Post deposition purification of PTCDA thin films

The decomposition of perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA) molecules during evaporation of unpurified raw material in ultra high vacuum was studied. The fragments were identified by mass spectrometry and the influence of these fragments and further contaminations of the raw material on the electronic structure of PTCDA thin films was measured by photoemission spectroscopy. Annealing of contaminated PTCDA films was tested as cheap and easy to perform method for (partial) post deposition purification of the contaminated films.     

双层钙钛矿Sr2FeMoO6，Ba2FeMoO6的电磁性质研究

分析了双层钙钛矿结构的锰氧化合物Sr2FeMoO6,Ba2FeMoO6物相结构和电磁学性质,对巨磁阻效应进行了探讨,揭示了Sr2FeMoO6样品为半导体导电性,Ba2FeMoO6样品为金属导电性.     

空隙中的生长——庄子与芒德勃罗的互读

庄子认为“无”是“道”之本源,“虚”是“道”之禀性,“无”与“虚”蕴藏着勃勃生机。芒德勃罗发现了空集的价值,揭示了自然界虚实相间的生长状态。庄子和芒德勃罗都“以无观有”,认为“无”是“有”潜藏的存在,“无”和“空”是生成万物的根源,在“空隙中生长”是宇宙的常态。芒德勃罗的空集是一种形而下的研究,其指向是现实存在物的实体和空隙合一,是对象性的整体观。庄子之“无”所看重的是人内心世界的空灵,是主客心物合一的非对象性的整体现。     

Detection of NO traces Using resonantly enhanced multiphoton ionization: A method for monitoring atmospheric pollutants

Resonantly enhanced multiphoton ionization (REMPI) is proposed as an ultrasensitive detection method forreal-time monitoring of atmospheric pollutants in situ. The technique is demonstrated in the laboratory for NO diluted in pure nitrogen at 560 mbar. The MPI current resulting from (2+1) photon ionization of NO via the resonantC ² H (v=0) state has been measured for several NO concentrations. Detection levels as low as 50 ppt have been obtained.Laboratoire associé à l'Université de Paris-Sud     

X-Ray Mapping and Interpretation of Scatter Diagrams

Electron beam induced quantitative X-ray mapping has become a very useful characterisation tool for determining the elemental distribution in materials, whether using energy dispersive spectroscopy or wavelength dispersive spectroscopy. The X-ray intensity distributions of the elements from an X-ray map allow us to generate two dimensional and ternary scatter diagrams thus converting spatial information into concentration dimensions, which is an important tool for displaying the spatial relationships of elements or correlated elements (phases) in materials. To best understand how to use this tool, we need to understand the production and features of the scatter diagram. The type of clustering observed in the scatter diagram, whether oval, linear or spherical, can give the major and trace element distributions within phases as well as qualitative and quantitative phase information. This paper demonstrates the generation of scatter diagrams, properties of scatter diagrams, interpretation of scatter diagrams and the advantages of scatter diagrams through the use of examples.     

EPR and XPS measurements of polymeric catalysts doped with hereopolyacids in oxygen adsorption studies

The goal of our studies was to determine the nature of interactions between catalytic active samples, such as polypyrrole (PPy) doped with: chloride anions, heteropolyacids such as H₅PMo₁₀V₂O₄₀, or H₄SiW₁₂O₄₀, and oxygen particles. In order to reveal the mechanism of the linkage between the catalysts and oxygen we provided the electron paramagnetic resonance (EPR) measurements of synthesized samples in O₂ and N₂ flow. Moreover, the X-ray photoelectron spectroscopy (XPS) measurements were performed to show the properties of doped heteropolyacids and the state of nitrogen in polypyrrole matrix. The results of EPR studies of PPy(Cl), PPy(H₄SiW₁₂O₄₀), PPy(H₅PMo₁₀V₂O₄₀) samples, show that the polypyrrole doped with chloride anions interacts much easier with oxygen than polypyrrole doped with heteropolyacids (in the above given order, of preference with the most active polypyrrole system first). It correlates with XPS results, which show that a molybdenium-vanadium anion is more reduced than a silicon-tungsten one. The redox reactions of heteropolyacids involve the oxidation-reduction of the conjugated polymer chain, leaving no or little place for interactions with oxygen. Polypyrrole doped with H₄SiW₁₂O₄₀ shows some oxygen sensitivity as observed in the EPR studies, as opposed to polypyrrole doped with H₅PMo₁₀V₂O₄₀, which is in line with the XPS results.     

Search for a reliable methodology for PSD determination based on a combined molecular simulation-regularization-experimental approach: The case of PHTS materials

We present here a methodology for searching a robust pore size distribution (PSD) for adsorbent materials. The method is based on a combination of individual adsorption isotherms, obtained from Grand Canonical Monte Carlo simulations, a regularization procedure to invert the adsorption integral equation (Tikhonov regularization solved by singular value decomposition), and the needed experimental adsorption isotherm. The selection of several parameters from the available choices to start the procedure are discussed here: the size of the kernel (number of individual pores and number of experimental adsorption points to be included), the fulfillment of the Discrete Picard condition, and the L-curve criteria, all leading to find a reliable and robust PSD. The procedure is applied to plugged hexagonal templated silicas (PHTS), synthesized, and characterized in our laboratory.     

Electrical properties of neodymium doped CaBi4Ti4O15 ceramics

Neodymium doped bismuth layer structure ferroelectrics (BLSFs) ceramics CaBi_4−xNd_xTi₄O₁₅ (x=0, 0.25, 0.50, 0.75) were prepared by solid-state reaction method. X-ray diffraction pattern showed that single phase was formed when x=0-0.75. The refined lattice parameters showed that a (b) axes decrease at x=0.25 and increase with more Nd³⁺ dopant. The effects of Nd³⁺ doping on the dielectric and ferroelectric properties of CaBi₄Ti₄O₁₅ ceramics are studied. Nd³⁺ dopant decreased the Curie temperature linearly, and the dielectric loss, tan δ, as well. The remnant polarization of Nd³⁺ doped CaBi₄Ti₄O₁₅ ceramics was increased by 80% at x=0.25, while more Nd³⁺ dopant decreased the remnant polarization. CaBi_3.75Nd_0.25Ti₄O₁₅ ceramics had the largest piezoelectric constant d₃₃. The structure and properties of CaBi_4−xNd_xTi₄O₁₅ ceramics showed that Nd³⁺ may occupy different crystal locations when Nd³⁺ content x is less than 0.25 and more than 0.50.     

The effects of crystal structure on optical absorption/photoluminescence of bis(8-hydroxyquinoline)zinc

In this paper, the transformation processes of two types of bis(8-hydroxyquinoline)zinc: Znq₂ dihydrate and anhydrous (Znq₂)₄ were investigated by X-ray diffraction (XRD), infrared spectra (IR), scanning electron microscope (SEM), differential scanning calorimetry (DSC) and thermogravimetry (TG). The effects of crystal structure on optical properties of bis(8-hydroxyquinoiline)zinc were analyzed. Znq₂ dihydrate can be transformed into anhydrous (Znq₂)₄ during heating under vacuum. Reversal transformation occurs by the interaction between chloroform and (Znq₂)₄. But (Znq₂)₄ was partially transformed into Znq₂ dihydrate by the interaction between ethanol and (Znq₂)₄. The different molecular structure results in different crystal stacking and electronic structure, thereby affect its optical properties.     

Analysis of a 2D “liquid”plasma lattice

Adustyplasmacanbedefinedasacomplicatedplasmacontainingsmallsolidmattercalleddustgrainsordustparticles,whichareusuallychargednegatively,duetoelectronshighermobilitythanion,bycollectingelectronsandionsfromthebackgroundplasma.Theuniverseisfilledwithdustyplasmassuchasplanetaryrings,comettails,andnebulae.Also,inindustrialplasmaprocessing,particulatessuspendedinplasmaarethemajorcontaminationinsemiconductormanufacture.Studiesondustyplasmahavebeenextendedtofar-flungtopicssuchaswaves,instabilities,stro…