Characteristic of a broadband Ti:LiNbO3 optical modulator with buried electrodes and etched grooves in the buffer layer

Traveling wave Ti:LiNbO₃ Mach-Zehnder optical modulators with buried electrodes and etched grooves in the SiO₂ buffer layer are analyzed by the finite element method. The tradeoff between the bandwidth BW and the half-wave voltage Vπ is discussed. The value of BW/Vπ is used to weight the total performance of the modulator. Taking a thick buffer layer and etching deep grooves in the buffer layer are demonstrated as two effective methods to improve the performance of the modulator. A 3-dB optical bandwidth of 18 GHz with half-wave voltage 5V at a wavelength of 1.55 pm could be obtained even though the electrode is not very thick. When the requirement of half-wave voltage is not very critical, a bandwidth of more than 100 GHz can be obtained.     

Contributions to the synthesis of some ferrocene-containing antibiotics

This Review discusses the synthesis and characterization by our Group of new antibiotics belonging to the class of penicillins, cephalosporins and rifamycins with ferrocenyl and 1, 1′-ferrocenilene residues in the molecule. As reactants for 6-aminopenicillanic acid (6-APA) and 7-aminocephalosporanic acid (7-ACA) the following were used: 1, 1-bis(chlorocarbonyl)ferrocene, ferrocenyl sulfochloride, 1, 1′-ferrocenylenedisulfochloride and thioglycolic acids S-modified with ferrocene. In the synthesis of rifamycins, the hydrazides of the thioglycolic acids, S-modified with ferrocene, were employed as nucleophilic agents. The synthesized intermediates were characterized by elemental analysis, TLC, IR, UV and ¹H NMR spectra. The characterization of new antibiotics was made by TLC, IR and UV spectral analysis. Biological activity was tested on Gram-negative and Gram-positive bacteria. Good activity is reported towards Gram-positive bacteria in the case of derivatives containing residues of thioglycolic acid S-modified with ferrocene, the antibacterial activity being similar to that of amoxicillin, carbenicillin and cephalothin. All compounds are inactive towards Gram-negative bacteria.     

关于I_3-半群(Ⅱ)

本文利用半群代数理论及偏序集理论、方法,继续讨论了I_3-半群的若干性质及其幂零性问题。给出了I_3-半群为幂零的若干充要条件,特别是给出了幂零的I_3-半群的序结构特征,完全确定了全序幂零的I_3-半群的结构。     

用激活性非线性介质Nd：MgO：LiNbO3产生二次谐波

以Nd:MgO:LiNbO_3同时兼作激活介质和非线性光学材料,研究自倍频激光器。用小型氙灯泵浦,在室温下获得二次谐波激光(0.547μm) 阈值小于4.8'J,最大输出400μJ/shot,工作温度范围大于20℃～45℃,无光损伤。     

微微秒自动调谐参量激光的研究

采用一对MgO:LiNbO_3角度调谐覆盖了红近外波段0.7～2.2μm,并配以自动波长扫描。文中分析了影响脉冲宽度与线宽的因素,与实验结果相吻合。脉宽<30ps,线宽～1nm(简并波长附近～10nm),单脉冲峰功率达MW级,参量光总能量转换效率达5.4％。     

停流—荧光动力学分析法测定痕量钛的研究

利用自行组装的停流-荧光动力学分析仪,采用停流法汇合流体动力注入技术,研究了钛与3.5-二溴水杨基荧光酮的荧光增强动力学反应性质,讨论了流速、进样时间对方法灵敏度和精密度的影响,提出了一个快速、简便、精确测定钛的分析方法,并用于稀土样品及合成样品中痕量钛的测定.方法检测限为8×10~(-3)ppm,大多数元素的干扰均可用动力学方法消除.     

I_3─半群是幂零的若干充要条件

本文通过半群的代数理论给出了Ｉ＿３—半群是幂零的若干等价条件，并且导出几类是幂零的Ｉ＿３－半群