新型交叉孔道式平板热管的性能研究

提出了一种设计交叉孔道式平板热管的新思路,按照这种方法设计加工的新型结构的平板热管均热器具有较强的轴向和径向导热能力,能明显减小导热热阻;特殊的孔道结构增强了毛细作用力,能有效强化相变换热。实验测试了不同热流密度和不同充液率下该热管正常工作时的稳态温度分布,给出了不同充液率和不同热流下的热阻,得到了热管的最佳充液率,证...     

热管冰蓄冷结构设计

从技术角度研究和探讨了热管做为冰蓄冷装置的适用性;对各种热管用金属管材与工质的特性进行了科学比较;从而最终确定了适宜冰蓄冷工作的热管管材、热管工质及其基本尺寸;为热管冰蓄冷装置的深入研究及推广应用,提供了强有力的理论依据。     

ELECTRON GUN FOR LARGE ORBIT GYROTRON (LOG) WITH DECREASED INFLUENCE OF CATHODE PLASMA ON ELECTRON BEAM PROPERTIES

High power Large Orbit Gyrotron (LOG) [1] is now under development at FIR FU. First version of this device was recently manufactured and then assembled with power supply ETIGO-IV [2]. Results of preliminary tests of electron-optic system are presented. The conditions when stableflat form of current pulse realized are discussed. Analytical estimations of cathode-anode distance to achieve small influence of cathode plasma during high voltage (HV) pulse are performed. Two new electron gun versions with decreased influence of the cathode plasma on its impedance and pulse form are suggested and optimized. New optimal magnetic field distributions are found. First gun has quiasi-flat cathode configuration near the anode diaphragm and provides operating current about 60 A. Second one uses blade cathode with operating current about 30 A. Beam quality for both guns is suitable for LOG operation.     

烧结金属纤维板大空间自然对流实验研究

实验研究了烧结金属纤维板在大空间下的自然对流换热,分析了倾角、孔隙率、纤维丝经、Ra数和金属纤维导热系数对换热性能的影响.实验结果表明:存在最优的角度(60°左右)使烧结金属纤维板的自然对流换热性能最好,但倾斜角度对烧结金属纤维板的换热影响没有光板显著;加热面的平均Nu数随着纤维直径和孔隙率的增加均先增加后减小;在实验...     

Predictions and experimental studies of the tail pipe noise of an automotive muffler using a one dimensional CFD model

The tail pipe noise from a commercial automotive muffler was studied experimentally and numerically under the condition of wide open throttle acceleration in the present research. The engine was accelerated from 1000 to 6000 rpm in 30 s at the warm up condition. The transient acoustic characteristics of its exhaust muffler were predicted using one dimensional computational fluid dynamics. To validate the results of the simulation, the transient acoustic characteristics of the exhaust muffler were measured in an anechoic chamber according to the Japanese Standard (JIS D 1616). It was found that the results of simulation are in good agreement with experimental results at the 2nd order of the engine rotational frequency. At the high order of engine speed, differences between the computational and experimental results exist in the high revolution range (from 5000 to 6000 rpm at the 4th order, and from 4200 to 6000 rpm at the 6th order). According to these results, the differences were caused by the flow noise which was not considered in the simulation. Based on the theory of one dimensional CFD model, a simplified model which can provide an acceptable accuracy and save more than 90% of execution time compared with the standard model was proposed for the optimization design to meet the demand of time to market.     

热管式吸附床制冷性能的实验研究

利用高效热管作为吸附床的传热部件,有效地提高了船用柴油机废气的热量回收。本文将热管式吸附床与传统的壳管式吸附床进行了性能对比。同时,选择氯化钙-氨作为吸附工质对,通过实验测定解吸、吸附过程的变化情况。本文的研究结果表明,采用热管式吸附床使得初始解吸和吸附速率有明显提高,从而有效缩短解吸和吸附周期,并能有效提高系统的SCP和COP。     

Testifying experiment of the multi-pulse phenomena of capillary discharge soft-X-ray laser

In a capillary discharge experiment for the neon-like argon lasing, we have proposed an experimental scheme to verify that the multi-spike of X-ray diode (XRD) signal is a multi-pulse laser or is a reflection of the laser pulse in the XRD.The ceramic capillary has an inner diameter of 3mm and a length of 200mm.At the gas pressure of 28Pa and discharge current of 27kA, stable lasing has been realized.The experimental results prove that the multi-spike of XRD signal is a reflection of the electromagnetic signal produced by the laser pulse in the XRD.The improved electrocircuit scheme of the XRD to minimize the reflection phenomena is also found.     

Effective thermal conductivity of granulated two-phase systems at interstitial air pressures

Considering the htermal conduction through molecular collisions an expression for the effective thermal conductivityλ _e of loose and granular two-phase materials at different interstitial air pressure has been derived. The dependence ofλ _e on pore and particle sizes, characteristic pressure and radiative heat transfer is also discussed. Calculated values ofλ _e of glass beads and loose building materials are compared with reported results.     

Optimising time-varying gradient orientation for microstructure sensitivity in diffusion-weighted MR

Here we investigate whether varying the diffusion-gradient orientation during a general waveform single pulsed-field gradient sequence improves sensitivity to the size of coherently oriented pores over having a fixed orientation. The experiment optimises the shape and the orientation of the gradient waveform in each of a set of measurements to minimise the expected variance of estimates of the parameters of a simple model. A key application motivating the work is measuring the size of axons in white matter. Thus, we use a two compartment white matter model with impermeable, single-radius cylinders, and search for waveforms that maximise the sensitivity to axon radius, intra-cellular volume fraction and diffusion constants. Output of the optimisation suggests the only benefit of allowing the gradient orientation to vary in the plane perpendicular to the cylinders is that we can gain perpendicular gradient strength by maximising two orthogonal gradients simultaneously. This suggests that varying orientation in itself does not increase the sensitivity to model parameters. On the other hand, the variation in a plane containing the parallel direction increases the sensitivity significantly because parallel sensitivity improves the diffusion constant estimates. However, we also find that similar improvement in the estimates can be achieved without optimising the orientation, but by having one measurement in the parallel and the rest in the perpendicular direction. The optimisation searches a very large space where it cannot hope to find the global minimum so we cannot make a categorical conclusion. However, given the consistency of the results in multiple reruns and variations of the experiments reported here, we can suggest that for probing coherently oriented systems, pulse sequences with variable orientation, such as double-wave vector sequences, do not offer more advantage than fixed orientation sequences with optimised shape. The advantage of varying orientation is however likely to emerge for more complex systems with dispersed pore orientation.