Profiling analysis of oligosaccharides in antibody pharmaceuticals by capillary electrophoresis

Carbohydrate chains in glycoprotein pharmaceuticals have important roles for the expression of their biological activities. Therefore, development of an assessment method for the carbohydrate chains is an important parameter for quality control of glycoprotein pharmaceuticals such as newly developed therapeutic antibodies. In this report, we applied capillary electrophoresis with laser-induced fluorescence detection to the analysis of carbohydrate chains after releasing with glycoamidase followed by derivatization with 3-aminobenzoic acid. We found that four major oligosaccharides present in antibody pharmaceuticals were successfully separated with good resolution. The present method showed good precision in both migration times and relative peak areas, and gave comparable accuracy with that using a derivatization method with 8-aminopyrene-1,3,6-trisulfonate.     

铽-聚二甲基硅氧烷配合物的荧光特性

用多种谱学方法证明聚二甲基硅氧烷(PDMS)中的氧原子能与Tb3+键合生成Tb3+和PDMS的配合物(Tb3+-PDMS), 并发现生成配合物后, PDMS和Tb3+的荧光发射同时得到增强. 荧光强度的增强与配合物中Tb3+含量有关, 当配合物中Tb3+的含量为2.0%(w)时, 配合物的荧光强度最大, 可增强1547%左右.     

Iridium Anodic Oxidation to Ir(III) and Ir(IV) Hydrous Oxides

Iridium oxide films (IROFs) are known to have an enhanced or the so‐called super‐Nernstian (<59 mV/pH) pH‐sensitivity. The intention in the present study was to find out the reasons of such behavior and also to elucidate the nature of iridium anodic oxidation processes. The methods employed were combined cyclic voltammetry and chronopotentiometry. Iridium layers of 0.1 to 0.2 μm thickness, deposited thermally on titanium or gold‐plated titanium substrates, were used for investigations. IROFs on the surface of working electrodes were formed anodically by applying a constant potential in deaerated and oxygen‐containing solutions of 0.5 M H₂SO₄, 0.1 M KOH and 0.5 M H₃PO₄+KOH. Linear pH‐dependences of the stationary open‐circuit potential with the slopes close to 59 mV/pH were found for iridium electrode oxidized at 0.4 V–0.8 V (RHE) in deaerated and at 0.8 V–1.2 V (RHE) in O₂‐containing solutions. They were attributed to reversible Ir/Ir(OH)₃ and Ir/ IrO₂?nH₂O metal‐oxide electrodes, respectively. It has been suggested that the main current peaks seen in the voltammograms of iridium electrode in acid and alkaline solutions are of different nature. The difference between iridium electrode surface states in acid and alkaline solutions has been presumed to be the main reason of super‐Nernstian pH‐sensitivity of the IROFs. On the basis of the results obtained standard potential of Ir/Ir(OH)₃ electrode and the solubility product of Ir(OH)₃ have been evaluated: =0.78±0.02 V and K_sp=3.3×10^?64.     

[H2en]2{La2M(SO4)6(H2O)2} (M=Co, Ni): First organically templated 3d-4f mixed metal sulfates

The first organically templated 3d-4f mixed metal sulfates, [H₂en]₂{La₂M(SO₄)₆(H₂O)₂} (M=Co 1, Ni 2) have been synthesized and structurally determined from non-merohedrally twinned crystals. The two compounds are isostructural and their structures feature a three-dimensional anionic network formed by the lanthanum(III) and nickel(II) ions bridged by sulfate anions. The La(III) ions in both compounds are 10-coordinated by four sulfate anions in bidentate chelating fashion, and two sulfate anions in a unidentate fashion. The transition metal(II) ion is octahedrally coordinated by six oxygens from four sulfate anions and two aqua ligands. The doubly protonated enthylenediamine cations are located at the tunnels formed by 8-membered rings (four La and four sulfate anions).     

La1-xCaxCrO3体系复合氧化物的甘氨酸-硝酸盐法合成与表征

采用甘氨酸-硝酸盐法(GNP)合成了La1-xCaxCrO3 (x=0～0.3)体系复合氧化物粉料,对合成产物的粉体结构和性能进行了表征,研究了体系组成及合成方法对材料烧结性能和导电性能的影响.实验结果表明,在La1-xCaxCrO3体系中Ca2 离子的引入促进了材料的烧结,随着Ca2 离子含量的增加,材料的烧结致密度和导电性能明显提高.与常规固相法相比,GNP法合成的粉料颗粒细小均匀(100～200 nm),烧结活性高,其烧结体在1400 ℃以下即可达到较高的烧结致密度和良好的电性能.     

金属载体催化剂的涂层研究

在高温氧化处理不同时间的金属载体箔片上涂覆MgAl2O4/Al2O3过渡涂层,利用TG-DSC,XRD,SEM,BET和超声振动等分析测试技术,对载体和涂层的微观结构与表面特性进行研究.结果表明,在950 ℃下高温氧化5 h,箔片表面生成板状Al2O3晶须,有利于增强涂层与箔片的附着力.在载体表面涂覆一层MgAl2O4/Al2O3过渡涂层,有助于提高活性组分与金属载体的结合力,可以获得高结合强度的涂层结构,促使活性元素高度分散.     

Methane Decomposition in a Barium Titanate Packed-Bed Nonthermal Plasma Reactor

The behavior of lattice oxygen species of the ferroelectric material during methane oxidation was investigated using a nonthermal plasma reactor packed with BaTiO ₃ pellets. Lattice oxygen species in BaTiO ₃ play an important role in the formation of N ₂ O and the oxidation of CH ₄ . The oxidation products such as CO and CO ₂ were formed from independent reaction pathways. Lattice oxygen species were able to preferentially oxidize the carbon species deposited on the pellet surface into CO. Also, N ₂ O and NO _x were independently formed in the N ₂–O ₂ reaction, suggesting that different oxygen species give N ₂ O and NO _x. N ₂ O was produced by the oxidation of molecular nitrogen with lattice oxygen species.     

Emission,Emissionslebensdauer und Absorption von [Cr urea6]X3-Einkristallen

Emission and absorption polarization spectra as well as emission lifetimes between room temperature and 5 °K have been measured of [Cr urea₆]X₃ single crystals, where X stands for ClO ₄ ^– , J^–, NO ₃ ^– , Br^–, Cl^–, F^–, and X₃ for JSO ₄ ^3– . The strong temperature dependence of the fluorescence/phosphorescence-ratios, and of the emission lifetimes is discussed. The differences between the spectra as well as the emission lifetimes of the various salts can be attributed to an anion dependent trigonal perturbation.

Die Autoren danken dem Verband der Chemischen Industrie für finanzielle Unterstützung dieser Arbeit.     

Enantioselective syntheses of no-carrier-added (n.c.a.) (s)-4-chloro-2-[f] fluorophenylalanine and (s)-(α-methyl) -4-chloro-2-[f]fluorophenylalanine

(S)-4-Chloro-2-fluorophenylalanine and (S)-(α-methy)-4-chloro-2-fluorophenylalanine were synthesized and labeled with no carrier added (n.c.a.) fluorine-18 through a radiochemical synthesis relying on the highly enantioselective reaction between 4-chloro-2-[¹⁸F]fluorobenzyl iodide and the lithium enolate of (2S)-1-(tert-butyloxycarbonyl)-2-(tert-butyl)-3-methyl-1,3-imidazolidine-4-one for (S)-4-chloro-2-[¹⁸F]fluorophenylalanine and (2S,5S)-1-(tert-butyloxycarbonyl)-2-(tert-butyl)-3,5-dimethyl-1,3-imidazolidine-4-one for (S)-(α-methyl) -4-chloro-2-[¹⁸F] fluorophenylalanine. Quantities of about 20–25 mCi were obtained at the end of sy nthesi s, ready for injection after hydrolysis and high performance liquid chromatography (HPLC) purification, with a radiochemical yield of 17%–20% corrected to the end of bombardment after a total synthesis time of 90–105 min from [¹⁸F] fluoride. The enantiomeric excesses were shown to be 97% or more for both molecules without chiral separation and the radiochemical and chemical purities were 98% or better.     

A Mild Isomerization Reaction for β,γ‐Unsaturated Ketone to α,β‐Unsaturated Ketone

A series of β,γ‐unsaturated ketones were isomerized to their corresponding α,β‐unsaturated ketones by the introduction of DABCO in iPrOH at room temperature. The endo‐cyclic double bond (β,γ‐position) on ketone was rearranged to exo‐cyclic double bond (α,β‐position) under the reaction conditions.