Synthesis of novel poly(ethylene glycol) supported benzazepines: the crucial role of PEG on the selectivity of an intramolecular Heck reaction

Poly(ethylene glycol) (PEG 3400) was used as a soluble polymeric support for the synthesis of a series of novel benzazepines. The key step for the preparation of these heterocycles was a phosphine-free palladium-catalyzed Heck reaction. Palladium nanoparticles formed during the course of the reaction were characterized. The presence of PEG 3400 influenced the outcome of the reaction in terms of selectivity.     

游离和溶胶-凝胶固定化甲醛脱氢酶酶促反应动力学的研究

采用溶胶-凝胶法对甲醛脱氢酶进行固定化，酶的包埋率超过了98％．在pH7附近、37℃下，以游离酶和固定化酶作催化剂，NADH为电子供体，进行了甲酸转化为甲醛的酶促反应．游离和固定化甲醛脱氢酶酶促反应都遵循Michaelis-Menten反应机理，用Dalziel提出的双底物酶促反应动力学方程进行拟合．固定化酶酶促反应速率为游离酶酶促反应速率的50％左右．固定化酶的动力学常数φ和米氏常数K高于游离酶，估计是凝胶基质孔中存在扩散效应所致．     

Organic functionalization of the surface of silica with arylsilanes. A new method for synthesizing organic-inorganic hybrid materials

Organic functionalization of a silica surface has been realized by employing arylsilanes. Grafting reactions of aryl(3-chloropropyl)dimethylsilanes (aryl = p-anisyl, p-tolyl, phenyl) with silica were carried out in heptane at 80 °C for 24 h. The ²⁹Si and ¹³C CP/MAS spectra of the obtained silica materials clearly showed that the 3-chloropropyldimethylsilyl moieties were cleanly grafted onto silica via a siloxane (Si-O-Si) bond accompanied by the release of the aryl groups. The loading amounts on FSM-type mesoporous silica (TMPS-4) with aryl(3-chloropropyl)dimethylsilanes were comparable to those with 2-propenylsilane and the most commonly used methoxysilane.     

L—氨基酸氧化酶电极的制作及电极特性的研究

报道了一种新的Ｌ－氨基酸氧化酶电极，这种酶电极系由氨气敏电极和以氨基化玻璃布为载体的酶膜所组成；研究了固定化条件对酶膜活性的影响以及底物浓度、温度和ｐＨ对电极响应特性的影响。该电极在６．０×１０＾－５～４．０×１０＾－３ｍｏｌ／Ｌ的底物浓度范围内呈良好的线性关系，检测下限为５．０×１０＾－５ｍｏｌ／Ｌ。在最宜条件下，酶电极具有良好的稳定性。     

烯烃氢甲酰化反应研究进展

本文综述了烯烃氢甲酰化反应的催化剂从钴配合物到铑配合物和从均相催化体系到两相催化体系的发展过程。比较了三种催化剂和两个催化体系的特点、应用情况及研究工作进展.     

聚苯胺尿酸酶电极性能的研究

依据pH对聚苯胺尿酸酶电极最大响应电流的影响, logim～pH图表明尿酸酶电极的催化活性只与其电离基团的碱性形式有关. 扫描电镜的结果表明, 聚苯胺尿酸酶电极的稳定性与其制备方法有关. 电化学法固定的尿酸酶电极具有高的稳定性.     

单壁碳纳米管对C-C键水解酶BphD的固定化性能

采用修饰与未修饰单壁碳纳米管固定C-C键水解酶BphD,并对固定化酶的相对活性、稳定性、重复使用性进行了考察.结果表明,未修饰单壁碳纳米管固定的BphD相对活性为游离态的52.5%,其热稳定性和在变性剂中的稳定性均有所提高,且重复使用10次仍可保持初始活力的90%.修饰单壁碳纳米管固定的BphD相对活性可达99.7%,但其稳定性没有明显提高.同源模建及分子对接分析结果显示,未修饰的单壁碳纳米管对BphD亚基之间的联系可能存在干扰作用,从而对其活性产生影响.     

Immobilization of copper in organic-inorganic hybrid materials: a highly efficient and reusable catalyst for the Ullmann diaryl etherification

The immobilization of copper in organic-inorganic hybrid materials catalyzing the Ullmann reaction has been described. Phenols reacted with aryl iodides, aryl bromides and aryl chlorides smoothly in the presence of a 3-(2-aminoethylamino)propyl functionalized silica gel immobilized copper catalyst. The protocol involved the use of DMSO as the solvent, and potassium fluoride as the base. The reactions generated the corresponding cross-coupling products in good to excellent yields. Furthermore, the silica-supported copper could be recovered and recycled by a simple filtration of the reaction solution and used for 10 consecutive trials without loss of its reactivity.     

Preparation of polymer-supported phosphine from ferrocene for palladium-catalyzed Suzuki-Miyaura cross-coupling reactions

Polymer-supported phosphine ligand 3b derived from ferrocene was prepared,and applied in palladium-catalyzed Suzuki- Miyaura reactions.A range of aryl bromides can couple with phenylboronic acid to obtain corresponding biaryls in excellent yields. The recycling of the polymer-bound catalyst was tested without adding palladium.     

亲水性含环氧基磁性聚合物微球的制备与性能表征

选择甲酰胺作磁性Fe3O4微晶的分散剂,通过设计反相悬浮聚合体系,合成了粒径分布窄、球状亲水性含环氧基磁性聚合物(MGM).利用扫描电子显微镜(SEM)、红外光谱(FT-IR)、X射线粉末衍射仪(XRD)、振动样品磁强计(VSM)和低温N2吸附以及化学分析方法对聚合物进行了性能表征.结果表明,合成的MGM呈球形,且粒度分布较窄,粒径为0.13~0.28 mm的粒子占91%;甲酰胺分散Fe3O4,微晶表面的亲水性进一步增强,单体甲基丙烯酸缩水甘油酯和N,N′-亚甲基双丙烯酰胺交联共聚生成的胶粒能够包埋Fe3O4微晶形成胶核,胶核聚集形成均匀、稳定的MGM微球.MGM中Fe3O4含量为6.17%时,比饱和磁化强度σs达6.5 emu/g;其比表面积、平均孔径和孔容分别为117.6 m2/g,15.6 nm和0.46 cm3/g,表面环氧基团含量为0.53 mmol/g.MGM借助自身的活性环氧基团在十分温和的条件下共价偶联青霉素酰化酶(penicillin G acylase EC 3.5.1.11,简称PGA),制备的固定化酶在37℃下催化水解青霉素G钾生成6-氨基青霉烷酸(6-APA)的表观活性达502IU/g,并且在使用过程中没有出现磁聚集现象.