基于有限元法的面接触摩擦热流分配系数反推研究

本文基于有限元基础,利用红外测温-温度场有限元模拟-热电偶验证相结合的方法,反推得出摩擦副热流分配系数,分析了不同摩擦副材料、表面接触状况、散热条件对摩擦副热流分配系数的影响.分析表明:反推热流法为热流分配系数的计算提供了1个可行的方案;当摩擦副材料具有较好的减摩、抗黏着特性时,摩擦副运行稳定,摩擦副动态热流分配系数随时间变化平缓;摩擦副表面接触状况和散热条件对热流分配系数有明显的影响,利用本文提出的修正系数,可对理论公式进行修正.     

基于二阶双渐近法的双层圆柱壳在水下爆炸作用下的鞭状运动

针对潜艇在水下爆炸载荷下的鞭状运动,从波动方程出发,推导了二阶双渐近法后期近似,并结合声固耦合法初步解决了双层圆柱壳的内域问题,然后将其与显式有限元耦合形成了圆柱壳结构水下爆炸流固耦合分析方法。通过简单算例验证了本文分析方法的有效性和精度。最后,基于此方法分析了双层圆柱壳结构在水下爆炸载荷下的总体响应特性以及周期比和爆距比对其影响规律。     

双流体雾化液滴荷电特性分析

本文通过理论分析,提出了双流体荷电雾化过程中,增大电场强度或减小液滴粒径均能提高荷电效果的论点。针对不同的电极布置情况建立了数值模拟模型,计算结果表明,双流体喷嘴接地时,喷嘴与环状电极之间的电场强度比喷嘴不接地时大很多。通过实验,验证了电场强度、液滴粒径等参数对荷电效果的影响规律,在环状电极荷电情况下,双流体喷嘴接地时,液体荷质比高于双流体喷嘴不接地时的荷质比;电场强度增大,荷质比增加;液滴粒径越小,荷质比越大;在一定的电导率范围内,电导率越大,荷质比越小。实际喷雾中,运动液滴发生二次破碎的临界荷电量小于Rayleigh极限。     

含氮杂环类润滑油添加剂CoMFA-QSTR及CoMSIA-QSTR抗磨损性能模型的构建

依据摩擦学定量构效关系理论(QSTR),采用比较分子力场分析(CoMFA)和比较分子相似性指数分析(CoMSIA)这两种方法研究了含氮杂环类润滑油添加剂的抗磨损性能的摩擦学三维定量构效关系(3D-QSTR),并建立了相应的3D-QSTR模型.结果表明:仅利用静电场构建CoMFA或CoMSIA模型时,模型预测能力最好,r~2,q~2均大于0.5.根据CoMFA或CoMSIA模型等高线图分析得出:分子静电场对含氮杂环类润滑油添加剂的抗磨损性能影响最大,在特定区域的引入带负电荷或带正电荷的基团将有助于抗磨性能的提高.     

滚滑工况弹流反常温度场的研究

研究了弹流反常温度场的形成机理及影响因素，指出入口温升是压缩功发热和逆流剪切热所致，而出口局部低温是负压缩功吸热的结果，出口温度的再次微幅上升则是压缩功消失后剪切热作用的结果．研究结果表明，入口温升随载荷的增加而增大，随卷吸速度的增加显著升高而几乎与滑滚比无关；在高速小滑滚比工况下，接触区的最高温度有可能出现在入口位置；入口温升增加了材料在工作中经受高温的次数，对其接触疲劳寿命有不利影响；在保证润滑性能的前提下，适当减少供油量可以减小逆流，从而降低入口温升。     

电子封装、QFP和MCM热变形的实验及数值分析

0Introduction Anelectronicpackageisgenerallyconstructedwithanactivesiliconchip,mountisland,gold wires,leadframesandsoldersasshowninFig.1(a).Toprotectfromtheenvironment,thesilicon chipisusuallyencapsulatedinresin.SincethesematerialshavedifferentCTE(coeffic…     

Hahn-Tsai复合材料的非线性杂交应力有限元方法

成功建立了Hahn-Tsai复合材料模型的非线性杂交应力有限元方程,采用Newton-Raphson迭代法求解结构的非线性位移方程。在迭代过程中,为了提高计算效率可采用简单迭代法由节点位移求解单元应力场。但是,当载荷增加到一定程度以后,非线性应力场由于循环迭代而无法收敛,显然,一般的加速方法不能解决这种循环迭代的发散问题。因此,本文发展了一种确实有效的非线性应力场迭代新方法,在不增加计算工作量的情况下,不仅极大地提高了收敛速度,而且对于较大载荷也能够很好地收敛,从而解决了大载荷下非线性杂交元方法失败的关键问题。数值算例表明该方法是确实可行的。     

1H-NMR and LC-MS Based Metabolomics Analysis of Potato (Solanum tuberosum L.) Cultivars Irrigated with Fly Ash Treated Acid Mine Drainage

¹H NMR and LC-MS, commonly used metabolomics analytical platforms, were used to annotate the metabolites found in potato (Solanum tuberosum L.) irrigated with four different treatments based on FA to AMD ratios, namely: control (0% AMD; tap water), 1:1 (50% AMD), 3:1 (75% AMD is 75% FA: AMD), and 100% AMD (untreated). The effects of stress on plants were illustrated by the primary metabolite shifts in the region from δ_H 0.0 to δ_H 4.0 and secondary metabolites peaks were prominent in the region ranging from δ_H 4.5 to δ_H 8.0. The 1:3 irrigation treatment enabled, in two potato cultivars, the production of significantly high concentrations of secondary metabolites due to the 75% FA: AMD content in the irrigation mixture, which induced stress. The findings suggested that 1:1 irrigation treatment induced production of lower amounts of secondary metabolites in all crops compared to crops irrigated with untreated acid mine drainage treatment and with other FA-treated AMD solutions.     

Biofortification—A Frontier Novel Approach to Enrich Micronutrients in Field Crops to Encounter the Nutritional Security

Globally, many developing countries are facing silent epidemics of nutritional deficiencies in human beings and animals. The lack of diversity in diet, i.e., cereal-based crops deficient in mineral nutrients is an additional threat to nutritional quality. The present review accounts for the significance of biofortification as a process to enhance the productivity of crops and also an agricultural solution to address the issues of nutritional security. In this endeavor, different innovative and specific biofortification approaches have been discussed for nutrient enrichment of field crops including cereals, pulses, oilseeds and fodder crops. The agronomic approach increases the micronutrient density in crops with soil and foliar application of fertilizers including amendments. The biofortification through conventional breeding approach includes the selection of efficient genotypes, practicing crossing of plants with desirable nutritional traits without sacrificing agricultural and economic productivity. However, the transgenic/biotechnological approach involves the synthesis of transgenes for micronutrient re-translocation between tissues to enhance their bioavailability. Soil microorganisms enhance nutrient content in the rhizosphere through diverse mechanisms such as synthesis, mobilization, transformations and siderophore production which accumulate more minerals in plants. Different sources of micronutrients viz. mineral solutions, chelates and nanoparticles play a pivotal role in the process of biofortification as it regulates the absorption rates and mechanisms in plants. Apart from the quality parameters, biofortification also improved the crop yield to alleviate hidden hunger thus proving to be a sustainable and cost-effective approach. Thus, this review article conveys a message for researchers about the adequate potential of biofortification to increase crop productivity and nourish the crop with additional nutrient content to provide food security and nutritional quality to humans and livestock.     

Hitting probabilities and the Hausdorff dimension of the inverse images of a class of anisotropic random fields

Let X = {X(t):t ∈ R~N} be an anisotropic random field with values in R~d.Under certain conditions on X,we establish upper and lower bounds on the hitting probabilities of X in terms of respectively Hausdorff measure and Bessel-Riesz capacity.We also obtain the Hausdorff dimension of its inverse image,and the Hausdorff and packing dimensions of its level sets.These results are applicable to non-linear solutions of stochastic heat equations driven by a white in time and spatially homogeneous Gaussian noise and anisotropic Guassian random fields.