Dimethyl carbonate as a novel methylating reagent for fatty acids in analytical pyrolysis

Dimethyl carbonate (DMC) was investigated as a mild, harmless and odorless reagent for pyrolytic methylation of fatty acids. Soybean oil was selected as test material for its high content of (poly)unsaturated fatty acids. Pyrolyses were performed at 500, 700 and 900 degrees C by means of a heated platinum filament pyrolyser on-line and off-line to the GC-MS apparatus. Methyl esters of palmitic, linoleic, oleic and stearic acid were formed as prominent products from off-line pyrolysis of soybean oil in the presence of DMC and zeolite 13X. Fatty acid methyl esters (FAMEs) were not observed at important levels in the absence of zeolite, while on-line Py-GC-MS experiments resulted principally in the formation of free fatty acids and hydrocarbons. The FAME profiles obtained from the DMC/zeolite off-line pyrolysis were compared to those resulting from tetramethylammonium hydroxide (TMAH) thermochemolysis and BF3-methanol procedure. The observed differences between pyrolysis and methanolysis methods were principally attributed to the thermal degradation of unsaturated fatty acids. The effectiveness of the DMC/zeolite pyrolytic methylation was further demonstrated by the analysis of tripalmitine and soybean seeds.     

Generic method for systematic phase selection and method development of biochromatographic processes. Part I. Selection of a suitable cation-exchanger for the purification of a pharmaceutical protein

Even if the first protein therapeutics are now for more than 20 years on the market the selection of suitable adsorbents for the preparative downstream processing (DSP) of these biomolecules as well as the method development towards process conditions are still based mainly on 'trial and error'. Therefore, theses processes are not perfectly efficient, but indeed very time consuming and laborious. In this study a novel systematic method is introduced to find a suitable adsorbent (not necessarily the best one) with appropriate separation parameters for a specific separation with reduced effort. Following this strategy, the adsorbents must first be packed into columns under preparative conditions and then characterized completely with regard to, e.g. pressure drop, k'-values, plate heights (HETP curves), selectivity and capacity by using test substances, which are similar in their characteristics (molecular mass, size, charge distribution, hydrophobicity) to the target proteins. With the database once determined, a preselection of most suitable adsorbents including separation parameters is made regarding chromatographic and also economical properties. After this, preparative experiments must be conducted with a reduced number of adsorbents to figure out the individual influence of side components. This approach is demonstrated for the separation of an exemplary industrial protein mixture using cation-exchange chromatography (CEX). Characterization of different weak CEX-adsorbents is illustrated. After comparing these phases with each other, a first preselection and a prediction of suitable adsorbents is made. In the following preparative separation conditions (load, velocity, gradient) are determined for the preparative separations using the database and results of some additional experiments. The final comparison of separation performance in preparative scale confirms this selection and so the applicability of the new method.     

Characterization of low-molecular weight peptides in champagne wine by liquid chromatography/tandem mass spectrometry

This paper reports the use of an on-line LC–ESI–MS/MS method for the identification and quantification of di- and tripeptides in champagne wine without laborious sample pretreatment. The identification of these compounds, in their underivatised form, is based on identical retention times and ESI–MS spectra to those of reference standards. The presence of nine dipeptides (Arg–Ile, Ile–Arg, Ile–Val, Lys–Phe, Lys–Tyr, Phe–Lys, Tyr–Gln, Tyr–Lys, Val–Ile) and the absence of two tripeptides (Phe–Arg–Arg and Lys–Met–Asn) have been evidenced in the matrix. Calibration curves for each analyte were established using Phe–Arg as internal standard. The calibration curves were linear in the concentration range 0.1–10 mg L⁻¹ with a determination coefficient, r², better than 0.992. The accuracy for the calibration standard was estimated at between 92 and 102%. This method allows high recovery and satisfies the necessary requirements with respect to accuracy, repeatability and sensitivity. The first application of this analytical method to the measurement of di- and tri-peptides in different vintages of champagne wine is reported. Compositional changes in the peptides occurred depending on the vintage.     

Stability of anthocyanins extracted from grape skins

Summary The extractability and stability of anthocyanins from the skins ofVitis vinifera were determined at different pH values. Anthocyanins were extracted using acetone, partitioned with chloroform and pre-purified by solid-phase extraction (SPE). They were analysed by RP-HPLC, and the kinetic parameters of decomposition were calculated. The total monomeric anthocyanin content was determined by spectrophotometry. Anthocianins were well separated by RP-HPLC. The efficiency of extraction depended strongly on the pH of the extracting agent and on the character of the pigment to be extracted. The amount of anthocyanins decreased with increasing duration of storage, more so at elevated temperatures. Presented at Balaton Symposium '01 on High-Performance Separation Methods Siófok, Hungary, September 2–4, 2001.     

Analysis of propantheline bromide and related quaternary ammonium drugs by reversed-phase,ion-pair liquid chromatography with two counterions in the eluent

Summary The addition of appropriate concentrations of an organic amine and an alkylsulphonate to the mobile phase in reversed-phase, ion-pair liquid chromatography can introduce unique selectivity in to the chromatographic system allowing separation of complex mixtures of basic, acidic and neutral compounds. As an example, the methodology for a specific stability-indicating determination of propantheline bromide, a quaternary ammonium anticholinergic agent, on several reversedphase stationary phases, was developed. The retention mechanism was studied and it was concluded that both ion-interaction processes and ion-exchange processes were involved in the separation technique developed with two counterions of opposite charge in the eluent.     

Elution behavior of styrene oligomer fractions in supercritical fluid chromatography

Summary In supercritical fluid chromatography (SFC), the elution behavior of styrene oligomers in pentane depends greatly on the degree of oligomerization, n. The influence of capacity ratio, k, on the lower oligomers up to about n=11 resembles the behavior of other substrates of low molecular weight, like aromatic hydrocarbons. Thus, with pentane of 100 bar and below, minima are found in plots of k versus temperature. In contrast, the k of oligomers of higher molecular weight (n>11) increase monotonously with increasing temperature. The studies were performed using oligostyrene fractions obtained by semipreparative SFC fractionation.     

Influence of the peak height distribution on separation performances: Discrimination factor and effective peak capacity

Summary A new index of performance of the chromatographic separation between two adjacent peaks, the discrimination factor, d₀, is defined. It is normalized between 0 and 1 and is directly and easily determined from the chromatogram. It does not depend on any assumption regarding peak shape, except that the peak profiles of individual sample components have a single mode. Its value depends on the relative heights of the two peaks as well as on their separation. The separation power of a chromatographic system is classically measured by its peak capacity, defined on the basis of constant resolution between adjacent peaks. A previously developed statistical theory of the composition of mixtures makes it possible to extend the concept of peak capacity by taking into account the peak height distribution in typical average chromatograms. A new parameter, the effective peak capacity, is defined for this purpose on the basis of a constant discrimination factor between adjacent peaks. It allows to take into account the distribution of peak heights in statistical theories of the evaluation of complex chromatograms and in the measurement of the limit of determination in quantitative analysis. The characteristics of the two new parameters, the discrimination factor and effective peak capacity, are discussed and compared with those of their classical homologs, resolution and peak capacity, in the case of gaussian component peaks of equal widths.     

Purification of astilbin and isoastilbin in the extract of smilax glabra rhizome by high-speed counter-current chromatography

Purification of astilbin from the rhizome extract of Smilax glabra was conducted using a high-speed counter-current chromatograph equipped with a 700 mL column. In a single operation, 1.5 g of crude sample was separated to yield 105 mg of component astilbin and 48 mg of isoastilbin while the upper phase of the two-phase solvent system composed of n-hexane-n-butanol-water (1:1:2, v/v/v) was used for stationary phase. The chemical structures of the two flavonoid glycosides were confirmed by electrospray ionization ion trap multiple mass spectrometry and nuclear magnetic resonance experiments.     

An analytical solution of a newly proposed peak broadening equation and extension of polydispersities to higher molecular weight averages in size exclusion chromatography (SEC)

Summary Herein is reported an analytical solution to the peak broadening or peak dispersion/flattening equation based on the recently proposed Instrumental Spreading Shape Function and its application to correction for imperfect resolution (inadequate peak separation and/or excessive peak broadening) for higher molecular weight averages. The relationship of these higher MW averages with the familiar Weight Average and number average molecular weights is also discussed. Criteria for perfect resolution are specified and a true molecular weight calibration curve is accordingly defined.     

Gas-phase spectroscopy of the unstable sulfur diisocyanate molecule S(NCO)2.

Sulfur diisocyanate is generated from a heterogeneous reaction of gaseous sulfur dichloride with silver cyanate and studied for the first time in the gas phase. Combined with quantum chemical calculations, the electronic structure is characterized by photoelectron spectroscopy (PES). Simultaneously, an investigation of the possible ionization and dissociation processes for the molecular cation is presented based on experimental soft ionization mass spectrometry. From the calculated bond-dissociation energies, the dissociation pathway is determined. S(NCO)2+ undergoes 1,3-sigmatropic rearrangement with a smaller barrier height (9.9 kcal mol(-1)) than the neutral counterpart. Thus, the 1,3-sigmatropic rearrangement is preferred for the molecular cation, and OCNCO+ and NS+ is produced by subsequent dissociation of the rearrangement product. The analysis agrees very well with the experimental mass spectrum.