细胞组织切片获得最佳效果. 关键词： 声孔效应 超声空化 气泡振动 稳态空化域     

Design of polarization retarder suitable for nonlinear optical systems

We present a design technique of retarders suitable for nonlinear optical systems. A thin sample of LiNbO₃ crystal is utilized as a retarder for wide-ranging applications. Analysis shows that the same crystal can be used for single-wave or two-wave retardations, changing the orientation of the crystal only. As an application, the retarder is used to polarize two waves orthogonal, as necessary for difference frequency mixing in an AgGaSe₂ crystal.