Electrochemical hydrogen storage properties of melt-spun Ti0.9Zr0.1V0.2Ni1.5La0.5 alloy

The Ti_0.9Zr_0.1V_0.2Ni_1.5La_0.5 alloy samples were synthesized by melt-spinning technique at the different wheel velocity (cooling rate), and the structure and electrochemical hydrogen storage properties were investigated. The result indicated that the structure of the melt-spun ribbons mainly contains C14 Laves phase and V-based solid solution phase. The discharge capacity, cyclic stability, high-rate discharge ability and electrochemical kinetic of the alloy electrodes are correlated with the cooling rate (wheel velocity), and the maximum discharge capacity is over 200 mA·h/g at the wheel velocity of 20 m/s.     

白光LED用Ba3La（PO4）3∶Dy3+荧光粉的制备与发光性能

通过高温固相法合成了一系列Ba3La1-x(PO4)3∶xDy3+荧光粉材料。利用XRD测量样品的物相,结果显示样品为纯相Ba3La(PO4)3晶体。样品的激发光谱由一系列宽谱组成,峰值分别位于322,347,360,386,424,451 nm。在347 nm激发下,荧光粉在482 nm(4F9/2→6H15/2)和575 nm(4F9/2→6H13/2)处有很强的发射。研究了不同Dy3+掺杂浓度对样品发射光谱的影响,当Dy3+摩尔分数x=0.10时出现猝灭现象,浓度猝灭机理为电偶极-电偶极相互作用。确定了不同Dy3+掺杂浓度的Ba3La(PO4)3∶Dy3+的荧光寿命。Ba3La(PO4)3∶Dy3+荧光粉发射光谱的色坐标位于白光区域。     

蓝色长余辉光致荧光粉的研究

高温固相反应合成了蓝色长余辉光致荧光材料CaAl2O4∶Eu2 ,Nd3 ,La3 ,激发后在暗室中观察,余辉的颜色为蓝色。进行了添加辅助激活剂的实验,首次在CaAl2O4∶Eu2 ,Nd3 中添加La3 。测定了该长余辉材料的激发光谱、发射光谱、余辉亮度和可视余辉时间,并对长余辉发光机理进行了探讨。余辉发射光谱的峰值波长为440nm,可视余辉时间达到18h以上。波长为280~380nm的光都可将该材料激发。实验结果表明,添加辅助激活剂La3 ,延长了CaAl2O4∶Eu2 ,Nd3 的可视余辉时间。在CaAl2O4∶Eu2 ,Nd3 ,La3 中,Eu2 是发光离子,Nd3 和La3 是辅助激活剂,发射光谱由Eu2 的激发态4f65d到基态4f7的电子跃迁产生。     

Superconductivity in non-stoichiometric and tin-substituted La2CuO4: preparation, characterization, Mössbauer and microwave-absorption studies

Two samples of non-stoichiometric La₂CuO₄ were synthesized, one with La/Cu<2, and the other with 10% Sn substituting Cu. They were investigated by X-ray diffraction, Mössbauer spectroscopy, and microwave-absorption techniques. The microwave-absorption data indicated that they were both superconducting, with the transition temperatures T_c of 40.5 and 41.5 K, the one doped with Sn possessing the higher T_c. The Mössbauer spectra revealed that there exist two kinds of Sn(IV) atoms disordered with Cu. Their isomer shift, δ=−0.244(4) mm/s, is in agreement with Sn(IV) coordinated by oxygen. One site was characterized by a single Mössbauer line, being associated with a weakly distorted environment, wherein the Sn, coordinated more symmetrically, is surrounded by four Cu²⁺ ions. On the other hand, the other site, characterized by a Mössbauer doublet exhibited a quadrupole splitting Δ=1.07(2) mm/s, being associated with a highly distorted coordination, explained to be due to Sn occupying two adjacent cationic sites. To our knowledge, such a substitution for copper ions not resulting in a decrease of T_c has not been reported previously.     

Low-energy spectrum and finite temperature properties of quantum rings

Recently it was demonstrated that the rotational and vibrational spectra of quantum rings containing few electrons can be described quantitatively by an effective spin-Hamiltonian combined with rigid center-of-mass rotation and internal vibrations of localized electrons. We use this model Hamiltonian to study the quantum rings at finite temperatures and in presence of a nonzero magnetic field. Total spin, angular momentum and pair correlation show similar phase diagram which can be understood with help of the rotational spectrum of the ring. Received 18 January 2002 Published online 13 August 2002     

可聚合型溶致液晶单体3,4,5-三(11-十一烷氧丙烯酰氧基)苯甲酸钠的自组装及紫外光固化性能

以3,4,5-三羟基苯甲酸为原料,依次经过酯化、醚化、酰氯化和钠盐化四步反应合成一种可聚合型溶致液晶单体3,4,5-三(11-十一烷氧丙烯酰氧基)苯甲酸钠,并对其结构进行了傅里叶变换红外与1H核磁表征. 在室温下研究了该单体在水中的自组装行为,组装体结构通过偏光显微镜与X射线衍射仪进行表征. 研究表明,单体与水比例为80:20时可自组装为层状(La)相,92:8时组装为反六方(H_II)相,这与临界堆积参数的理论计算相吻合,表明单体浓度是影响组装体结构的重要因素. 在组装的基础上研究了含不同光引发剂的溶致液晶体系的双键转化率及固化后组装体结构的保留. 经实时红外表征及溶胶-凝胶法的验证发现在光强为30 mW/cm²的365 nm下曝光30 min,含引发剂Darocur2959的溶致液晶体系双键转化率可达78%. 聚合之后La相与H_II相的纳米结构都得到了保留.     

转镜式高速扫描相机时间分辨率的测定

 介绍了产生时间分辨率的原因，测量时间分辨率在高速摄影中的作用，前人曾做过的工作，时间分辨率测定的难点；着重介绍了新的测量方法，给出了实际测定的结果。结果表明，对于GSJ型相机，时间分辨率可达8.6 ns，测量的均方根误差为1.1 ns。     

超导氧化物La1.85Sr0.15CuO4/超高分子量聚乙烯复合材料的输运性质

采用热压法获得了具有不同混合比例的超导氧化物La1.85Sr0.15CuO4/超高分子量聚乙烯导电复合材料,并利用x射线衍射、扫描电子显微镜和标准四引线方法对复合材料的结构和低温电输运性质进行测量.实验结果显示,超导氧化物La1.85Sr0.15CuO4颗粒随机分布在聚合物本体中,相互间没有连接构成网络结构.在正常态下,复合材料的电阻-温度变化曲线给出类半导体行为.但对应于超导氧化物La1.85Sr0.15CuO4的超导转变温度Tc处,复合材料的电阻-温度变化曲线出现了极小值.室温下电阻率ρ随外加电场强度E的变化曲线测量结果表明,ρ-E曲线为一线形关系,随着电场强度E增加,电阻率ρ下降.文中对可能存在的导电机制进行分析,结果表明隧道贯穿模型可以很好地解释复合材料的导电机制.另外,外加电场强度E对复合材料的电输运特性有明显的影响.     

Transport properties of a single-quantum dot Aharonov-Bohm interferometer

We consider a two-terminal Aharonov-Bohm (AB) interferometer with a quantum dot inserted in one path of the AB ring. We investigate the transport properties of this system in and out of the Kondo regime. We utilize perturbation theory to calculate the electron self-energy of the quantum dot with respect to the intradot Coulomb interaction. We show the expression of the Kondo temperature as a function of the AB phase together with its dependence on other characteristics such as the linewidth of the ring and the finite Coulomb interaction and the energy levels of the quantum dot. The current oscillates periodically as a function of the AB phase. The amplitude of the current oscillation decreases with increasing Coulomb interaction. For a given temperature, the electron transport through the AB interferometer can be selected to be in or out of the Kondo regime by changing the magnetic flux threading perpendicular to the AB ring of the system.     

La1/3Sr2/3Fe1-xCoxO3体系中的Co替代效应研究

本文通过对La1/3Sr2/3Fe1-xCoxO3系列样品进行X射线衍射(XRD)和变温电阻率(p～T)、比热(C～T)、磁化率(M～T)等测试,研究了Co掺杂对该系列样品的晶体结构和电热磁性质的影响.结果表明,随着Co掺杂量的增加,晶胞体积单调减小;电阻中电荷有序(charge ordering,CO)的特征逐渐消失.Co含量低的样品随着温度降低发生顺磁-反铁磁(PM-AFM)转变和金属-绝缘体(M-I)转变;Co含量高的样品则在磁转变温度以下表现出团簇玻璃型短程铁磁有序行为,并且在整个测量温区内具有金属导电特性.这些证明Co掺杂引起电子的局域化效应是导致体系电磁和输运行为发生变化的主要原因.