道化学火灾、爆炸危险指数评价法在轻烃储罐中的应用

用道化学火灾、爆炸危险指数评价法对轻烃储罐进行风险评价,得出其安全措施补偿前后的火灾、爆炸指数以及暴露面积、危害系数等,确定危险等级.并由此得出轻烃储罐在安全措施方面的不足,提出改进措施.在实例的基础上总结道化学方法用在轻烃储罐上的缺陷之处.     

川西坳陷孝-新-合地区须家河组烃源岩地化特征对比及评价

川西坳陷孝泉-新场-合兴场地区须家河组发育大套优质烃源岩．通过一系列有机地球化学分析方法对其各个层段的有机质丰度、有机质类型和有机质成熟度进行了研究对比,认为该区须家河组烃源岩除小塘子-马鞍塘组和须三、须五段主要的烃源岩段较为发育外,须二、须四段也发育相对较好的烃源岩,这些储层段中发育的烃源岩构成了成藏子系统发育的基础;烃源岩有机质丰度高,有机质类型主要为Ⅲ型、部分为Ⅱ,型,有机质成熟度高,且随深度增大各项反映成熟度的指标值均逐渐增大;有机碳含量和成熟度的平面分布除丰谷地区须三段相对最高外,其他层段均表现为西高东低的特征。     

Hydrocarbon group-type analysis of coal liquids by high-performance liquid chromatography

Summary A rapid method is described for the determination of hydrocarbon groups in coal liquids. Analysis is carried out by high-performance liquid chromatography on a LiChrosorb NH₂ column with n-hexane as the mobile phase. The separation is controlled only by the number of double bonds in a given hydrocarbon molecule. It is essentially independent of the molecular mass for a large variety of compounds investigated. Example of the separation of hydrogenated derivatives of anthracene and of a coal liquid fraction are presented.     

Modeling alcohol + water + hydrocarbon mixtures with the group contribution with association equation of state GCA-EoS

The growing interest on first- and second-generation biofuels requires the development of thermodynamic tools with predictive capacity for mixtures containing a wide variety of organo-oxygenated compounds, water and hydrocarbons. Modeling this type of mixtures is challenging due to the presence of association and solvation effects. In this work, we present a revision of the group contribution with association equation of state (GCA-EoS) parameters, with the purpose of extending and improving the predictive capacity of the model for systems containing water, alcohols and hydrocarbons.     

Spectroscopic and Chromatographic Identification of Hydrocarbon Group Types in Pakistani Crude Oils

Two crude oil samples collected from Paniro and Tangri (Sindh) southern Pakistan. The distillate fractions of both crude oil samples were analysed by U.V‐visible spectrophotometer and column chromatography for hydrocarbon group types. It was found from the physico‐chemical study of these crude oils that Tangri crude oil contains mostly paraffinic contents while Paniro crude oil samples are rich in aromatics. It was concluded from all the experiments that Tangri crude oil is paraffinic in nature; while Paniro crude oil is naphthenic in nature, further it was observed that Tangri crude oil processing would be environmentally friendly compared to Paniro crude oil, because Paniro crude contains a high amount of polyaromatics.     

Cu、K助剂对FeMn/SiO2催化费托合成的影响

研究了Cu、K助剂对共沉淀型FeMn/SiO2催化剂还原行为、吸附行为及费托(F-T)合成活性和选择性的影响. Cu助剂以与Fe、Mn、SiO2共沉淀的方式引入, 而K助剂是在喷雾干燥前均匀加入沉淀浆料引入的. 结果表明, Cu可明显提高催化剂的还原性能, K助剂能促进催化剂在CO中的还原但抑制在H2中的还原, 而同时加入Cu和K会进一步促进催化剂在H2或CO中的还原; Cu助剂能促进H2吸附而K助剂对H2吸附无明显影响; Cu在一定程度上提高了F-T合成活性, 缩短了反应诱导期, K明显促进了CO的转化而相对抑制了H2的转化, 并且延长了反应的诱导期, Cu与K协同作用不仅提高反应的转化率而且缩短了反应的诱导期; K使得烃产物平均分子量增加, Cu单独对烃产物分布影响不明显, 而与K共同作用会进一步增加烃产物的分子量.     

氢、碳氢燃料对向扩散火焰

A comprehensive analysis of hydrogen/oxygen and hydrocarbon/oxygen counterflow diffu-sion flames has been conducted using corresponding detailed reaction mechanisms. The hydrocarbon fuels contain n-alkanes from CH₄ to C₁₆H₃₄. The basic diffusion flame struc-tures are demonstrated, analyzed, and compared. The effects of pressure, and strain rate on the flame behavior and energy-release rate for each fuel are examined systematically. The de-tailed chemical kinetic reaction mechanisms from Lawrence Livermore National Laboratory(LLNL) are employed, and the largest one of them contains 2115 species and 8157 reversible reactions. The results indicate for all of the fuels the flame thickness and heat release rate correlate well with the square root of the pressure multiplied by the strain rate. Under the condition of any strain rate and pressure, H₂ has thicker flame than hydrocarbons, while the hydrocarbons have the similar temperature and main products distributions and almost have the same flame thickness and heat release rate. The result indicates that the fuels composed with these hydrocarbons will still have the same flame properties as any pure n-alkane fuel.     

Adsorption of toluene, methylcyclohexane and neopentane on silica MCM-41

Adsorption-desorption isotherms of toluene, methylcyclohexane and neopentane were determined on a silica MCM-41 material of pore diameter ∼3.4 nm over the temperature range 258 K to 308 K (278 K for neopentane). The isosteric enthalpies of adsorption were determined from the isotherms at the various temperatures. It was found that the isotherms of toluene and methylcyclohexane have a similar variation with the temperature, exhibiting hysteresis at 268 K and at lower temperature, while the adsorption of neopentane is reversible at all temperatures. The three organic adsorptives interact differently with the silica surface and the isosteric enthalpies of adsorption indicated that methylcyclohexane has the weakest interaction and toluene the strongest. A slight increase in the adsorption enthalpy at the beginning of the capillary condensation step is observed with methylcyclohexane and neopentane but not with toluene.     

Modifying the response of a polymer-based quartz crystal microbalance hydrocarbon sensor with functionalized carbon nanotubes

This report compares the performance of polymer and carbon nanotube-polymer composite membranes on a quartz crystal microbalance (QCM) sensor for the detection of aromatic hydrocarbons (benzene, toluene, ethylbenzene, p-xylene and naphthalene) in aqueous solutions. Several different polymers (polystyrene, polystyrene-co-butadiene, polyisobutylene and polybutadiene) and types of functionalized carbon nanotubes (multi-walled and single-walled carbon nanotubes) were investigated at varying carbon nanotube (CNT) loading levels and film thicknesses. In a majority of instances, the difference in response between membranes comprising pure polymer and membranes containing 10% (w/w) carbon nanotubes were not statistically significant. However, a notable exception is the decreasing sensitivity towards p-xylene with increasing carbon nanotube content in a polybutadiene film. This variation in sensitivity can be attributed to a change in the sorption mechanism from absorption into the polymer phase to adsorption onto the carbon nanotube sidewalls. With much thicker coatings of 10% (w/w) carbon nanotube in polybutadiene, the sensitivity towards toluene was higher compared to the pure polymer. The increased toluene sensitivity may be partially attributed to an increase in the sorption capacity of a carbon nanotube polymer composite film relative to its corresponding pure polymer film. Attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) measurements were performed to understand the mechanism of sorption and these studies showed that the addition of functionalized CNT to the polymer increases the absorption of certain types of hydrocarbons. This study demonstrates that carbon nanotubes can be incorporated into a polymer-coated QCM sensor and that composite films may be used to modify the QCM response and selectivity during the analysis of complex hydrocarbon mixtures.