Paraquat guest induced hydrogen-bonding modes of a hydrazide-derived bis(meta-phenylene)-32-crown-10 host in the solid state

A hydrazide-derived bis(meta-phenylene)-32-crown-10 host showed a dimeric structure via quadruple N-H?O hydrogen bonds, but a polymeric structure via two N-H?O hydrogen bonds and two C-H?O hydrogen bonds at each knot in the presence of paraquat in the solid state, which led to a novel poly(taco complex) and ordering arrangement of the guest molecules indirectly.     

纸带-光纤技术对硫化氢气体测量的初探

以研制的光导纤维反射分光光度计为仪器,建立了根据浸渍醋酸铅的纸带与硫化氢反应生成黑色硫化铅斑点而改变纸带相对反射率,达到对H2S测量的新方法。测量波长为450nm,测量H2S浓度范围为5×10-8mol/L～1.35×10-6mol/L。方法可用于测量废气中的硫化氢。     

UV-Vis-草酸铁络合物-H_2O_2体系产生羟自由基的Fe(phen)_3~(2+)光度法测定

UV-Vis-草酸铁络合物 -H2O2 法是一种新的高级氧化工艺 ,该工艺产生的羟自由基·OH具有极强的氧化能力 ,可与水中大多数有机物迅速反应而使其降解 ;用Fe(phen)32+ 光度法研究了该体系中羟自由基·OH产生的规律 ,·OH可将Fe(phen)32+(Fe2 +-菲咯啉络合物)氧化成Fe(phen)33+(Fe3 +-菲咯啉络合物),通过测定Fe(phen)32+ 在508nm处吸光度的变化可间接求出·OH的生成量 ;结果表明 ,在 pH=4.0,n(Fe2+)∶n(H2O2)∶n(C2O42-)=1∶5∶10(化学计量数 )时 ,·OH的生成量最大;该分析方法具有简单、快速的优点     

Helical tubulate inclusion compounds of ferrocene and squalene

The inclusion compounds of 2,8-dimethyltricyclo[5.3.1.1^3,9]dodecane-syn-2,syn-8-diol,3, with ferrocene and with squalene have been prepared. The crystal structures of these helical tubulate compounds: (3)₃·(ferrocene)_0.75 [P3₁21,a=b=13.7480(6),c=7.0312(5) Å,Z=1,R=0.038] and (3)₃·(squalene)_0.23 [P3₁21,a=b=13.677(1),c=7.0533(9) Å,Z=1,R=0.042] are described. Supplementary Data relating to this article are deposited with the British Library as supplementary publication No. SUP 82151 (16 pages).     

氢气对氯硅烷功能化非共轭α,ω-双烯烃和丙烯共聚物链结构的影响

基于Ziegler-Natta催化剂的氯硅烷功能化非共轭α,ω-双烯烃与丙烯共聚,在水的引发下脱水缩合可有效地形成长支链结构的聚丙烯树脂.而氢气常作为丙烯聚合中的链转移剂,调控聚丙烯的分子量,基于此,研究了氢气对氯硅烷功能化非共轭α,ω-双烯烃与丙烯共聚物链结构的影响.核磁共振氢谱(~1H-NMR)测试结果表明,氢气抑制了氯硅烷功能化非共轭α,ω-双烯烃的插入,随着氢气用量的增加,共聚物分子链中端基乙烯基含量由0.12 mol%降低到0.05 mol%.熔体流变行为测试结果显示,聚合物熔体的储能模量、损耗模量和零剪切黏度均随着氢气用量增加而降低,这主要是由于相对分子质量减小和长支链密度的减少.     

Hydrogen transport through Pd-Ni alloy electrodeposited on Pd substrate

Hydrogen transport through a Pd-Ni alloy electrodeposited on a Pd substrate (Pd-Ni/Pd bilayer symmetric electrode) has been investigated using cyclic voltammetry and a.c. impedance spectroscopy combined with the electrochemical hydrogen permeation method. The permeation build-up current transients and the measured impedance spectra were analyzed using the time-lag method for the bilayer electrode and a complex non-linear least squares data-fitting method based upon the derived Faradaic admittance for the hydrogen absorption into and diffusion through the bilayer electrode under the permeable boundary condition, respectively. The value of the hydrogen diffusivity in the Pd-Ni layer was lower than that in the Pd layer. Furthermore, the values of the charge transfer resistance and equilibrium absorption constant for the Pd-Ni/Pd bilayer electrode were higher than those for the Pd single layer electrode. From the experimental results, the role of the thin Ni(OH)₂ film formed on the Pd-Ni layer surface in the hydrogen transport through the Pd-Ni/Pd bilayer electrode is discussed in terms of its passivating effect and extremely large hydrogen solubility. Received: 22 January 1997 / Accepted: 15 April 1997     

Pt immobilized spontaneously on porous MXene/MAX hybrid monolith for hydrogen evolution reaction

Designing efficient electrocatalysts with low Pt loadings for hydrogen evolution reaction(HER) is urgently required for renewable and sustainable energy conversion.Here,we report a strategy that Pt nanoparticulates are spontaneously immobilized on porous MXene/MAX monolith as HER catalysts by utilizing the redox reaction between Ti_3C_2T_x MXene and [PtCl_4]~2 in H_2 PtCl_6 aqueous solution.By taking advantage of homogeneously distributed Pt nanoparticulates on highly electrically conductive porous Ti_3C_2T_x/Ti_3AlC_2 monolith,the as-prepared electrocatalysts show high catalytic performance for hydrogen evolution.Specifically,the binder-free electrocatalysts have Pt loadings as low as 8.9 μg/cm~2,with low overpotential of 43 mV at a curre nt density of 10 mA/cm~2 and low Tafel slope that three times lower than porous Ti_3C_2T_x/Ti_3AlC_2 without Pt loading.This strategy offers a new approach to constructing ultra-low Pt-loading HER catalysts on the basis of in situ redox reaction between noble metal ions and MXenes.     

变温红外光谱研究多嵌段聚氨脂脲的微相分离行为

用傅里叶变换红外光谱方法研究了热处理对由聚环氧丙烷聚醚多元醇、３．５－二乙基甲苯二胺和４，４－二苯基甲烷二异氰酸酯组成的多嵌段聚氨酯脲（ＳＰＵＵ）的微相分离行为的影响．从室温逐步升温到３１０℃的过程中，氨基甲酸酯键（ＵＴ）之间形成的氢键大量解离，而脲键（ＵＡ）之间形成的、具有平面状双分叉结构的氢键在１３０～２００℃范围却大量生成；从３１０℃缓慢冷却到室温后，部分游离的ＵＴ重新形成氢键，而硬段之间形成的ＵＡ氢键的含量又有所增加．结果表明：高温热处理可以有效地提高ＳＰＵＵ的微相分离程度．     

Improvement in hydrogen storage performance of Mg by mechanical grinding with molten salt etching Ti3C2Clx

Mg-based materials are currently a hot research topic as hydrogen storage materials due to their considerable theoretical hydrogen storage capacity. However, the kinetic performance of hydrogen absorption and desorption of Mg is too slow and requires high temperature, which seriously hinders the application of this material. MXene is a new type of two-dimensional material with significant role in improving thermodynamics and kinetics. In this experiment, a two-dimensional layered MXene containing Cl functional group was prepared by molten salt etching using the Ti-containing MAX phase as the raw material. Then different ratios of Ti₃C₂Cl_x were uniformly dispersed onto the surface of Mg by high energy ball milling. The samples were characterized by hydrogen absorption and desorption kinetics, SEM, XRD, XPS, and DSC to investigate the effect of Ti₃C₂Cl_x on the hydrogen absorption and desorption performance of Mg. The onset hydrogen absorption temperature can be reduced to room temperature and the hydrogen release temperature is reduced by 200 ​°C by doping Ti₃C₂Cl_x. And there is also 5.4 ​wt% hydrogen storage in the isothermal hydrogen absorption test at 400 ​°C. The results of DSC demonstrate that the E_a of Mg+15 ​wt% Ti₃C₂Cl_x was reduced by 12.6% compared to pristine Mg. The ΔH is almost invariable. The results of XPS show that the presence of multivalent Ti promotes electron transfer and thus improves the conversion between Mg²⁺/Mg and H⁻/H. This study provides a guideline for further improving the hydrogen absorption and desorption performance of Mg-based hydrogen storage materials.     

The relative importance of temperature and isotope effects on the dipole oscillator strength distribution of H2

Summary The calculation of the effects of temperature and isotopic composition on the energy weighted moments of the dipole oscillator strength distribution of H₂ in the random phase approximation to the polarization propagator are reported. It is seen that the effect of isotopic composition is small, while that of temperature is of an order accessible to experiment. We find that all the mean excitation energiesI , for =–1, 0, 1, decrease with temperature as does the dipole oscillator strength momentS() for >0, while the opposite is true for <0. These effects are interpreted in terms of the bond length dependence of the excitation energies.