锂金属负极亲锂骨架的研究进展

随着电动汽车和便携式电子产品的快速发展, 人们对于高比能二次电池的需求越来越迫切. 锂金属以其极高的理论比容量和极低的电极电势被视为下一代高比能电池理想负极材料之一. 但是, 锂枝晶的生长及体积膨胀等问题限制了金属锂负极的实际应用. 在金属锂负极中引入三维骨架可以有效抑制锂枝晶生长, 缓解体积膨胀. 其中亲锂骨架可以降低锂的形核能垒, 诱导锂的均匀成核, 更加有效地调控锂沉积行为. 本文结合国内外的研究进展总结了锂金属负极中亲锂骨架的研究成果. 根据亲锂材料的不同对亲锂骨架进行了分类, 总结了各类亲锂骨架在调控锂沉积行为和提高电池性能方面取得的成果, 并对其今后的研究和发展进行了展望.     

固相烧结法制备锂离子电池正极材料Li2FeP2O7及其电化学性能研究

介绍了一种先冷冻干燥后固相烧结制备正极材料Li₂FeP₂O₇的方法. 利用X射线衍射(XRD)、 扫描电子显微镜(SEM)、 透射电子显微镜(TEM)和傅里叶变换红外光谱(FTIR)对材料的组成和形态进行表征, 并通过循环伏安曲线(CV)和电化学阻抗谱(EIS)研究了Li₂FeP₂O₇材料的电化学性能. 研究发现, 合成Li₂FeP₂O₇的最佳温度为590 ℃, 此温度下反应较完全且产物杂质较少, 1.6C倍率下的放电比容量达到55 mA·h·g^?1, 明显高于其它温度下合成样品的放电比容量. 该温度下合成的Li₂FeP₂O₇还具有低阻抗和较大的交换电流密度, 说明这种合成方式有利于提高锂离子在Li₂FeP₂O₇中的扩散.     

水溶液法原位构建ZnO亲锂层稳定锂-石榴石电解质界面

固态电池以其高安全性和高能量密度而备受关注。石榴石型固体电解质(LLZO)由于具有较高的离子导电性和对锂金属的稳定性,在固态电池中具有应用前景,但陶瓷与锂金属较差的界面接触会导致高的界面阻抗和可能形成的枝晶穿透。我们利用LLZO表层独特的H⁺/Li⁺交换反应,提出了一种简便有效的金属盐类水溶液诱发策略,在电解质表面原位构建ZnO亲锂层,界面处LiZn合金化实现紧密连续的接触。引入改性层后,界面阻抗可显著降低至约10Ω·cm²,对称电池能够在0.1mA·cm^-2的电流密度下实现长达1000h的长循环稳定性。匹配正极LiFePO₄(LFP)或LiNi_0.5Co_0.2Mn_0.3O₂(NCM523)的准固态电池在室温下能够稳定循环100次以上。     

锂金属电池用高浓度电解液体系研究进展

锂金属二次电池具有极高的能量密度,是下一代储能电池的研究热点。然而,金属锂负极在传统碳酸酯电解液1 mol·L^?1 LiPF6-EC/DEC(ethylene carbonate/diethyl carbonate)中充放电时,存在严重的枝晶生长和循环效率低下等问题,阻碍了其商业化应用。因此,开发与锂负极兼容的新型电解液体系是目前重要的研究任务。与传统稀溶液相比,高浓度电解液体系具有独有的物化性质和优异的界面相容性,并且能有效抑制锂枝晶生长、显著提升锂负极的循环可逆性,因而格外受到关注。本文综述了高浓度电解液及局部高浓电解液体系的最新研究进展,分析了其溶液化学结构和物化性质,对其与锂负极的界面相容性、枝晶抑制效果、效率提升能力及界面稳定性机制进行了探讨;文章着重介绍了高浓与局部高浓电解液体系在锂金属二次电池中的应用,同时从基础科学研究和应用研究两个层面对高浓电解液和局部高浓电解液存在的主要问题进行了简要分析,并对其未来发展方向进行了展望。     

铝掺杂及钨酸锂表面包覆双效提升富锂锰基正极材料的循环稳定性

采用溶胶-凝胶法合成Al掺杂富锂锰基Li_1.2Mn_0.54-xAl_xNi_0.13Co_0.13O₂（x=0、0.03）锂离子电池正极材料,之后采用一步液相法制备Li₂WO₄包覆层,系统地研究了Al掺杂和Li₂WO₄包覆双效改性对富锂锰基正极材料电化学性能的影响.结果表明,Al掺杂后明显提升富锂锰基正极材料的循环稳定性,包覆层Li₂WO₄明显改善其倍率性能和放电平台电压衰减问题.Li₂WO₄包覆量为5% Li_1.2Mn_0.51Al_0.03Ni_0.13Co_0.13O₂正极材料在2.0~4.8 V充放电电压区间及1000 mA·g^-1电流密度下比容量仍高达110 mAh·g^-1左右,同时在100 mA·g^-1的电流密度下循环300次容量保持率为78%,而且循环过程中放电平台电压衰减也明显减缓.该工作为解决锂离子电池富锂锰基正极材料循环稳定性和平台电压衰减提供了新的思路.     

磷酸锂原位包覆富锂锰基锂离子电池正极材料

本工作通过“碳酸盐共沉淀-沉淀转化-固相反应”方法,实现磷酸锂原位包覆和改性富锂锰基锂离子电池正极材料Li_1.2Mn_0.54Co_0.13Ni_0.13O₂,研究了磷酸锂包覆层的形成过程及其对电化学性能的影响.结果显示,碳酸盐前驱体经沉淀转化反应原位形成磷酸镍包覆层,与锂源混合煅烧,最终转化为厚度小于30 nm的磷酸锂包覆层.该材料组装的半电池在125 mAh·g^-1电流密度下循环175圈后容量达191.1 mAh·g^-1,容量保持率为81.8%,平均每圈电压衰减仅为1.09 mV.磷酸锂包覆层缓解了材料表面与电解液之间的副反应,抑制了不可逆相变和过渡金属溶出,同时磷酸锂作为锂离子导体促进锂离子传输.本工作表明沉淀转化法原位包覆磷酸锂是提升富锂锰基正极材料性能的有效途径.     

Recent advances in metal-organic frameworks for lithium metal anode protection

The lithium metal battery has been considered as a promising candidate for next generation batteries.However,safety concerns caused by uncontrollable lithium dendrite growth on lithium anode are severely hampering the commercial application.Metal-organic frameworks(MOFs)become one of the most attractive materials due to the high porosity,structural designability and tunability.With unique open channels and pores as well as functional components in MOFs,the transportation and deposition of lithium ions can be regulated,which leads to enhanced electrochemical prope rties.Various strategies for lithium metal protection are proposed in recent wo rks on applications of MOFs in lithium metal batteries.In this review,we highlight latest key approaches in this field and discuss the prospects for MOFs in advanced Li anodes.     

Recent Advances in Atomic-scale Storage Mechanism Studies of Two-dimensional Nanomaterials for Rechargeable Batteries Beyond Li-ion

Developing new types of rechargeable batteries with high energy densities and low cost have received increasing attentions, aiming to reduce the dependence on high-priced lithium. Beyond Li-ion batteries, the potential alternatives including Na-ion batteries, Li-S batteries and Li-air batteries have been investigated recently, which are required to be viable for commercial applications. From this point of view, to understand the electrochemical reaction mechanisms and kinetics of these batteries has become the key challenge to make breakthroughs in the field of new energy storage. In this review, we present a critical overview of the two dimensional nanomaterials-based batteries (except Li-ion-based batteries) that could meet such demonds. To develop new energy storage devices with more promising performances, the microstructure evolution and atomic scale storage mechanism of these batteries are comprehensively summarized. In addition, the major challenges and opportunities of advanced characterization techniques are finally discussed. We do hope that this review will give the readers a clear and profound understanding of the electrochemical reaction mechanisms and kinetics of the as-discussed batteries, thus effectively contributing to the smart design of future-generation energy storage devices.     

A Highly Efficient All‐Solid‐State Lithium/Electrolyte Interface Induced by an Energetic Reaction

The energetic chemical reaction between Zn(NO₃)₂ and Li is used to create a solid‐state interface between Li metal and Li_6.4La₃Zr_1.4Ta_0.6O₁₂ (LLZTO) electrolyte. This interlayer, composed of Zn, ZnLi_x alloy, Li₃N, Li₂O, and other species, possesses strong affinities with both Li metal and LLZTO and affords highly efficient conductive pathways for Li⁺ transport through the interface. The unique structure and properties of the interlayer lead to Li metal anodes with longer cycle life, higher efficiency, and better safety compared to the current best Li metal electrodes operating in liquid electrolytes while retaining comparable capacity, rate, and overpotential. All‐solid‐state Li||Li cells can operate at very demanding current–capacity conditions of 4 mA cm^?2–8 mAh cm^?2. Thousands of hours of continuous cycling are achieved at Coulombic efficiency >99.5 % without dendrite formation or side reactions with the electrolyte.     

江西丰城市汉族8对遗传性状的基因频率

为探究江西汉族部分遗传性状基因频率分布的特征,采用随机抽样方法对江西丰城市372例(男233例,女139例)汉族人群的眦褶、眼睑、鼻梁类型、鼻孔形状、下颌类型、耳垂类型、额头发际、发形8对遗传性状进行了调查.结果显示:眦褶、头发类型性别间差异有统计学意义;眼睑、鼻梁形状性别间差异有统计学意义;鼻孔、下颌、耳垂、发际性别间差异无统计学意义;内眦褶、鼻孔形状民族间差异较大,耳垂、下颌、发际、发形次之,鼻梁类型、眼睑民族间差异较小;与其它13个民族进行聚类分析结果显示,遗传性状的基因频率分布具有一定的地域性.