Structure and Photosynthetic Mimicking of Bis(2,6-bis(benzimidazol-2-yl)pyridine)manganese(II)

Introduction　　Manganeseionsplayanimportantroleinthelight in ducedoxidationofwatertomolecularoxygeninphotosys temII (PSII)ofgreenplants.1 3Inrecentyears ,man ganesecomplexesofpolypyridineligands ,suchasbipyri dine ,1,10 phenanthrolineand 2 ,2′:6′,2″ terpyridine ,havehadconsiderableattentionasthecomplexesformedareusefulmodelsformanganese containingbimolecu lars .4 6 Therefore ,synthesisandcharacterizationofman ganeseinitsvariousoxidationstates ,withvariousligandtypesandnuclearities ,hav…     

微波辐射下苯并(口恶)唑基吡啶的合成

含有苯并唑基的杂环化合物由于其特殊的生理活性而广泛用作医药、农药[1];因为具有较高的荧光量子产率,还可作为荧光增白剂、闪烁剂[2]等。现有合成方法反应时间长[3,4],而且需高温下进行。微波辐射下的有机合成具有反应时间短、产率高的特点[5]。本文在微波辐射条件下,利用邻氨基酚和吡啶羧酸的缩合反应,合成了2种苯并唑基取代吡啶。其优化反应条件为:多聚磷酸为催化剂,微波输出功率为500W,辐射时间4分钟。相比于常规反应,该条件下的反应速率是常规加热法反应速率的60倍且产率有所提高。合成路线如下:ppA=Polyphosphoricacid1　…     

Intramolecular proton transfer induced by divalent alkali earth metal cation in the gas state

Interactions between divalent alkali earth metal (DAEM) ions M (M?Be, Mg, Ca, Sr, Ba) and the second stable glycine conformer in the gas phase, which can transfer into the ground‐state glycine‐M²⁺ (except the glycine–Be²⁺) among each corresponding isomers when these divalent metal ions are bound, are studied at the hybrid three‐parameter B3LYP level with three different basis sets. Proton transfers from the hydroxyl to the amino nitrogen of the glycine without energy barriers have been first observed in the gas phase in these glycine–M²⁺ systems. The interaction between the glycine and these DAEM ions except beryllium and magnesium ion only create an amino hydrogen pointing to the original hydroxyl due to their weaker interaction relative to those divalent transition metal (DTM) ion‐bound glycine derivatives, being obviously different from that between the glycine and DTM ions, in which two amino hydrogens point to the original hydroxyl oxygen when these metal‐chelated glycine derivatives are produced. The interaction energy between the glycine and divalent magnesium would be the boundary of one or two amino hydrogens pointing to the hydrogyl oxygen, i.e., the ?170.3 kcal/mol of binding energy is a critical point. Similar intramolecular proton transfer has also been predicted for those DTM ion‐chelated glycine systems; however, that in the gas state has not been observed in the monovalent metal ion‐coordinated glycine systems. The binding energy between some monovalent TM ion and the glycine is similar to that of the glycine–Ba²⁺, which has the lowest binding strength among these DAEM–ion chelated glycine complexes. The difference among them only lies in the larger electrostatic and polarized effects in the latter, which favor the stability of the zwitterionic glycine form in the gas phase. According to these observations, we predict that the zwitterionic glycine would exist in the field of two positive charges in the gas phase. © 2003 Wiley Periodicals, Inc. Int J Quantum Chem 94: 205–214, 2003     

一种新型双亚胺吡啶铁系催化剂的乙烯低聚研究

线性α 烯烃广泛地应用于洗涤剂、增塑剂、润滑油等精细化学品的合成以及作为共单体制备线性低密度聚乙烯 (ＬＬＤＰＥ) .目前工业上主要是应用ＳＨＯＰ法[1] 、Ｃｈｅｖｒｏｎ工艺和Ａｍｏｃｏ工艺[2 ] 通过乙烯低聚制备 .近些年发展起来的新型高活性后过渡金属乙烯低聚催化剂能够高选择性地制备线性α 烯烃[3 ,4] .Ｂｒｏｏｋｈａｒｔ等[4] 的研究表明 ,对于双亚胺吡啶铁系乙烯聚合催化剂而言 ,配体上苯基的邻位取代基位阻减小可以实现乙烯低聚 ,并具有高活性、高选择性以及理想的低聚产物分布 .本文的工作是从配体的空间位阻效应对催化剂…     

An efficient synthesis of 2-(1-methyl-1,2,5,6-tetrahydropyridin-3-yl)morpholine: a potent M1 selective muscarinic agonist

2-(1-Methyl-1,2,5,6-tetrahydropyridin-3-yl)morpholine is useful for synthesizing potent antimicrobials including the arecoline derivatives, phendimetrazine and polygonapholine and was synthesised in nine steps with an overall yield of 36%. Bromination of 3-acetylpyridine and dehydration of a diol with cyclization were pivotal to the success of the strategy.     

2,6—双（1′—苯基—3′—甲基—5′—氧代—4′—甲酰吡唑）吡啶稀土配合物的合成

在乙醇－水溶液中合成了１４种２，６－双（１′－苯基－３′－甲基－５′－氧代－４′－甲酰吡啶）吡啶稀土配合物，元素分析确定其化学组成的ＲＥ２Ｌ３．ｎＨ２Ｏ并用紫外可见光谱、红外光谱，核磁共振谱，热分析，荧光光谱，摩尔电导等进行了表征。     

The effective use of substituted benzoic anhydrides for the synthesis of carboxamides

Various carboxamides are synthesized from the corresponding carboxylic acids and amines with high product-selectivities using 2-methyl-6-nitrobenzoic or 2,4,6-trichlorobenzoic anhydride in the presence of 4-(dimethylamino)pyridine.     

Synthesis of ortho-substituted cyanopyridines through lithio intermediate trapping

Ortholithiation of 4-cyanopyridine using 2,2,6,6-tetramethylpiperidide (LiTMP) and trapping the lithio intermediate with electrophiles represents an efficient and straightforward access to ortho-substituted-4-cyanopyridines. The cyano group can be used as an ortho-directing group and allows the preparation of 3-halogeno-4-cyanopyridines. Reactivity of 2- and 3-cyanopyridines is also investigated and seems to give similar results.     

Electrochemical investigation of hymecromone at a multi-wall carbon nano-tube/cetyl pyridine bromine composite film electrode

A multi-wall carbon nanotube (MWNT)/cetyl pyridine bromine (CPB) composite film modified glassy carbon electrode (GCE) was developed for the electrochemical determination of hymecromone in phosphonate buffer. Electrochemical behaviour of hymecromone at the composite film electrode was investigated with voltammetry. Compared with an irreversible oxidation of hymecromone at the bare GCE, the oxidation peak current was enhanced greatly at the film electrode. Some parameters such as pH, scan rate, accumulation potential and accumulation time were optimized. Under optimal conditions, an oxidation peak at 0.82 V was employed to determine hymecromone electrochemically. A linearity between the oxidation peak current and the hymecromone concentration was obtained in the range of 3.0 × 10⁻⁷ − 2.0 × 10⁻⁵ mol 1⁻¹ with a detection limit of 8.0 × 10⁻⁸ mol 1⁻¹. The proposed procedure was successfully applied to assay hymecromone in pharmaceutical formulation with satisfactory results. The text was submitted by the authors in English.     

Interpenetrating polymer networks of poly(carbonate-urethane) and polyvinyl pyridine

Simultaneous interpenetrating polymer networks (IPN's), pseudo IPN's, and liner blends of aliphatic poly(carbonate-urethane) (PCU) and polyvinyl pyridine (PVP) have been prepared and characterized by DSC, DMA, and TEM. The full IPN's of PCU and PVP had a single phase morphology only above 50 wt % PCU, as determined by both DSC and DMA and confirmed by transmission electron microscopy (TEM). However, in both pseudo IPN's of PCU and PVP and in their linear blends there exist multiple glass transitions and melting points seen by DSC and DMA indicating phase incompatibility. The full IPN's exhibited superior ultimate mechanical properties and solvent resistance as compared to the pseudo IPN's, liner blends, and the pure crosslinked PCU and PVP networks.